 |
Statalist archive (ordered by date)
(last updated Sun Feb 28 16:00:02 2010)
- st: RE; R for Stata Users
- From: "Airey, David C" <david.airey@Vanderbilt.Edu>
- st: RE: System GMM and fixed effects - xtabond2
- From: Rodolphe Desbordes <rodolphe.desbordes@strath.ac.uk>
- st: Missing data analysis
- From: Rosie Chen <jiarongchen2002@yahoo.com>
- st: System GMM and fixed effects - xtabond2
- From: "Zohal Hessami" <Zohal.Hessami@uni-konstanz.de>
- RE: st: RE: Display of Shea's partial R^2 in ivreg2 output
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- RE: st: Repeated time values within panel in levpet STATA output
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: Repeated time values within panel in levpet STATA output
- From: sjsamuels@gmail.com
- RE: st: Repeated time values within panel in levpet STATA output
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: RE: percent symbols in catplot
- From: Eric Booth <ebooth@ppri.tamu.edu>
- Re: st: Repeated time values within panel in levpet STATA output
- From: sjsamuels@gmail.com
- RE: st: Repeated time values within panel in levpet STATA output
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: Repeated time values within panel in levpet STATA output
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: R for Stata Users
- From: "Muenchen, Robert A (Bob)" <muenchen@utk.edu>
- Re: st: RE: Display of Shea's partial R^2 in ivreg2 output
- From: "Tom Palmer" <Tom.Palmer@bristol.ac.uk>
- st: RE: percent symbols in catplot
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: test for clustering in instrumental variables settings
- From: Austin Nichols <austinnichols@gmail.com>
- st: RE: Repeated time values within panel in levpet STATA output
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE; R for Stata Users
- st: RE: re: xtivreg2 - Incomplete computation of first stage regression
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: re: xtivreg2 - Incomplete computation of first stage regression
- From: Kit Baum <baum@bc.edu>
- RE: st: xtivreg2 - Incomplete computation of first stage regression
- From: DE SOUZA Eric <eric.de_souza@coleurope.eu>
- st: Repeated time values within panel in levpet STATA output
- From: Worku Gebeyehu <workugeb@yahoo.com>
- st: xtivreg2 - Incomplete computation of first stage regression
- From: "Lim Boon Leong" <lboonl@streamyx.com>
- st: AW: xtivreg2 - Incomplete computation of first stage regression
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: R for Stata Users
- st: bootstrap in factor analysis
- From: Thu Phuong Truong <Phuong.Truong@vuw.ac.nz>
- st: bootstrap in factor analysis
- From: Thu Phuong Truong <Phuong.Truong@vuw.ac.nz>
- st: AW: bootstrap in factor analysis
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: endogenous dummy as well as an endogenous outcome
- From: "Sascha Steffen" <steffen@bank.bwl.uni-mannheim.de>
- st: AW: endogenous dummy as well as an endogenous outcome
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: test for clustering in instrumental variables settings
- From: "Sergio I Prada" <sprada1@umbc.edu>
- st: RE: controlling display formats in macros
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: moptimize lf2 evaluator syntax -- manual wrong again?
- From: Jeffrey Pitblado <jpitblado@stata.com>
- st: moptimize lf2 evaluator syntax -- manual wrong again?
- From: László Sándor <sandorl@gmail.com>
- Re: st: controlling display formats in macros
- From: Eric Booth <ebooth@ppri.tamu.edu>
- st: re: controlling display formats in macros
- From: Kit Baum <baum@bc.edu>
- st: controlling display formats in macros
- From: "Campbell, Richard T." <dcamp@uic.edu>
- st: Second call for papers: Stata Conference Boston, 15-16 July 2010
- From: Kit Baum <baum@bc.edu>
- Re: st: Number of degrees of freedom
- From: Richard Goldstein <richgold@ix.netcom.com>
- Re: st: R for Stata Users
- From: Fred Wolfe <fwolfe@arthritis-research.org>
- st: RE: re: RE: re: Seeing Double - issues with quotation marks
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: scale and spmap
- From: Maurizio Pisati <maurizio.pisati@unimib.it>
- st: Number of degrees of freedom
- From: Nikolaos Pandis <npandis@yahoo.com>
- st: re: RE: re: Seeing Double - issues with quotation marks
- From: Kit Baum <baum@bc.edu>
- Re: st: RE: re: Seeing Double - issues with quotation marks
- From: Michael Hanson <mshanson@mac.com>
- Re: st: RE: percent symbols in catplot
- From: Eric Booth <ebooth@ppri.tamu.edu>
- Re: st: Seeing Double - issues with quotation marks
- From: Michael Hanson <mshanson@mac.com>
- Re: st: RE: Descriptives using multiple-imputed complex survey design data
- From: Rosie Chen <jiarongchen2002@yahoo.com>
- RE: st: RE: percent symbols in catplot
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: RE: percent symbols in catplot
- From: Eric Booth <ebooth@ppri.tamu.edu>
- st: RE: re: Seeing Double - issues with quotation marks
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: RE: percent symbols in catplot
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: re: Seeing Double - issues with quotation marks
- From: Christopher Baum <baum@bc.edu>
- Re: st: RE: percent symbols in catplot
- From: Eric Booth <ebooth@ppri.tamu.edu>
- st: RE: percent symbols in catplot
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Statistical consulting fees
- From: SR Millis <srmillis@yahoo.com>
- st: RE: percent symbols in catplot
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: percent symbols in catplot
- From: Eric Booth <ebooth@ppri.tamu.edu>
- st: RE: Display of Shea's partial R^2 in ivreg2 output
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- Re: st: Seeing Double - issues with quotation marks
- From: sjsamuels@gmail.com
- st: Display of Shea's partial R^2 in ivreg2 output
- From: "Tom Palmer" <Tom.Palmer@bristol.ac.uk>
- Re: st: R for Stata Users
- From: "Ben Dwamena" <bdwamena@med.umich.edu>
- Re: st: R for Stata Users
- From: "Ben Dwamena" <bdwamena@med.umich.edu>
- RE: Re: st: RE: regression r(103): too many variables
- From: Paul Higgins <pahiggins@LRCA.com>
- RE: st: Seeing Double - issues with quotation marks
- From: "Craig, Benjamin M." <Benjamin.Craig@moffitt.org>
- Re: st: R for Stata Users
- From: Fred Wolfe <fwolfe@arthritis-research.org>
- Re: st: Seeing Double - issues with quotation marks
- From: Daniel Miller <danielpmiller@gmail.com>
- Re: st: scale and spmap
- From: Scott Merryman <scott.merryman@gmail.com>
- Re: st: spmap myseriously dropping a category
- From: Dorothy Bridges <dbstata@gmail.com>
- st: Seeing Double - issues with quotation marks
- From: "Craig, Benjamin M." <Benjamin.Craig@moffitt.org>
- Re: st: lat long coordinates and spmap
- From: Scott Merryman <scott.merryman@gmail.com>
- Re: st: spmap myseriously dropping a category
- From: Scott Merryman <scott.merryman@gmail.com>
- Re: st: R for Stata Users
- From: "Airey, David C" <david.airey@Vanderbilt.Edu>
- Re: st: Re: low values of sigma v in frontier analysis
- From: Scott Merryman <scott.merryman@gmail.com>
- st: RE: spmap myseriously dropping a category
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: optimize()
- From: Federico Belotti <belotti@economia.uniroma2.it>
- st: mata error using optimize()
- From: Federico Belotti <f.belotti@econometrics.it>
- Re: st: R for Stata Users
- From: Stas Kolenikov <skolenik@gmail.com>
- st: spmap myseriously dropping a category
- From: Dorothy Bridges <dbstata@gmail.com>
- RE: st: Fill
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: Fill
- From: Scott Merryman <scott.merryman@gmail.com>
- RE: st: R for Stata Users
- From: "Airey, David C" <david.airey@Vanderbilt.Edu>
- st: Statistical consulting fees
- From: Eduardo Nunez <enunezb@gmail.com>
- RE: st: R for Stata Users
- From: "Cohen, Elan" <cohened@upmc.edu>
- Re: st: R for Stata Users
- From: Stas Kolenikov <skolenik@gmail.com>
- RE: st: R for Stata Users
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: Fill
- From: Tiago Fonseca <tiago.p.fonseca@gmail.com>
- st: AW: Fill
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: R for Stata Users
- From: "Airey, David C" <david.airey@Vanderbilt.Edu>
- Re: st: mixlogit log normal distribution restriction problems
- From: Arne Risa Hole <arnehole@gmail.com>
- Re: st: AW: about multinomial logit model for panel
- From: Arne Risa Hole <arnehole@gmail.com>
- RE: st: R for Stata Users
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- re: st: R for Stata Users
- From: "Airey, David C" <david.airey@Vanderbilt.Edu>
- st: lat long coordinates and spmap
- From: "Vitorino, Maria Ana" <vitorino@wharton.upenn.edu>
- st: spatgsa weights matrix
- From: HAIFA ZGHONDA <haifa.zghonda85@gmail.com>
- st: Re: low values of sigma v in frontier analysis
- From: "Rao, James" <James.Rao@agr.uni-goettingen.de>
- Re: st: Question on spmap and region aggregation
- From: "Vitorino, Maria Ana" <vitorino@wharton.upenn.edu>
- st: mixlogit log normal distribution restriction problems
- From: Sorada Tapsuwan <sorada_tapsuwan@hotmail.com>
- st: scale and spmap
- From: "Vitorino, Maria Ana" <vitorino@wharton.upenn.edu>
- RE: AW: st: Why my codes run well on version 9.1 but not on version 10
- From: "Tharyan, Rajesh" <R.Tharyan@exeter.ac.uk>
- Re: st: Why my codes run well on version 9.1 but not on version 10
- From: Quang Nguyen <quangn@gmail.com>
- AW: st: Why my codes run well on version 9.1 but not on version 10
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- AW: st: Why my codes run well on version 9.1 but not on version 10
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: Why my codes run well on version 9.1 but not on version 10
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: AW: st: Why my codes run well on version 9.1 but not on version 10
- From: Simon <scmoore.lists@googlemail.com>
- Re: st: Why my codes run well on version 9.1 but not on version 10
- From: Neil Shephard <nshephard@gmail.com>
- Re: st: Why my codes run well on version 9.1 but not on version 10
- From: Quang Nguyen <quangn@gmail.com>
- Re: st: SPHDIST, creating pairs
- From: TA Stat <tastat@gmail.com>
- Re: st: test for clustering in instrumental variables settings
- From: Stas Kolenikov <skolenik@gmail.com>
- st: ml model
- From: "Andres Otero" <a.otero@ucl.ac.uk>
- st: test var
- From: mai7777 <mai7777@gmail.com>
- RE: st: Reconcile Log Transformed with Untransformed Results
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: SPHDIST, creating pairs
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: Reconcile Log Transformed with Untransformed Results
- From: Austin Nichols <austinnichols@gmail.com>
- Re: AW: st: SUREG: Testing sum of coefficients
- From: mai7777 <mai7777@gmail.com>
- re: st: SPHDIST, creating pairs
- From: Christopher Baum <kitbaum@mac.com>
- st: RE: SPHDIST, creating pairs
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: SPHDIST, creating pairs
- From: Austin Nichols <austinnichols@gmail.com>
- st: SPHDIST, creating pairs
- From: "Tomeka Davis" <soctmd@langate.gsu.edu>
- Re: Re: st: RE: regression r(103): too many variables
- From: sjsamuels@gmail.com
- Re: st: Urgent-Help
- From: Austin Nichols <austinnichols@gmail.com>
- st: Urgent-Help
- From: "A. Sen" <as934@cam.ac.uk>
- st: SVAR Impulse-Response
- From: Sergio Poblete <spoblete@hacienda.gov.cl>
- Re: st: listing groups that differ from predicted results in logit
- From: Michael Norman Mitchell <Michael.Norman.Mitchell@gmail.com>
- Re: st: test for clustering in instrumental variables settings
- From: Austin Nichols <austinnichols@gmail.com>
- st: Inconsistent results with rocfit
- From: Paul Seed <paul.seed@kcl.ac.uk>
- RE: st: AW: create a dataset or vector of variable names
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: RE: creating variables using 'by' for subsets of records
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: AW: create a dataset or vector of variable names
- From: "Sheena Sullivan" <sheena.sullivan@gmail.com>
- Re: st: Reconcile Log Transformed with Untransformed Results
- From: Erasmo Giambona <e.giambona@gmail.com>
- Re: st: Breaking one string variable into several new variables
- From: Anna Rakhman <amr0084@gmail.com>
- RE: st: Reconcile Log Transformed with Untransformed Results
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- RE: st: How to make ID as 01 instead of 1
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: test for clustering in instrumental variables settings
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: RE: AW: Macro dissapears after forval or foreach
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: AW: dyadic dataset w string id
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: dyadic dataset w string id
- From: Sorin Krammer <skrammer@mit.edu>
- Re: st: How to make ID as 01 instead of 1
- From: Hưng Đoàn Quang <dqhung278@gmail.com>
- Re: st: test for clustering in instrumental variables settings
- From: Stas Kolenikov <skolenik@gmail.com>
- RE: st: Why my codes run well on version 9.1 but not on version 10
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: long run restrictions in structural var (SVAR)
- From: Fabian Irek <fabian.irek@student.uni-tuebingen.de>
- st: RE: pca, score is not valid
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: Random Effects model with Dynamics
- From: Rodolphe Desbordes <rodolphe.desbordes@strath.ac.uk>
- st: cnsreg
- From: "Kaganova, Yevgeniya" <ykaganova@rti.org>
- Re: st: cnsreg
- From: Tirthankar Chakravarty <tirthankar.chakravarty@gmail.com>
- st: AW: about multinomial logit model for panel
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: about multinomial logit model for panel
- From: 陳依婷 <st340288@gmail.com>
- st: Random Effects model with Dynamics
- From: "Lee, Albert" <Albert.Lee@hud.gov>
- st: AW: cnsreg
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: cnsreg
- From: "Kaganova, Yevgeniya" <ykaganova@rti.org>
- Re: st: listing groups that differ from predicted results in logit
- From: David Souther <davidsoutheremail@gmail.com>
- st: Small dimension panel: Estimation and diagnostics
- From: sds001@berkeley.edu
- Re: st: listing groups that differ from predicted results in logit
- From: Daniel Miller <danielpmiller@gmail.com>
- Re: st: listing groups that differ from predicted results in logit
- From: David Souther <davidsoutheremail@gmail.com>
- st: test the coefficients in multinominal logit model
- From: atsu june <amino6121@live.jp>
- st: pca, score is not valid
- From: Asri Yusrina <ayusrina@smeru.or.id>
- Re: st: RE: Descriptives using multiple-imputed complex survey design data
- From: sjsamuels@gmail.com
- Re: st: Why my codes run well on version 9.1 but not on version 10
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- Re: st: Why my codes run well on version 9.1 but not on version 10
- From: Phil Schumm <pschumm@uchicago.edu>
- Re: st: AW: esttab - parentheses around semean
- From: Miranda Kim <mk@mrc.soton.ac.uk>
- st: Question on spmap and region aggregation
- From: <Stefan.Gawrich@hlpug.hessen.de>
- st: AW: Why my codes run well on version 9.1 but not on version 10
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Reconcile Log Transformed with Untransformed Results
- From: Erasmo Giambona <e.giambona@gmail.com>
- st: Why my codes run well on version 9.1 but not on version 10
- From: Quang Nguyen <quangn@gmail.com>
- st:reg3, simultaneous equation model, instrumental variables
- st: AW: esttab - parentheses around semean
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- re: AW: st: SUREG: Testing sum of coefficients
- From: Kit Baum <baum@bc.edu>
- re: st: SUREG: Testing sum of coefficients
- From: Kit Baum <baum@bc.edu>
- st: esttab - parentheses around semean
- From: Miranda Kim <mk@mrc.soton.ac.uk>
- st: New -hte- package available from SSC
- From: Kit Baum <baum@bc.edu>
- st: AW: Bug? proportion not using value labels
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: LSM smoothing
- From: <IliaN@gertner.health.gov.il>
- st: Polynomial/Quadritic trend in residuals
- From: "Abdul Q Memon" <a.memon@ucl.ac.uk>
- AW: st: SUREG: Testing sum of coefficients
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- AW: st: Breaking one string variable into several new variables
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Bug? proportion not using value labels
- From: Tirthankar Chakravarty <tirthankar.chakravarty@gmail.com>
- st: Bug? proportion not using value labels
- From: "Zoe Hyde" <zhyde@meddent.uwa.edu.au>
- Re: st: GAM in survey commands
- From: "Priscilla Martinez" <priscilla.martinez@medisin.uio.no>
- Re: st: SUREG: Testing sum of coefficients
- From: mai7777 <mai7777@gmail.com>
- Re: st: SUREG: Testing sum of coefficients
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: SUREG: Testing sum of coefficients
- From: mai7777 <mai7777@gmail.com>
- Re: st: RE: Descriptives using multiple-imputed complex survey design data
- From: Rosie Chen <jiarongchen2002@yahoo.com>
- Re: st: listing groups that differ from predicted results in logit
- From: Michael Norman Mitchell <Michael.Norman.Mitchell@gmail.com>
- Re: st: Can Stata underline?
- From: Michael Norman Mitchell <Michael.Norman.Mitchell@gmail.com>
- st: listing groups that differ from predicted results in logit
- From: David Souther <davidsoutheremail@gmail.com>
- st: Re: st: test the coefficients in multinominal logit model
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: Re: st: test the coefficients in multinominal logit model
- From: Ian Breunig <ianbreunig@gmail.com>
- st: Re: st: test the coefficients in multinominal logit model
- From: Tirthankar Chakravarty <tirthankar.chakravarty@gmail.com>
- st: weighting scores to use in a higher level analysis
- From: Hao Tan <Hao.Tan@uts.edu.au>
- st: test the coefficients in multinominal logit model
- From: atsu june <amino6121@live.jp>
- st: SUR in Long Format
- From: mai7777 <mai7777@gmail.com>
- Re: st: Breaking one string variable into several new variables
- From: Tirthankar Chakravarty <tirthankar.chakravarty@gmail.com>
- Re: st: Breaking one string variable into several new variables
- From: Eric Booth <ebooth@ppri.tamu.edu>
- RE: Re: st: RE: regression r(103): too many variables
- From: Paul Higgins <pahiggins@LRCA.com>
- st: Breaking one string variable into several new variables
- From: Anna Rakhman <amr0084@gmail.com>
- st: test for clustering in instrumental variables settings
- From: "Sergio I Prada" <sprada1@umbc.edu>
- Re: st: RE: regression r(103): too many variables
- From: sjsamuels@gmail.com
- Re: st: GAM in survey commands
- From: Stas Kolenikov <skolenik@gmail.com>
- Re: st: RE: Descriptives using multiple-imputed complex survey design data
- From: sjsamuels@gmail.com
- st:estat ic
- From: Mariana Barbosa <maris_can5@yahoo.com>
- Re: st: propensity score matching with caliper
- From: Austin Nichols <austinnichols@gmail.com>
- st: propensity score matching with caliper
- From: Scott Strassels <scotts1@mail.utexas.edu>
- Re: st: Can Stata underline?
- From: Eric Booth <ebooth@ppri.tamu.edu>
- Re: st: GAM in survey commands
- From: "Priscilla Martinez" <priscilla.martinez@medisin.uio.no>
- st: Question on spmap and region aggregation
- From: "Vitorino, Maria Ana" <vitorino@wharton.upenn.edu>
- Re: st: problem when using shp2dta with dbf file
- From: kcrow@stata.com (Kevin H. Crow)
- RE: AW: st: RE: AW: Re:
- From: "Forshee, Richard" <Richard.Forshee@fda.hhs.gov>
- st: Can Stata underline?
- From: "Craig, Benjamin M." <Benjamin.Craig@moffitt.org>
- st: RE: dot plot with 2 levels of independent variable
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: dot plot with 2 levels of independent variable
- From: "Paul O'Brien" <paul.obrien@afe2.org.uk>
- Re: st: hbox line
- From: drreg@earthlink.net
- Re: st: hbox line
- From: vwiggins@stata.com (Vince Wiggins, StataCorp)
- RE: st: RE: AW: Problem with grqreg
- From: "Jeff" <jbw-appraiser@earthlink.net>
- st: AW: RE: AW: Problem with grqreg
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- AW: AW: st: RE: regression r(103): too many variables
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: instrumental variables, reg3, simultaneous equation model, var
- From: Michael McCulloch <mm@pinestreetfoundation.org>
- Re: st: instrumental variables, reg3, simultaneous equation model, var
- From: "Agrar Fagma" <agfa1970@gmx.de>
- Re: st: RE: AW: Problem with grqreg
- From: Michael McCulloch <mm@pinestreetfoundation.org>
- re: AW: st: RE: regression r(103): too many variables
- From: Kit Baum <Baum@bc.edu>
- st: RE: AW: Problem with grqreg
- From: "Jeff" <jbw-appraiser@earthlink.net>
- st: RE: Descriptives using multiple-imputed complex survey design data
- From: "Newson, Roger B" <r.newson@imperial.ac.uk>
- Re: st: AW: create a dataset or vector of variable names
- From: Eric Booth <ebooth@ppri.tamu.edu>
- AW: st: AW: create a dataset or vector of variable names
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: AW: create a dataset or vector of variable names
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: AW: create a dataset or vector of variable names
- From: Scott Merryman <scott.merryman@gmail.com>
- st: create a dataset or vector of variable names
- From: "Sheena Sullivan" <sheena.sullivan@gmail.com>
- AW: st: RE: regression r(103): too many variables
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- re: st: RE: Method for first stage, in xtivreg
- From: Kit Baum <baum@bc.edu>
- RE: st: RE: Descriptives using multiple-imputed complex survey design data
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- RE: st: RE: regression r(103): too many variables
- From: Paul Higgins <pahiggins@LRCA.com>
- st: re: AW: re: Method for first stage, in xtivreg
- From: Kit Baum <Baum@bc.edu>
- re: st: RE: regression r(103): too many variables
- From: Kit Baum <baum@bc.edu>
- st: instrumental variables, reg3, simultaneous equation model, var
- Re: st: Dot chart with line at 0
- From: Friedrich Huebler <fhuebler@gmail.com>
- Re: st: GAM in survey commands
- From: Stas Kolenikov <skolenik@gmail.com>
- Re: st: re:
- From: Hans Henrik Sievertsen <hhsievertsen@gmail.com>
- Re: st: RE: Method for first stage, in xtivreg
- From: Hans Henrik Sievertsen <hhsievertsen@gmail.com>
- st: AW: Macro dissapears after forval or foreach
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Macro dissapears after forval or foreach
- From: <Stefan.Gawrich@hlpug.hessen.de>
- Re: AW: st: RE: AW: Re:
- From: GORLE Steven <steven.gorle@telenet.be>
- Re: st: LSM smoothing
- From: Tirthankar Chakravarty <tirthankar.chakravarty@gmail.com>
- AW: AW: st: RE: AW: Re:
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: Re: AW: st: AW: AW: Re: !start
- From: Kit Baum <baum@bc.edu>
- st: LSM smoothing
- From: <IliaN@gertner.health.gov.il>
- Re: AW: st: RE: AW: Re:
- From: aschaich@smail.uni-koeln.de
- AW: st: RE: creating variables using 'by' for subsets of records
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: AW: Controling number of cores used by STATA MP
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: GAM in survey commands
- From: "Priscilla Martinez" <priscilla.martinez@medisin.uio.no>
- Re: st: RE: creating variables using 'by' for subsets of records
- From: John Westbury <jrwestbury@gmail.com>
- st: Controling number of cores used by STATA MP
- From: Shona Livingstone <s.livingstone@cpse.dundee.ac.uk>
- AW: st: Saving logfile in XML-format?
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Saving logfile in XML-format?
- From: Neil Shephard <nshephard@gmail.com>
- st: AW: re: Method for first stage, in xtivreg
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- AW: st: RE: regression r(103): too many variables
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- AW: st: RE: AW: Re:
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: RE: regression r(103): too many variables
- From: sjsamuels@gmail.com
- Re: st: RE: Descriptives using multiple-imputed complex survey design data
- From: Rosie Chen <jiarongchen2002@yahoo.com>
- Re: st: RE: regression r(103): too many variables
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: Dot chart with line at 0
- From: Michael Norman Mitchell <Michael.Norman.Mitchell@gmail.com>
- st: Dot chart with line at 0
- From: Friedrich Huebler <fhuebler@gmail.com>
- RE: st: RE: AW: Re:
- From: aschaich@smail.uni-koeln.de
- st: re: Method for first stage, in xtivreg
- From: Kit Baum <baum@bc.edu>
- Re: st: Calculate individual distance from other group members
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: question about interaction effects with biprobit
- From: Austin Nichols <austinnichols@gmail.com>
- st: re:
- From: Kit Baum <baum@bc.edu>
- st: RE: Method for first stage, in xtivreg
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Method for first stage, in xtivreg
- From: Hans Henrik Sievertsen <hhsievertsen@gmail.com>
- Re: st: Calculate individual distance from other group members
- From: Kartika Sari <kartika.sj@gmail.com>
- Re: st: question about interaction effects with biprobit
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- st: question about interaction effects with biprobit
- From: "Ed Levitas" <levitas@uwm.edu>
- RE: st: Calculate individual distance from other group members
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Calculate individual distance from other group members
- From: Kartika Sari <kartika.sj@gmail.com>
- st: RE: regression r(103): too many variables
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: regression r(103): too many variables
- From: Paul Higgins <pahiggins@LRCA.com>
- st: RE: creating variables using 'by' for subsets of records
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Listcoef option for logit
- From: jason mitchell <jasw.mitchell@gmail.com>
- st: RE: creating variables using 'by' for subsets of records
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: RE: Descriptives using multiple-imputed complex survey design data
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- Re: st: creating variables using 'by' for subsets of records
- From: Eric Booth <ebooth@ppri.tamu.edu>
- Re: st: interactions for xtmelogit models
- From: rgutierrez@stata.com (Roberto G. Gutierrez, StataCorp)
- Re: st: RE: Descriptives using multiple-imputed complex survey design data
- From: Stas Kolenikov <skolenik@gmail.com>
- Re: st: Mim, T values, and Probability of T values
- From: Stas Kolenikov <skolenik@gmail.com>
- st: creating variables using 'by' for subsets of records
- From: John Westbury <jrwestbury@gmail.com>
- st: RE: May not drop an endogenous regressor
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Mim, T values, and Probability of T values
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- st: How to use xshell to make Stata to open a terminal and type a command
- From: "Tiago V. Pereira" <tiago.pereira@incor.usp.br>
- st: May not drop an endogenous regressor
- From: "Mafalda Sampaio" <mafaldasampaio@fe.unl.pt>
- st: Mim, T values, and Probability of T values
- From: Eduard Bonet <bonedu@gmail.com>
- Re: st: RE: Descriptives using multiple-imputed complex survey design data
- From: Rosie Chen <jiarongchen2002@yahoo.com>
- RE: st: RE: AW: Re:
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Calculate individual distance from other group members
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: semiparametric mixture cure models
- From: "E. Paul Wileyto" <epw@mail.med.upenn.edu>
- Re: st: Scandinavian letters in Stata
- From: Eric Booth <ebooth@ppri.tamu.edu>
- Re: st: Scandinavian letters in Stata
- From: Eric Booth <ebooth@ppri.tamu.edu>
- Re: st: RE: AW: Re:
- From: aschaich@smail.uni-koeln.de
- Re: st: RE: AW: Re:
- From: aschaich@smail.uni-koeln.de
- Re: st: Scandinavian letters in Stata
- From: roland andersson <rolandersson@gmail.com>
- RE: st: RE: Descriptives using multiple-imputed complex survey design data
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- Re: st: semiparametric mixture cure models
- From: Sridhar Telidevara <sridhar.telidevara@gmail.com>
- Re: st: Scandinavian letters in Stata
- From: roland andersson <rolandersson@gmail.com>
- st: Calculate individual distance from other group members
- From: Kartika Sari <kartika.sj@gmail.com>
- st: SV: RE: save table output as a matrix?
- From: "Widerstedt Barbro" <Barbro.Widerstedt@tillvaxtanalys.se>
- Re: AW: st: AW: AW: Re:
- From: Nikos Askitas <askitas@iza.org>
- RE: st: RE:RE: AW: marginal effects after ssm command
- From: "Arantza Ugidos" <arantza.ugidos@ehu.es>
- Re: st: problem when using shp2dta with dbf file
- From: Scott Merryman <scott.merryman@gmail.com>
- st: RE: AW: help with paretofit
- From: philippe van kerm <philippe.vankerm@ceps.lu>
- Re: st: help with paretofit
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- Re: AW: st: AW: AW: Re:
- From: Ulrich Kohler <kohler@wzb.eu>
- AW: AW: st: AW: AW: Re:
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: AW: st: AW: AW: Re:
- From: Eric Booth <ebooth@ppri.tamu.edu>
- Re: AW: st: AW: AW: Re:
- From: Ulrich Kohler <kohler@wzb.eu>
- st: AW: help with paretofit
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- AW: st: AW: AW: Re:
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: lags with multiply imputed panel data
- From: Daniel Miller <danielpmiller@gmail.com>
- AW: st: Scandinavian letters in Stata
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: AW: AW: Re:
- From: aschaich@smail.uni-koeln.de
- Re: st: AW: AW: Re:
- From: Ulrich Kohler <kohler@wzb.eu>
- Re: st: Scandinavian letters in Stata
- From: Eric Booth <ebooth@ppri.tamu.edu>
- Re: st: semiparametric mixture cure models
- From: "E. Paul Wileyto" <epw@mail.med.upenn.edu>
- st: Scandinavian letters in Stata
- From: roland andersson <rolandersson@gmail.com>
- st: help with paretofit
- From: Jon Schwabish <jschwabi@yahoo.com>
- st: dgmmiv use when two period lags in xtdpd
- From: Hewan Belay <hewan_belay@yahoo.com>
- st: xtmixed and no of obs per group
- From: saurav pathak <sauravicbs@googlemail.com>
- Re: st: re: data row transformation for irregular consecutive days
- From: Kaspar Dardas <kaspar.dardas@googlemail.com>
- st: AW: AW: Re:
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: semiparametric mixture cure models
- From: "Sridhar Telidevara" <sridhar.telidevara@gmail.com>
- st: RE: AW: Re:
- From: "Abrams, Judith" <abramsj@karmanos.org>
- st: AW: Re:
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Re:
- From: Sungbok Lee <javanfish@tamu.edu>
- st: Spearman correlation in panel data
- From: Tim Kanters <kanters@bmg.eur.nl>
- st: Re:
- From: "Karen Wright" <Karen.Wright@icr.ac.uk>
- st: Saving logfile in XML-format?
- From: aschaich@smail.uni-koeln.de
- [no subject]
- From: aschaich@smail.uni-koeln.de
- Re: st: spatwmat "matrix not symmetric"
- From: Scott Merryman <scott.merryman@gmail.com>
- st: Display panel-specific coefficient in linear dynamic panel-data estimation
- From: "Larsen Thomas Andre" <thomas.a.larsen@uit.no>
- Re: st: stochastic frontier analysis efficiency scores
- From: Scott Merryman <scott.merryman@gmail.com>
- st: AW: save table output as a matrix?
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: save table output as a matrix?
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: save table output as a matrix?
- From: "Widerstedt Barbro" <Barbro.Widerstedt@tillvaxtanalys.se>
- Re: st: AW: Problem with grqreg
- From: Scott Merryman <scott.merryman@gmail.com>
- AW: st: AW: Problem with grqreg
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: AW: Problem with grqreg
- From: "Michael C. Morrison" <morrimic@niacc.edu>
- st: AW: Problem with grqreg
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: AW: Problem with grqreg
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Problem with grqreg
- From: "Michael C. Morrison" <Morrimic@niacc.edu>
- RE: st: re: data row transformation for irregular consecutive days
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: RE: Descriptives using multiple-imputed complex survey design data
- From: Rosie Chen <jiarongchen2002@yahoo.com>
- Re: st: RE: Descriptives using multiple-imputed complex survey design data
- From: Rosie Chen <jiarongchen2002@yahoo.com>
- Re: st: Re: Adding the marginal effects at individual values of
- From: "Solomon Tesfu" <ecosttx@langate.gsu.edu>
- st: problem when using shp2dta with dbf file
- From: "Vitorino, Maria Ana" <vitorino@wharton.upenn.edu>
- Re: st: Best machine to build for running STATA
- From: Stas Kolenikov <skolenik@gmail.com>
- Re: st: Best machine to build for running STATA
- From: Michael Norman Mitchell <Michael.Norman.Mitchell@gmail.com>
- Re: st: Re: Adding the marginal effects at individual values of
- From: Kit Baum <baum@bc.edu>
- Re: st: Re: Adding the marginal effects at individual values of
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- Re: st: Re: Adding the marginal effects at individual values of
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: Re: Adding the marginal effects at individual values of
- From: "Solomon Tesfu" <ecosttx@langate.gsu.edu>
- Re: st: Best machine to build for running STATA
- From: Dana Chandler <dchandler@gmail.com>
- Re: st: RE: Descriptives using multiple-imputed complex survey design data
- From: sjsamuels@gmail.com
- st: Estimation of consistent var-covariance matrix of probit estimates
- From: Fabio Zona <fabio.zona@unibocconi.it>
- Re: st: Best machine to build for running STATA
- From: Michael Norman Mitchell <Michael.Norman.Mitchell@gmail.com>
- Re: st: Reading large data sets in Stata
- From: Stas Kolenikov <skolenik@gmail.com>
- st: Best machine to build for running STATA
- From: Dana Chandler <dchandler@gmail.com>
- st: RE: Descriptives using multiple-imputed complex survey design data
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- st: Descriptives using multiple-imputed complex survey design data
- From: Rosie Chen <jiarongchen2002@yahoo.com>
- st: RE: suest with oprobit
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Reading large data sets in Stata
- From: Michael Norman Mitchell <Michael.Norman.Mitchell@gmail.com>
- RE: st: Reading large data sets in Stata
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: suest with oprobit
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: suest with oprobit
- From: Pazit Ben Nun <pazitbn@yahoo.com>
- re: st: re: data row transformation for irregular consecutive days
- From: Christopher Baum <baum@bc.edu>
- st: RE: RE: hbox line
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- re: st: Reading large data sets in Stata
- From: Christopher Baum <baum@bc.edu>
- Re: st: RE: hbox line
- From: Michael Norman Mitchell <Michael.Norman.Mitchell@gmail.com>
- st: RE: hbox line
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: hbox line
- From: drreg@earthlink.net
- Re: st: Re: Adding the marginal effects at individual values of
- From: Christopher Baum <baum@bc.edu>
- Re: st: Re: Adding the marginal effects at individual values of
- From: "Solomon Tesfu" <ecosttx@langate.gsu.edu>
- Re: st: re: data row transformation for irregular consecutive days
- From: Kaspar Dardas <kaspar.dardas@googlemail.com>
- st: RE: RE: RE: AW: interactions for xtmelogit models
- From: "Hardy, Dale S" <Dale.S.Hardy@uth.tmc.edu>
- st: RE: RE: AW: interactions for xtmelogit models
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: Reading large data sets in Stata
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Reading large data sets in Stata
- From: Frank Lopresti <frank.lopresti@nyu.edu>
- Re: st: Reading large data sets in Stata
- From: Stas Kolenikov <skolenik@gmail.com>
- Re: st: Stata scoops the Lancet
- From: Stas Kolenikov <skolenik@gmail.com>
- st: RE: AW: interactions for xtmelogit models
- From: "Hardy, Dale S" <Dale.S.Hardy@uth.tmc.edu>
- st: RE: re: data row transformation for irregular consecutive days
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: re: sample by() vs. bysort: sample; and some unexpected ssc install
- From: Gabi Huiber <ghuiber@gmail.com>
- st: re: data row transformation for irregular consecutive days
- From: Kit Baum <baum@bc.edu>
- st: RE: Reading large data sets in Stata
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: data row transformation for irregular consecutive days
- From: Kaspar Dardas <kaspar.dardas@googlemail.com>
- st: Reading large data sets in Stata
- From: Jibonayan Raychaudhuri <jibonayanrc@yahoo.com>
- st: Descriptives using multiple-imputed complex survey design data
- From: Rosie Chen <jiarongchen2002@yahoo.com>
- st: re: Solving the moving average in the error structure in a panel data fe
- From: Kit Baum <baum@bc.edu>
- Re: st: AW: Reshaping question
- From: Anders Gaarsdal Holst <anders@kanten.dk>
- Re: st: RE: Reshaping question
- From: Anders Gaarsdal Holst <anders@kanten.dk>
- st: Solving the moving average in the error structure in a panel data fe estimation.
- From: Carolina Lennon <carolina.lennon@gmail.com>
- Re: st: slassification tree
- From: Ronan Conroy <rconroy@rcsi.ie>
- st: Re: Adding the marginal effects at individual values of
- From: Kit Baum <baum@bc.edu>
- st: Consistent Variance - Covariance matrix of probit estimates
- From: Fabio Zona <fabio.zona@unibocconi.it>
- st: initial values not feasible -xtpmg
- From: Hope Kayiska Chavula <chavulah@yahoo.com>
- st: re: error message when using tmap and shp2dta
- From: "Vitorino, Maria Ana" <vitorino@wharton.upenn.edu>
- st: RE: error message when using tmap and shp2dta
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: error message when using tmap and shp2dta
- From: "Vitorino, Maria Ana" <vitorino@wharton.upenn.edu>
- st: Stata scoops the Lancet
- From: Ronan Conroy <rconroy@rcsi.ie>
- RE: st: how to summarize while accounting for duplicate values
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: How to replicate
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: RE: How to update a command to a newer version
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: how to summarize while accounting for duplicate values
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: slassification tree
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: aic bic adjusted R-squared with svy command
- From: Björn Bünger <13bjbu@wiwi.uni-muenster.de>
- Re: st: working with timestamps with milliseconds
- From: Michael Mitchell <Michael.Norman.Mitchell@gmail.com>
- Re: st: slassification tree
- From: Robert A Yaffee <bob.yaffee@nyu.edu>
- fixed effects [was: Re: st: Date: Sat, 20 Feb 2010 12:03:30 -0600]
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: working with timestamps with milliseconds
- From: David Souther <davidsoutheremail@gmail.com>
- st: Problem of Monotone Likelihood in Cox Regression
- From: Henry <jakanyada@gmail.com>
- Re: st: pk analysis suite: elementary questions about -pkequiv-, -pkcross-, and -pkshape-
- From: Michael McCulloch <mm@pinestreetfoundation.org>
- st: pkcross: crossover study simulation question
- From: Michael McCulloch <mm@pinestreetfoundation.org>
- Re: st: pk analysis suite: elementary questions about -pkequiv-, -pkcross-, and -pkshape-
- From: "Joseph Coveney" <jcoveney@bigplanet.com>
- Re: st: re: Adding the marginal effects at individual values of
- From: "Solomon Tesfu" <ecosttx@langate.gsu.edu>
- RE: st: How to replicate
- From: Hailemariam Teklewold <hamtekbel@hotmail.com>
- RE: st: Weak identification with a large number of endogenous variables
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- Re: st: Weak identification with a large number of endogenous variables
- From: Roger Harbord <rmharbord@googlemail.com>
- Re: st: re: Adding the marginal effects at individual values of
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- Re: st: re: Adding the marginal effects at individual values of
- From: Kit Baum <baum@bc.edu>
- st: slassification tree
- From: <IliaN@gertner.health.gov.il>
- RE: st: How to replicate
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: How to replicate
- From: Hailemariam Teklewold <hamtekbel@hotmail.com>
- st: Weak identification with a large number of endogenous variables
- From: "PETRESKI Marjan" <M.Petreski@staffs.ac.uk>
- st: Date: Sat, 20 Feb 2010 12:03:30 -0600
- From: Daniel Engster <Daniel.Engster@utsa.edu>
- Re: st: pk analysis suite: elementary questions about -pkequiv-, -pkcross-, and -pkshape-
- From: "Airey, David C" <david.airey@Vanderbilt.Edu>
- Re: st: RE: question about the anycount option of egen
- From: Ekaterina Hertog <ekaterina.hertog@sociology.ox.ac.uk>
- st: RE: working with timestamps with milliseconds
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: pk analysis suite: elementary questions about -pkequiv-, -pkcross-, and -pkshape-
- From: "Joseph Coveney" <jcoveney@bigplanet.com>
- Re: st: Pie chart problem
- From: Philip Burgess <philip.burgess.uq@gmail.com>
- Re: st: how to save the result of percentile using summarize
- From: Philipp Rehm <philipp.rehm@gmx.de>
- Re: st: how to indicate rho, sigma, and lambda in treatreg using estout
- From: Nobuya Fukugawa <nfukugawa@gmail.com>
- st: how to save the result of percentile using summarize
- From: Nobuya Fukugawa <nfukugawa@gmail.com>
- Re: st: re: Adding the marginal effects at individual values of
- From: "Solomon Tesfu" <ecosttx@langate.gsu.edu>
- Re: st: working with timestamps with milliseconds
- From: Michael Mitchell <Michael.Norman.Mitchell@gmail.com>
- st: re: Adding the marginal effects at individual values of
- From: Kit Baum <baum@bc.edu>
- st: working with timestamps with milliseconds
- From: David Souther <davidsoutheremail@gmail.com>
- Re: st: bar graph question
- From: Scott Merryman <scott.merryman@gmail.com>
- st: bar graph question
- From: Jeph Herrin <junk@spandrel.net>
- Re: st: Adding the marginal effects at individual values of a continous regressor to the data
- From: "Solomon Tesfu" <ecosttx@langate.gsu.edu>
- Re: st: Adding the marginal effects at individual values of a continous regressor to the data
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- st: question about the anycount option of egen
- From: Ekaterina Hertog <ekaterina.hertog@sociology.ox.ac.uk>
- st: RE: question about the anycount option of egen
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: pseudo log-likelihood report
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: pseudo log-likelihood report
- From: Ian Breunig <ianbreunig@gmail.com>
- st: RE: how to handle this type of strings: "text (i.e it containes only one ")
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Adding the marginal effects at individual values of a continous regressor to the data
- From: "Solomon Tesfu" <ecosttx@langate.gsu.edu>
- st: Correct modeling procedure for a population growth model that includes extinction?
- From: John Simpson <john.simpson@ualberta.ca>
- Re: st: how to handle this type of strings: "text (i.e it containes only one ")
- From: Eric Booth <ebooth@ppri.tamu.edu>
- st: how to handle this type of strings: "text (i.e it containes only one ")
- From: Adrian Gonzalez <agonzalezmix@yahoo.com>
- RE: st: how to summarize while accounting for duplicate values
- st: RE: How to remove cross-sections with high number of missing values in panel data analysis
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: how to summarize while accounting for duplicate values
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Why does streg allow both state fixed-effects and time invariant state variables?
- From: sjsamuels@gmail.com
- st: re: sample by() vs. bysort: sample; and some unexpected ssc install
- From: Kit Baum <baum@bc.edu>
- Re: st: How to remove cross-sections with high number of missing values in panel data analysis
- From: Eric Booth <ebooth@ppri.tamu.edu>
- Re: st: How to remove cross-sections with high number of missing values in panel data analysis
- From: Eric Booth <ebooth@ppri.tamu.edu>
- Re: st: pk analysis suite: elementary questions about -pkequiv-, -pkcross-, and -pkshape-
- From: Michael McCulloch <mm@pinestreetfoundation.org>
- st: How to remove cross-sections with high number of missing values in panel data analysis
- From: Prabhat <prabhat.barnwal@gmail.com>
- Re: st: pk analysis suite: elementary questions about -pkequiv-, -pkcross-, and -pkshape-
- From: "Joseph Coveney" <jcoveney@bigplanet.com>
- Re: st: how to summarize while accounting for duplicate values
- From: Jeph Herrin <junk@spandrel.net>
- st: pk analysis suite: elementary questions about -pkequiv-, -pkcross-, and -pkshape-
- From: Michael McCulloch <mm@pinestreetfoundation.org>
- st: sample by() vs. bysort: sample; and some unexpected ssc install trouble with a Mata library
- From: Gabi Huiber <ghuiber@gmail.com>
- Re: st: how to summarize while accounting for duplicate values
- From: Eric Booth <ebooth@ppri.tamu.edu>
- Re: st: Inequality of education: ineqdec0?
- From: bmilanovic@worldbank.org
- RE: st: AW: RE: RE: RE: RE: RE: where did my matrix go after calling -diagt-
- From: Paul Seed <paul.seed@kcl.ac.uk>
- st: RE: how to summarize while accounting for duplicate values
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: How to update a command to a newer version
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: how to summarize while accounting for duplicate values
- st: How to update a command to a newer version
- From: Xiaolan Yu <xiaolanyu81@gmail.com>
- Re: st: Why does streg allow both state fixed-effects and time invariant state variables?
- From: Stas Kolenikov <skolenik@gmail.com>
- RE: st: aic bic adjusted R-squared with svy command
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: aic bic adjusted R-squared with svy command
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- Re: st: Why does streg allow both state fixed-effects and time invariant state variables?
- From: David Jacobs <jacobs.184@sociology.osu.edu>
- Re: st: RE: Martin and Maarten
- From: Nick Winter <nwinter@virginia.edu>
- Re: st: aic bic adjusted R-squared with svy command
- From: Ronan Conroy <rconroy@rcsi.ie>
- Re: st: stptime person-time
- From: raoul reulen <r.c.reulen@gmail.com>
- st: stptime person-time
- From: Emilie Chary <emilie_chary@yahoo.fr>
- st: RE: Reshaping question
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: spatwmat "matrix not symmetric"
- From: Richard Palmer-Jones <rpjstatalist@googlemail.com>
- st: AW: Reshaping question
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Reshaping question
- From: Anders Gaarsdal Holst <anders@kanten.dk>
- st: Reshaping question
- From: Anders Gaarsdal Holst <anders@kanten.dk>
- AW: st: re: Inequality of education: ineqdec0?
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: re: Inequality of education: ineqdec0?
- From: "Francesco Burchi" <fburchi@uniroma3.it>
- st: Inequality of education: ineqdec0?
- From: "Stephen P. Jenkins" <stephenj@essex.ac.uk>
- Re: st: AW: How to avoid duplicate labels in a stacked bar graph?
- From: Dorothy Bridges <dbstata@gmail.com>
- st: AW: How to avoid duplicate labels in a stacked bar graph?
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: How to avoid duplicate labels in a stacked bar graph?
- From: Dorothy Bridges <dbstata@gmail.com>
- st: AW: drop observations after first occurence of an event
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: drop observations after first occurence of an event
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: AW: drop observations after first occurence of an event
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: drop observations after first occurence of an event
- From: raoul reulen <r.c.reulen@gmail.com>
- Re: st: Why does streg allow both state fixed-effects and time invariant state variables?
- From: Stas Kolenikov <skolenik@gmail.com>
- st: stochastic frontier analysis efficiency scores
- From: Arne.Bueschemann@wiwi.uni-paderborn.de
- st: asclogit collinear problem
- From: Firat Yaman <firat80@gmail.com>
- R: st: aic bic adjusted R-squared with svy command
- From: "Carlo Lazzaro" <carlo.lazzaro@tin.it>
- st: R: textbooks for introductory biostatistics with Stata
- From: "Carlo Lazzaro" <carlo.lazzaro@tin.it>
- Re: st: aic bic adjusted R-squared with svy command
- From: John Antonakis <john.antonakis@unil.ch>
- Re: Re: Re: st: update seqlogit
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: RE: AW: help with twoway bar chart using by option
- From: Miranda Kim <mk@mrc.soton.ac.uk>
- Re: st: Inequality of education: ineqdec0?
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: net awareness and security
- From: Neil Shephard <nshephard@gmail.com>
- Re: st: RE: "overlaying" Stacked bar charts
- From: Devra Golbe <dgolbe@gmail.com>
- st: Why does streg allow both state fixed-effects and time invariant state variables?
- From: Sepideh Modrek <smodrek@stanford.edu>
- st: net awareness and security
- From: "Airey, David C" <david.airey@Vanderbilt.Edu>
- st: textbooks for introductory biostatistics with Stata
- From: "Airey, David C" <david.airey@Vanderbilt.Edu>
- Re: st: Pie chart problem
- From: vwiggins@stata.com (Vince Wiggins, StataCorp)
- RE: st: AW: RE: RE: RE: RE: RE: where did my matrix go after calling -diagt-
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: AW: RE: RE: RE: RE: RE: where did my matrix go after calling -diagt-
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: AW: RE: RE: RE: RE: RE: where did my matrix go after calling -diagt-
- From: moleps <moleps2@gmail.com>
- Re: st: aic bic adjusted R-squared with svy command
- From: sjsamuels@gmail.com
- st: RE: thanks and a comment
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: Setting up time-varying variable data for Cox analysis
- From: Hsueh-Sheng Wu <wuh@bgsu.edu>
- st: thanks and a comment
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- st: RE: RE: RE: AW: recoding a variable
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- st: Which distribution to choose in AFT surivival model
- From: Yanling Wang <yanling_wang@carleton.ca>
- st: Inequality of education: ineqdec0?
- From: "Francesco Burchi" <fburchi@uniroma3.it>
- Re: Re: Re: st: update seqlogit
- From: angelrlaso@gmail.com
- st: RE: RE: AW: recoding a variable
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: AW: recoding a variable
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- st: RE: Martin and Maarten
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- Re: st: panel data with AFT models
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: panel data with AFT models
- From: Yanling Wang <yanling_wang@carleton.ca>
- RE: st: Martin and Maarten
- From: "Fiedler, James (JSC-SK)[USRA]" <james.fiedler-1@nasa.gov>
- st: Dynamic panel data with very short panels
- From: "Sebastian van Baal" <s.vanbaal@arcor.de>
- RE: st: RE: problem with xtcsd
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: Thread-Index: AcqwrkqsyVJMieBERUiHkK2aIfQufQ==
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: nonparametric regression with sampling weights
- From: Austin Nichols <austinnichols@gmail.com>
- st: RE: AW: help with twoway bar chart using by option
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: AW: RE: AW: help with twoway bar chart using by option
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: RE: problem with xtcsd
- From: amatoallah ouchen <at.ouchen@gmail.com>
- Re: st: nonparametric regression with sampling weights
- From: Stas Kolenikov <skolenik@gmail.com>
- st: Thread-Index: AcqwrkqsyVJMieBERUiHkK2aIfQufQ==
- From: Jia Li <jli@arec.umd.edu>
- st: use of vwls against heteroskedasticity
- From: "Marion Collewet" <collewet@ese.eur.nl>
- st: AW: help with twoway bar chart using by option
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Martin and Maarten
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: help with twoway bar chart using by option
- From: Miranda Kim <mk@mrc.soton.ac.uk>
- Re: st: Martin and Maarten
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- Re: st: Martin and Maarten
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- AW: st: Martin and Maarten
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Martin and Maarten
- From: Stas Kolenikov <skolenik@gmail.com>
- Re: st: line on top of bar graph
- From: Jeph Herrin <jeph.herrin@yale.edu>
- st: -stripplot- updated on SSC
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- AW: st: line on top of bar graph
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: line on top of bar graph
- From: Scott Merryman <scott.merryman@gmail.com>
- st: AW: RE: RE: RE: RE: RE: where did my matrix go after calling -diagt-
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: RE: RE: RE: RE: where did my matrix go after calling -diagt-
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: nonparametric regression with sampling weights
- From: "Newson, Roger B" <r.newson@imperial.ac.uk>
- st: AW: Martin and Maarten
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Martin and Maarten
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: Pie chart problem
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: AW: RE: AW: AW: recoding a variable
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: AW: RE: AW: AW: recoding a variable
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: AW: line on top of bar graph
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: AW: AW: recoding a variable
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: line on top of bar graph
- From: Jeph Herrin <junk@spandrel.net>
- st: AW: RE: FEM and GLS
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: AW: AW: recoding a variable
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: RE: test for rho=0 in Heckman two-step procedure?
- From: Michael Boehm <michael.boehm1@gmail.com>
- st: RE: FEM and GLS
- From: simon nyokabi <simongithuku2007@yahoo.com>
- st: AW: recoding a variable
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- [no subject]
- st: st: AW: using desmat svy reg with dependent variable _x_1 ?
- From: Björn Bünger <13bjbu@wiwi.uni-muenster.de>
- Re: st: Stata programming question
- From: "E. Paul Wileyto" <epwileyto@verizon.net>
- st: macro data 4 stata
- From: Scott Merryman <scott.merryman@gmail.com>
- st: recoding a variable
- From: "Data Analytics Corp." <walt@dataanalyticscorp.com>
- Re: st: Pie chart problem
- From: Philip Burgess <philip.burgess.uq@gmail.com>
- AW: st: Pie chart problem
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Pie chart problem
- From: Philip Burgess <philip.burgess.uq@gmail.com>
- AW: st: Pie chart problem
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Pie chart problem
- From: Philip Burgess <philip.burgess.uq@gmail.com>
- AW: st: RE: test for rho=0 in Heckman two-step procedure?
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: aic bic adjusted R-squared with svy command
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: Pie chart problem
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: Pie chart problem
- From: Philip Burgess <philip.burgess.uq@gmail.com>
- st: aic bic adjusted R-squared with svy command
- From: Björn Bünger <13bjbu@wiwi.uni-muenster.de>
- RE: st: RE: How do I execute the "intreg" command succcessfully?
- From: "Alam, Sartaj" <Sartaj.Alam@uth.tmc.edu>
- Re: st: RE: test for rho=0 in Heckman two-step procedure?
- From: Tirthankar Chakravarty <tirthankar.chakravarty@gmail.com>
- Re: st: RE: test for rho=0 in Heckman two-step procedure?
- From: Michael Boehm <michael.boehm1@gmail.com>
- Re: st: RE: How do I execute the "intreg" command succcessfully?
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- Re: st: How do I execute the "intreg" command succcessfully?
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- Re: st: How do I execute the "intreg" command succcessfully?
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- st: RE: Stata programming question
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- st: RE: How do I execute the "intreg" command succcessfully?
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: How do I execute the "intreg" command succcessfully?
- From: Martin Ryan <martin.f.ryan@gmail.com>
- Re: st: Stata programming question
- From: Abdel Rahmen El Lahga <rahmen.lahga@gmail.com>
- st: RE: Stata programming question
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Stata programming question
- From: "Data Analytics Corp." <walt@dataanalyticscorp.com>
- RE: st: re: How to correct standard errors of a 2sls performed by
- From: Anne-Sophie Bergerès <macadamianesofie@hotmail.com>
- Re: st: RE: RE: RE: Estout question
- From: Jeff Schiman <jeff.schiman@gmail.com>
- st: nonparametric regression with sampling weights
- From: Andaleeb Alam <andaleebjalam@gmail.com>
- st: RE: RE: RE: Estout question
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: RE: Estout question
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: interpreting -test, accumulate- output
- From: Tom Moliterno <moliterno@moore.sc.edu>
- st: RE: RE: RE: RE: where did my matrix go after calling -diagt-
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: RE: RE: where did my matrix go after calling -diagt-
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: RE: where did my matrix go after calling -diagt-
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: RE: where did my matrix go after calling -diagt-
- From: "Alam, Sartaj" <Sartaj.Alam@uth.tmc.edu>
- st: RE: test for rho=0 in Heckman two-step procedure?
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: where did my matrix go after calling -diagt-
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: where did my matrix go after calling -diagt-
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: Estout question
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: test for rho=0 in Heckman two-step procedure?
- From: Michael Boehm <michael.boehm1@gmail.com>
- st: Estout question
- From: Jeff Schiman <jeff.schiman@gmail.com>
- RE: st: quick question
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- st: where did my matrix go after calling -diagt-
- From: moleps <moleps2@gmail.com>
- st: RE: RE: problem with xtcsd
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: RE: problem with xtcsd
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: problem with xtcsd
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: RE: problem with xtcsd
- From: amatoallah ouchen <at.ouchen@gmail.com>
- st: RE: "overlaying" Stacked bar charts
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: biprobit/mvprobit and unobserved heterogeneity
- From: Dimitrije Tišma <dimitrijetisma@gmail.com>
- st: RE: problem with xtcsd
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: problem with xtcsd
- From: amatoallah ouchen <at.ouchen@gmail.com>
- st: "overlaying" Stacked bar charts
- From: Devra Golbe <dgolbe@gmail.com>
- Re: st: Supertitle/Column equation labels in -xml_tab-
- From: Marshall Garland <marshall.w.garland@gmail.com>
- RE: st: quick question
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: quick question
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: RE: quick question
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- RE: st: quick question
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- Re: st: update seqlogit
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: Moment evaluator programs with K equations
- From: odongo kodongo <odongo.kodongo@gmail.com>
- Re: st: Moment evaluator programs with K equations
- From: odongo kodongo <odongo.kodongo@gmail.com>
- RE: st: GLLAMM
- From: "arosella" <arosella@irccsdebellis.it>
- Re: st: Moment evaluator programs with K equations
- From: "Brian P. Poi" <bpoi@stata.com>
- Re: st: Moment evaluator programs with K equations
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: Moment evaluator programs with K equations
- From: Austin Nichols <austinnichols@gmail.com>
- st: Thanks for the bug fix in the new Stata update
- From: "Newson, Roger B" <r.newson@imperial.ac.uk>
- st: Moment evaluator programs with K equations
- From: Christopher Kodongo <Christopher.Kodongo@students.wits.ac.za>
- Re: st: width between ticks in a graph's axis
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: About the Heckman selection model
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: AW: using desmat svy reg with dependent variable _x_1 ?
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: width between ticks in a graph's axis
- From: "Vitorino, Maria Ana" <vitorino@wharton.upenn.edu>
- st: using desmat svy reg with dependent variable _x_1 ?
- From: Björn Bünger <13bjbu@wiwi.uni-muenster.de>
- st: About the Heckman selection model
- From: Maria Quattri <Maria.Quattri@manchester.ac.uk>
- st: RE: quick question
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: RE: re: creating a variable from many variables
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: RE: re: creating a variable from many variables
- From: Rajaram Subramanian Potty <rajara999@gmail.com>
- Re: st: How to stack two correlation matrix tables into one big correlation matrix (lower and upper diagonal) table?
- From: Kelvin Tan <kelvin.tan.statalist@gmail.com>
- Re: st: clogit prediction in the presence of collinearity
- From: sjsamuels@gmail.com
- Re: st: quick question
- From: Eric Booth <ebooth@ppri.tamu.edu>
- Re: st: quick question
- From: Eric Booth <ebooth@ppri.tamu.edu>
- st: RE: quick question
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: quick question
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: quick question
- From: Eric Booth <ebooth@ppri.tamu.edu>
- Re: st: quick question
- From: Austin Nichols <austinnichols@gmail.com>
- st: RE: quick question
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: quick question
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- Re: st: clogit prediction in the presence of collinearity
- From: sjsamuels@gmail.com
- RE: st: RE: a job opportunity in firm that uses Stata
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- Re: st: RE: a job opportunity in firm that uses Stata
- From: Marcello Pagano <pagano@hsph.harvard.edu>
- st: RE: RE: a job opportunity in firm that uses Stata
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: a job opportunity in firm that uses Stata
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- Re: st: GLLAMM
- From: Stas Kolenikov <skolenik@gmail.com>
- st: a job opportunity in firm that uses Stata
- From: "Tuomo Vuolteenaho" <tvuolteenaho@ArrowstreetCapital.com>
- RE: st: RE: bandwidth from gwarpreg and its use in lowess
- From: "Lazarte Alcala, Naneida" <naneida@okstate.edu>
- Re: st: Invalid Lags message - gmm, a system of two simultaneous equations
- From: "ari.dothan" <ari.dothan@gmail.com>
- st: RE: GLLAMM
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: GLLAMM
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: AW: Using GMM with Moment-Evaluator Program
- From: odongo kodongo <odongo.kodongo@gmail.com>
- st: GLLAMM
- From: "arosella" <arosella@irccsdebellis.it>
- Re: st: Reconcile Log Transformed with Untransformed Results
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: Invalid Lags message - gmm, a system of two simultaneous equations
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: Using GMM with Moment-Evaluator Program
- From: Christopher Kodongo <Christopher.Kodongo@students.wits.ac.za>
- Re: st: Using GMM with Moment-Evaluator Program
- From: "Brian P. Poi" <bpoi@stata.com>
- Re: st: Using GMM with Moment-Evaluator Program
- From: Stas Kolenikov <skolenik@gmail.com>
- Re: st: RE: RE: Using GMM with Moment-Evaluator Program
- From: Christopher Kodongo <Christopher.Kodongo@students.wits.ac.za>
- Re: st: Combining multiple survey data sets
- From: Stas Kolenikov <skolenik@gmail.com>
- st: RE: AW:AW: an egen command
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- st: RE: RE: Using GMM with Moment-Evaluator Program
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: AW: Using GMM with Moment-Evaluator Program
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: Using GMM with Moment-Evaluator Program
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: Using GMM with Moment-Evaluator Program
- From: odongo kodongo <odongo.kodongo@gmail.com>
- st: Canned Bivariate Model
- From: Alex Rutt <amr59@cam.ac.uk>
- Re: st: Reconcile Log Transformed with Untransformed Results
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: R: RR for mortality data set??
- From: "Carlo Lazzaro" <carlo.lazzaro@tin.it>
- Re: st: Reconcile Log Transformed with Untransformed Results
- From: Erasmo Giambona <e.giambona@gmail.com>
- Re: st: Combining multiple survey data sets
- From: Ángel Rodríguez Laso <angelrlaso@gmail.com>
- st: re: how do I know whether the user written ado is properly installed [SEC=UNCLASSIFIED]
- From: Kit Baum <baum@bc.edu>
- st: AW: how do I know whether the user written ado is properly installed [SEC=UNCLASSIFIED]
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Invalid Lags message - gmm, a system of two simultaneous equations
- From: "ari.dothan" <ari.dothan@gmail.com>
- st: an Egen command
- From: Jet <lsj555@gmail.com>
- st: Thread-Index: Acqu6FI/4vC1ZA1/QEu8g0dmgKkQfA==
- From: Ayfer Topcu <ayfetopc@rm.dk>
- st: how do I know whether the user written ado is properly installed [SEC=UNCLASSIFIED]
- From: "Adhikari, Pramod" <pramod.adhikari@aihw.gov.au>
- Re: st: Number of characters in a variable label
- From: Alan Neustadtl <alan.neustadtl@gmail.com>
- st: AW: AW:AW: an egen command
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: AW:AW: an egen command
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: AW: an egen command
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: an egen command
- From: Michael Norman Mitchell <Michael.Norman.Mitchell@gmail.com>
- Re: st: an egen command
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: RR for mortality data set??
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: an egen command
- From: Jet <lsj555@gmail.com>
- Re: Error message: estimates post: matrix has missing values
- From: Robert L Ostergard <orobert@unr.edu>
- RE: st: Supertitle/Column equation labels in -xml_tab-
- From: Zurab Sajaia <zsajaia@hotmail.com>
- st: RR for mortality data set??
- From: Alison McCarthy <statslearner@live.com>
- Re: Error message: estimates post: matrix has missing values
- From: Stas Kolenikov <skolenik@gmail.com>
- Error message: estimates post: matrix has missing values
- From: Robert L Ostergard <orobert@unr.edu>
- st: clogit prediction in the presence of collinearity
- From: Laura Zoratto <laura.zoratto@graduateinstitute.ch>
- Re: st: Invalid Lags message - gmm, a system of two simultaneous equations
- From: "Brian P. Poi" <bpoi@stata.com>
- Re: st: Invalid Lags message - gmm, a system of two simultaneous equations
- From: "ari.dothan" <ari.dothan@gmail.com>
- RE: st: xtmelogit - a very strange treatment of different levels
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: xtmelogit - a very strange treatment of different levels
- From: "Cohen, Elan" <cohened@upmc.edu>
- Re: st: RE: Add
- From: Tiago Fonseca <tiago.p.fonseca@gmail.com>
- Re: st: Add
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: RE: Re: Constructing a group level variable
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Add
- From: Tiago Fonseca <tiago.p.fonseca@gmail.com>
- st: RE: Add
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: RE: bandwidth from gwarpreg and its use in lowess
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: Re: Constructing a group level variable
- st: RE: bandwidth from gwarpreg and its use in lowess
- From: "Lazarte Alcala, Naneida" <naneida@okstate.edu>
- st: How to estimate a model with exponential covariance structure, reproducing a code from SAS
- From: Amado David Quezada Sanchez <amado.quezada@correo.insp.mx>
- RE: st: Converting date strings into dates
- From: DE SOUZA Eric <eric.de_souza@coleurope.eu>
- Re: st: Number of characters in a variable label
- From: Alan Neustadtl <alan.neustadtl@gmail.com>
- RE: st: Number of characters in a variable label
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: Converting date strings into dates
- From: wgould@stata.com (William Gould, StataCorp LP)
- st: RE: bandwidth from l2cvwarp and its use in lowess
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: AW: RE: AW: Converting date strings into dates
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: Number of characters in a variable label
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: RE: AW: Converting date strings into dates
- From: DE SOUZA Eric <eric.de_souza@coleurope.eu>
- AW: st: Number of characters in a variable label
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Stata always breaks down when we use -nnmatch-
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: Number of characters in a variable label
- From: Mosi Ifatunji <ifatunji@gmail.com>
- st: AW: Converting date strings into dates
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: Number of characters in a variable label
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: bandwidth from l2cvwarp and its use in lowess
- From: "Lazarte Alcala, Naneida" <naneida@okstate.edu>
- st: Converting date strings into dates
- From: DE SOUZA Eric <eric.de_souza@coleurope.eu>
- Re: st: AW: copy each observation in multiple rows
- From: Shehzad Ali <drshehzad_ali@yahoo.com>
- Re: st: Invalid Lags message - gmm, a system of two simultaneous equations
- From: "Brian P. Poi" <bpoi@stata.com>
- st: Systems of Equation with Nbreg
- From: Ashlie Delshad <abelmore@purdue.edu>
- st: Stata always breaks down when we use -nnmatch-
- From: Stata Chris <statachris@gmail.com>
- Re: st: copy each observation in multiple rows
- From: Eric Booth <ebooth@ppri.tamu.edu>
- st: copy each observation in multiple rows
- From: Shehzad Ali <drshehzad_ali@yahoo.com>
- st: AW: copy each observation in multiple rows
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: RE:RE: AW: marginal effects after ssm command
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: AW: Stata package / Latex
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Invalid Lags message - gmm, a system of two simultaneous equations
- From: Ari Dothan <ari.dothan@gmail.com>
- st: interpreting the dsginideco
- From: may gadallah <mayabaza@hotmail.com>
- st: Stata package / Latex
- st: AW: Stata package / Latex
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Re: Help on DIGDIS Syntax
- From: Scott Graham <sdjgraham@gmail.com>
- st: RE:RE: AW: marginal effects after ssm command
- From: "Arantza Ugidos" <arantza.ugidos@ehu.es>
- st: interpreting the dsginideco
- From: may gadallah <mayabaza@hotmail.com>
- RE: st: Random effect Kappa?
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: How to stack two correlation matrix tables into one big correlation matrix (lower and upper diagonal) table?
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: Reconcile Log Transformed with Untransformed Results
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: Combining multiple survey data sets
- From: James Swartz <jaswartz@uic.edu>
- Re: st: Number of characters in a variable label
- From: Eric Booth <ebooth@ppri.tamu.edu>
- st: AW: Number of characters in a variable label
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Number of characters in a variable label
- From: Mosi Ifatunji <ifatunji@gmail.com>
- st: re: passing a scalar argument to an ML evaluator
- From: Kit Baum <baum@bc.edu>
- st: passing a scalar argument to an ML evaluator
- From: László Sándor <sandorl@gmail.com>
- st: Simple question to xtivreg
- From: Hans Henrik Sievertsen <hhsievertsen@gmail.com>
- st: re: Questions on how to make a table to report marginal effects for
- From: Kit Baum <baum@bc.edu>
- Re: st: RE: Heckman two-step estimator
- From: Sridhar Telidevara <sridhar.telidevara@gmail.com>
- st: Questions on how to make a table to report marginal effects for mlogit model with squared term and dummies
- From: Kevin <kevinmeng@gmail.com>
- st: AW: Help on DIGDIS Syntax
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: heckprob dropping observations
- From: Eric Lawrence <eric.d.lawrence@gmail.com>
- st: Estimating fitted values which include a BLUP after mixed (XT) model
- From: Tom Wood <tomwood@uchicago.edu>
- st: Help on DIGDIS Syntax
- From: Scott Graham <sdjgraham@gmail.com>
- Re: st: RE: Heckman two-step estimator
- From: Sridhar Telidevara <sridhar.telidevara@gmail.com>
- Re: st: RE: Heckman two-step estimator
- From: Sridhar Telidevara <sridhar.telidevara@gmail.com>
- AW: st: RE: Heckman two-step estimator
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- AW: st: RE: Heckman two-step estimator
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: RE: Heckman two-step estimator
- From: Sridhar Telidevara <sridhar.telidevara@gmail.com>
- Re: st: Reconcile Log Transformed with Untransformed Results
- From: Erasmo Giambona <e.giambona@gmail.com>
- Re: st: Reconcile Log Transformed with Untransformed Results
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- RE: st: Questions on marginal effects for the model including squared term
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: RE: Heckman two-step estimator
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: RE: Economic Intuition of IV estimates
- From: "Vincent, David" <david.vincent@hp.com>
- st: Heckman two-step estimator
- From: Sridhar Telidevara <sridhar.telidevara@gmail.com>
- st: Questions on marginal effects for the model including squared term
- From: Xi Pan <mpanxi@gmail.com>
- Fwd: st: Random effect Kappa?
- From: Eduardo Nunez <enunezb@gmail.com>
- st: RE: heckprob dropping observations
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Reconcile Log Transformed with Untransformed Results
- From: Erasmo Giambona <e.giambona@gmail.com>
- st: RE: How to treat a variable that switches from being endogenous to exogenous in a dynamic panel data model
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: RE: simultaneous equation model for panel data
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- Re: st: GLLAMM
- From: "arosella" <arosella@irccsdebellis.it>
- st: heckprob dropping observations
- From: "Carlena Ficano" <FicanoC@hartwick.edu>
- Re: st: xtmelogit - a very strange treatment of different levels
- From: Stas Kolenikov <skolenik@gmail.com>
- Re: st: Reconcile Log Transformed with Untransformed Results
- From: Austin Nichols <austinnichols@gmail.com>
- st: Reconcile Log Transformed with Untransformed Results
- From: Erasmo Giambona <e.giambona@gmail.com>
- st: xtmixed: How replicate a SAS example in Stata11
- From: Amado David Quezada Sanchez <amado.quezada@correo.insp.mx>
- Re: st: RE: ivreg versus xtivreg
- From: John Antonakis <john.antonakis@unil.ch>
- RE: st: RE: ivreg versus xtivreg
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- Re: st: xtmelogit - a very strange treatment of different levels
- From: Dimitrije Tišma <dimitrijetisma@gmail.com>
- Re: st: RE: ivreg versus xtivreg
- From: John Antonakis <john.antonakis@unil.ch>
- Re: st: GLLAMM
- From: Stas Kolenikov <skolenik@gmail.com>
- st: kappa and specific agreement for unbalanced sample
- From: Ann Montgomery <ann.montgomery@me.com>
- re: st: xtmelogit - a very strange treatment of different levels
- From: "Airey, David C" <david.airey@Vanderbilt.Edu>
- st: update fmlogit available on ssc
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- RE: st: RE: ivreg versus xtivreg
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: GLLAMM
- From: "arosella" <arosella@irccsdebellis.it>
- Re: st: -outreg2- for nonlinear regressions? and -esttab-
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: Open a do-file, but not run it
- From: Michael McCulloch <mm@pinestreetfoundation.org>
- Re: st: RE: ivreg versus xtivreg
- From: John Antonakis <john.antonakis@unil.ch>
- AW: AW: st: -outreg2- for nonlinear regressions? and -esttab-
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: AW: st: -outreg2- for nonlinear regressions? and -esttab-
- From: Cindy Gao <cindy.gao@ymail.com>
- Re: st: -outreg2- for nonlinear regressions? and -esttab-
- From: Cindy Gao <cindy.gao@ymail.com>
- AW: st: -outreg2- for nonlinear regressions? and -esttab-
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: exporting regression coefficient
- From: "Newson, Roger B" <r.newson@imperial.ac.uk>
- st: RE: exporting regression coefficient
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: AW: exporting regression coefficient
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: RE: ivreg versus xtivreg
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: exporting regression coefficient
- From: David Mccartney <david.mccartney@seh.ox.ac.uk>
- RE: st: Scalling scatter plots together with by-option
- From: "Jonathan Schulz" <Jonathan.Schulz@econ.ku.dk>
- Re: st: Open a do-file, but not run it
- From: Alexandra Griffiths <aegriffiths@googlemail.com>
- Re: st: RE: Economic Intuition of IV estimates
- From: Antoine Terracol <Antoine.Terracol@univ-paris1.fr>
- Re: st: RE: Economic Intuition of IV estimates
- From: Erasmo Giambona <e.giambona@gmail.com>
- Re: st: RE: ivreg versus xtivreg
- From: John Antonakis <john.antonakis@unil.ch>
- RE: st: RE: ivreg versus xtivreg
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: xtmelogit - a very strange treatment of different levels
- From: Dimitrije Tišma <dimitrijetisma@gmail.com>
- st: RE: Economic Intuition of IV estimates
- From: "Vincent, David" <david.vincent@hp.com>
- st: Economic Intuition of IV estimates
- From: Erasmo Giambona <e.giambona@gmail.com>
- Re: st: RE: ivreg versus xtivreg
- From: John Antonakis <john.antonakis@unil.ch>
- RE: st: RE: ivreg versus xtivreg
- From: sara borelli <saraborelli77@yahoo.it>
- st: AW: AW: table no obs and missings
- From: "Kaulisch, Marc" <kaulisch@forschungsinfo.de>
- RE: st: RE: ivreg versus xtivreg
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- Re: st: Randomly draw from clustered sample
- From: Michael Norman Mitchell <Michael.Norman.Mitchell@gmail.com>
- st: AW: table no obs and missings
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: table no obs and missings
- From: "Kaulisch, Marc" <kaulisch@forschungsinfo.de>
- st: oglm hetero
- From: "fabrizio_ferriani@libero.it" <fabrizio_ferriani@libero.it>
- st: Randomly draw from clustered sample
- From: "Susan Olivia" <olivia@primal.ucdavis.edu>
- Re: st: -outreg2- for nonlinear regressions?
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- R: st: RE: ivreg versus xtivreg
- From: sara borelli <saraborelli77@yahoo.it>
- st: Open a do-file, but not run it
- From: "Tomas Lind" <tomas.lind@ki.se>
- st: -outreg2- for nonlinear regressions?
- From: Cindy Gao <cindy.gao@ymail.com>
- Re: sts test: displaying log-rank test of equality within a Kaplan Meier graph
- From: Michael McCulloch <mm@pinestreetfoundation.org>
- Re: sts test: displaying log-rank test of equality within a Kaplan Meier graph
- From: Michael McCulloch <mm@pinestreetfoundation.org>
- Re: sts test: displaying log-rank test of equality within a Kaplan Meier graph
- From: Michael Norman Mitchell <Michael.Norman.Mitchell@gmail.com>
- RE: sts test: displaying log-rank test of equality within a Kaplan Meier graph
- From: "Philip Ryan" <philip.ryan@adelaide.edu.au>
- Re: sts test: displaying log-rank test of equality within a Kaplan Meier graph
- From: Michael McCulloch <mm@pinestreetfoundation.org>
- RE: sts test: displaying log-rank test of equality within a Kaplan Meier graph
- From: "Philip Ryan" <philip.ryan@adelaide.edu.au>
- RE: sts test: displaying log-rank test of equality within a Kaplan Meier graph
- From: "Philip Ryan" <philip.ryan@adelaide.edu.au>
- sts test: displaying log-rank test of equality within a Kaplan Meier graph
- From: Michael McCulloch <mm@pinestreetfoundation.org>
- Re: st: Toolbar
- From: "Mark L. Diana" <mdiana@tulane.edu>
- st: nnmatch: Use only some observables for matching, and the others as regression controls?
- From: "Sergio I Prada" <sprada1@umbc.edu>
- st: gllamm - too few variables specified
- From: "Hillel Alpert" <HALPERT@hsph.harvard.edu>
- Re: st: AW: fit statistics for svy: mlogit
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: AW: fit statistics for svy: mlogit
- From: Kate Perper <kate.perper@gmail.com>
- Re: st: AW: how to delete the colons in the time
- From: "G. Dai" <dgecon@gmail.com>
- Re: st: Toolbar
- From: "Klink, Andrew" <KLINKA@email.chop.edu>
- RE: st: RE: RE: Slow Stata
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: Rounding
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Rounding
- From: "Luciana Zilberman" <lzilberman@salud.unm.edu>
- Re: st: RE: RE: Slow Stata
- From: Scott Baldwin <baldwinlist@gmail.com>
- Re: st: ivreg2, cluster vs. state fixed effects
- From: Duha Altindag <daltin2@tigers.lsu.edu>
- st: RE: ivreg versus xtivreg
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: ivreg versus xtivreg
- From: sara borelli <saraborelli77@yahoo.it>
- Re: st: Toolbar
- From: Eric Booth <ebooth@ppri.tamu.edu>
- RE: st: RE: RE: graph title formatting
- From: "Klink, Andrew" <KLINKA@email.chop.edu>
- st: Supertitle/Column equation labels in -xml_tab-
- From: Marshall Garland <marshall.w.garland@gmail.com>
- Re: st: RE: RE: graph title formatting
- From: Michael Norman Mitchell <Michael.Norman.Mitchell@gmail.com>
- st: RE: RE: graph title formatting
- From: "Klink, Andrew" <KLINKA@email.chop.edu>
- st: RE: graph title formatting
- From: "Fiedler, James (JSC-SK)[USRA]" <james.fiedler-1@nasa.gov>
- st: graph title formatting
- From: "Klink, Andrew" <KLINKA@email.chop.edu>
- Re: st: Rounding
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: RE: re: ivreg2, cluster vs. state fixed effects
- From: Nirina F <fstata@gmail.com>
- st: Rounding
- From: "Luciana Zilberman" <lzilberman@salud.unm.edu>
- Re: st: BCa bootstrap CIs: must I jackknife the entire sample?
- From: Roger Harbord <rmharbord@googlemail.com>
- st: RE: re: ivreg2, cluster vs. state fixed effects
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: Toolbar
- From: "Klink, Andrew" <KLINKA@email.chop.edu>
- Re: st: fit statistics for svy: mlogit
- From: Stas Kolenikov <skolenik@gmail.com>
- AW: st: All entries saved as integers
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: All entries saved as integers
- From: Jeph Herrin <junk@spandrel.net>
- st: AW: fit statistics for svy: mlogit
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: fit statistics for svy: mlogit
- From: Kate Perper <kate.perper@gmail.com>
- RE: st: Collapse with sum function and missing values
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: A command for a simultaneous model with an ordinal dependent variable?
- From: Eric Chiou <chiouyihung@gmail.com>
- AW: st: AW: All entries saved as integers
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: AW: All entries saved as integers
- From: Hans Henrik Sievertsen <hhsievertsen@gmail.com>
- Re: st: about the temporal desagragation
- From: amatoallah ouchen <at.ouchen@gmail.com>
- st: re: ivreg2, cluster vs. state fixed effects
- From: Kit Baum <baum@bc.edu>
- st: AW: how to delete the colons in the time
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: AW: All entries saved as integers
- From: Hans Henrik Sievertsen <hhsievertsen@gmail.com>
- AW: st: AW: All entries saved as integers
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: VAR IRF
- From: andrea carrozzone <andrea.carrozzone@gmail.com>
- st: AW: how to delete the colons in the time
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: how to delete the colons in the time
- From: "G. Dai" <dgecon@gmail.com>
- Re: st: A command for a simultaneous model with an ordinal dependent variable?
- From: Austin Nichols <austinnichols@gmail.com>
- st: ivreg2, cluster vs. state fixed effects
- From: Nirina F <fstata@gmail.com>
- AW: st: Collapse with sum function and missing values
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: Collapse with sum function and missing values
- From: Kit Baum <baum@bc.edu>
- st: VAR IRF
- From: "andrea carrozzone" <a.carrozzone@libero.it>
- Re: st: How to plot a mkspline regression?
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: RE: How to plot a mkspline regression?
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: How to plot a mkspline regression?
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: AW: All entries saved as integers
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: RE: AW: dealing with duplicate "pairs" of columns
- From: "Vitorino, Maria Ana" <vitorino@wharton.upenn.edu>
- Re: st: AW: dealing with duplicate "pairs" of columns
- From: "Vitorino, Maria Ana" <vitorino@wharton.upenn.edu>
- Re: st: A command for a simultaneous model with an ordinal dependent variable?
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: RE: How to plot a mkspline regression?
- From: "Kieran McCaul" <Kieran.McCaul@uwa.edu.au>
- st: How to plot a mkspline regression?
- From: Christian Weiss <mail@cweiss.org>
- st: R: Setting up time-varying variable data for Cox analysis
- From: "Carlo Lazzaro" <carlo.lazzaro@tin.it>
- Re: st: outreg2 and incorrect asterisks?
- From: Cassie Hartzog <chartzog-06@pacbell.net>
- st: RE: RE: Slow Stata
- From: "Kieran McCaul" <Kieran.McCaul@uwa.edu.au>
- re: re: st: Correction for overlapping return series
- From: Malcolm Wardlaw <malcolm@mail.utexas.edu>
- st: RE: Slow Stata
- From: "Kieran McCaul" <Kieran.McCaul@uwa.edu.au>
- re: st: Correction for overlapping return series
- From: Kit Baum <baum@bc.edu>
- st: Correction for overlapping return series
- From: Malcolm Wardlaw <malcolm@mail.utexas.edu>
- st: RE: RE: All entries saved as integers
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- st: sixplot fix
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- st: RE: All entries saved as integers
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: A command for a simultaneous model with an ordinal dependent variable?
- From: Eric Chiou <chiouyihung@gmail.com>
- st: All entries saved as integers
- From: Hans Henrik Sievertsen <hhsievertsen@gmail.com>
- Re: st: Collapse with sum function and missing values
- From: Michael Mitchell <Michael.Norman.Mitchell@gmail.com>
- Re: st: Collapse with sum function and missing values
- From: Scott Merryman <scott.merryman@gmail.com>
- RE: st: about the temporal desagragation
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: Collapse with sum function and missing values
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: Collapse with sum function and missing values
- From: Michael Mitchell <Michael.Norman.Mitchell@gmail.com>
- Re: st: about the temporal desagragation
- From: amatoallah ouchen <at.ouchen@gmail.com>
- st: re: Slow Stata
- From: Kit Baum <baum@bc.edu>
- st: Slow Stata
- From: Simon <scmoore.lists@googlemail.com>
- st: How to identify heterogeneous effects in (nn-) matching?
- From: Jen Zhen <jenzhen99@gmail.com>
- st: RE: How to lengthen a number
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: How to lengthen a number
- From: Eric Booth <ebooth@ppri.tamu.edu>
- re: st: AW: estout "could not open file"
- From: Kit Baum <baum@bc.edu>
- st: RE: How to lengthen a number
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: AW: estout "could not open file"
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: How to lengthen a number
- From: Nathan Hutto <nathandavidhutto@gmail.com>
- Re: st: How to lengthen a number
- From: Richard Goldstein <richgold@ix.netcom.com>
- re: st: AW: estout "could not open file"
- From: Kit Baum <baum@bc.edu>
- st: RE: re: test linear hypothese for probit
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: re: test linear hypothesis for probit
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: re: test linear hypothese for probit
- From: "Sun, Yan (IFPRI)" <Y.SUN@CGIAR.ORG>
- st: BCa bootstrap CIs: must I jackknife the entire sample?
- From: Roger Harbord <rmharbord@googlemail.com>
- st: RE: re: test linear hypothesis for probit
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: re: test linear hypothesis for probit
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Setting up time-varying variable data for Cox analysis
- From: Hsueh-Sheng Wu <wuh@bgsu.edu>
- Re: st: AW: estout "could not open file"
- From: Eric Booth <ebooth@ppri.tamu.edu>
- st: re: test linear hypothesis for probit
- From: "Sun, Yan (IFPRI)" <Y.SUN@CGIAR.ORG>
- st: Multivariate imputation using STATA
- From: Munyaradzi Dimairo <mdimairo@gmail.com>
- st: AW: Constructing a group level variable
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: AW: estout "could not open file"
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: AW: Constructing a group level variable
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: obtaining the frequencies used in histogram
- From: Ronan Conroy <rconroy@rcsi.ie>
- re: st: Collapse with sum function and missing values: correction
- From: "Airey, David C" <david.airey@Vanderbilt.Edu>
- st: Constructing a group level variable
- st: RE: Constructing a group level variable
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: analysing a case-cohort using Stcascoh and Stselpre
- From: <A.A.M.Vaarhorst@lumc.nl>
- Re: st: RE: Tracing dofile execution
- From: Eric Booth <ebooth@ppri.tamu.edu>
- Re: st: update seqlogit
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: Scalling scatter plots together with by-option
- From: Austin Nichols <austinnichols@gmail.com>
- AW: st: Collapse with sum function and missing values
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Collapse with sum function and missing values
- From: "Elizabeth Allred" <lizard@hsph.harvard.edu>
- st: RE: AW: dealing with duplicate "pairs" of columns
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: Collapse with sum function and missing values
- From: Kit Baum <baum@bc.edu>
- Re: st: RE: Tracing dofile execution
- From: Kit Baum <baum@bc.edu>
- re: st: Collapse with sum function and missing values: correction
- From: Kit Baum <baum@bc.edu>
- st: Re: Updated ivreg2, xtivreg2 cluster option.
- From: Kit Baum <baum@bc.edu>
- st: AW: dealing with duplicate "pairs" of columns
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: dealing with duplicate "pairs" of columns
- From: "Vitorino, Maria Ana" <vitorino@wharton.upenn.edu>
- Re: st: competing risks
- From: Enzo Coviello <enzo.coviello@tin.it>
- Re: st: update seqlogit
- From: Ángel Rodríguez Laso <angelrlaso@gmail.com>
- Re: st: update seqlogit
- From: Ángel Rodríguez Laso <angelrlaso@gmail.com>
- st: AW: marginal effects after ssm command
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: comparing datasets by string variable
- From: "Alessandro Gambini" <a.gambini@univpm.it>
- st: AW: comparing datasets by string variable
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Testing multiple inequality constraints of regression parameters in STATA
- From: Fardad Zand <fardad.zand@gmail.com>
- st:marginal effects after ssm command
- From: "Arantza Ugidos" <arantza.ugidos@ehu.es>
- RE: st: Collapse with sum function and missing values
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: competing risks
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- AW: st: Collapse with sum function and missing values
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: competing risks
- From: raoul reulen <r.c.reulen@gmail.com>
- Re: st: Collapse with sum function and missing values
- From: raoul reulen <r.c.reulen@gmail.com>
- st: AW: Collapse with sum function and missing values
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Collapse with sum function and missing values
- From: Joseph McDonnell <jockmcdock@gmail.com>
- re: st: Collapse with sum function and missing values
- From: "Airey, David C" <david.airey@Vanderbilt.Edu>
- st: Collapse with sum function and missing values
- From: Michael Mitchell <Michael.Norman.Mitchell@gmail.com>
- st: Question on xtmixed
- From: vipul bhatt <vbhatt_22@yahoo.co.in>
- RE: st: RE: Tracing dofile execution
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: RE: Tracing dofile execution
- From: David Elliott <dcelliott@gmail.com>
- Re: st: Re: AW: asis option
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: RE: AW: asis option
- From: "Klink, Andrew" <KLINKA@email.chop.edu>
- st: RE: Re: AW: asis option
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: RE: Tracing dofile execution
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Re: AW: asis option
- From: "Klink, Andrew" <KLINKA@email.chop.edu>
- Re: st: RE: Tracing dofile execution
- From: Eric Booth <ebooth@ppri.tamu.edu>
- st: RE: Tracing dofile execution
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: AW: estout "could not open file"
- From: "R. Jamil Jonna" <rjonna@uoregon.edu>
- st: Tracing dofile execution
- From: David Elliott <dcelliott@gmail.com>
- Re: st: weighted boxplot ?
- From: Jeph Herrin <junk@spandrel.net>
- st: RE: Scalling scatter plots together with by-option
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: Scalling scatter plots together with by-option
- From: "Jonathan Schulz" <Jonathan.Schulz@econ.ku.dk>
- st: AW: asis option
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: sixplot
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- st: asis option
- From: "Klink, Andrew" <KLINKA@email.chop.edu>
- st: RE: Updated ivreg2, xtivreg2 cluster option.
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: Updated ivreg2, xtivreg2 cluster option.
- From: Sungbok Lee <javanfish@tamu.edu>
- Re: st: about the temporal desagragation
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: nnmatch: Use only some observables for matching, and the others as regression controls?
- From: Jen Zhen <jenzhen99@gmail.com>
- st: about the temporal desagragation
- From: amatoallah ouchen <at.ouchen@gmail.com>
- Re: st: obtaining the frequencies used in histogram
- From: David Merriman <dmerrim@gmail.com>
- Re: st: obtaining the frequencies used in histogram
- From: David Merriman <dmerrim@gmail.com>
- st: re: RE: ivreg2, xtivreg2 updated
- From: Kit Baum <baum@bc.edu>
- Re: st: RE: AW: RE: ivreg2, xtivreg2 updated
- From: John Antonakis <john.antonakis@unil.ch>
- st: AW: estout "could not open file"
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: AW: RE: ivreg2, xtivreg2 updated
- From: DE SOUZA Eric <eric.de_souza@coleurope.eu>
- st: estout "could not open file"
- From: "R. Jamil Jonna" <rjonna@uoregon.edu>
- st: RE: ivreg2, xtivreg2 updated
- From: DE SOUZA Eric <eric.de_souza@coleurope.eu>
- st: AW: RE: ivreg2, xtivreg2 updated
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: ivreg2, xtivreg2 updated
- From: Kit Baum <baum@bc.edu>
- RE: st: obtaining the frequencies used in histogram
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: Re: st: areg vce(cluster id) for panel intraclass correlation on individual level?
- From: Björn Bünger <13bjbu@wiwi.uni-muenster.de>
- Re: st: gllamm - too few variables specified
- From: Neil Shephard <nshephard@gmail.com>
- Re: st: xtmixed: variation at the highest level
- From: Michael Norman Mitchell <Michael.Norman.Mitchell@gmail.com>
- Re: st: obtaining the frequencies used in histogram
- From: Scott Merryman <scott.merryman@gmail.com>
- Re: st: obtaining the frequencies used in histogram
- From: David Merriman <dmerrim@gmail.com>
- Re: st: xtmixed: variation at the highest level
- From: Michael Norman Mitchell <Michael.Norman.Mitchell@gmail.com>
- Re: st: obtaining the frequencies used in histogram
- From: Scott Merryman <scott.merryman@gmail.com>
- RE: st: keeping likelihood for every observation
- From: "Stephane Mahuteau" <smahutea@efs.mq.edu.au>
- st: obtaining the frequencies used in histogram
- From: David Merriman <dmerrim@gmail.com>
- st: xtmixed: variation at the highest level
- From: Peter Goff <peter.t.goff@vanderbilt.edu>
- st: Cox Calibration regression test & double graphs
- From: moleps <moleps2@gmail.com>
- st: gllamm - too few variables specified
- From: "Hillel Alpert" <HALPERT@hsph.harvard.edu>
- st: RE: RE : RE: nlcom from several estimations
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: Latent Variable and IV
- From: "Mafalda Sampaio" <mafaldasampaio@fe.unl.pt>
- RE: st: Latent Variable and IV
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- [no subject]
- st: RE : RE: nlcom from several estimations
- From: Valerie Orozco <Valerie.Orozco@toulouse.inra.fr>
- RE: st: Latent Variable and IV
- From: "Mafalda Sampaio" <mafaldasampaio@fe.unl.pt>
- RE: st: Latent Variable and IV
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: Latent Variable and IV
- From: mafaldasampaio <mafaldasampaio@fe.unl.pt>
- RE: st: weighted boxplot ?
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: AW: RE: RE: nlcom from several estimations
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: weighted boxplot ?
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: weighted boxplot ?
- From: Jeph Herrin <junk@spandrel.net>
- [no subject]
- st: RE: RE: nlcom from several estimations
- From: Valerie Orozco <Valerie.Orozco@toulouse.inra.fr>
- st: AW: RE: nlcom from several estimations
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: conceptual doubt about IV regressions: I have to exclude some exogenous regressors from first-stage!
- From: margherita Comola <margherita.comola@gmail.com>
- st: RE: nlcom from several estimations
- From: Valerie Orozco <Valerie.Orozco@toulouse.inra.fr>
- [no subject]
- st: RE: nlcom from several estimations
- From: Valerie Orozco <Valerie.Orozco@toulouse.inra.fr>
- st: -parttau- updated on SSC
- From: "Fiedler, James (JSC-SK)[USRA]" <james.fiedler-1@nasa.gov>
- Re: st: nlcom from several estimations
- From: John Antonakis <john.antonakis@unil.ch>
- st: AW: nlcom from several estimations
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: nlcom from several estimations
- From: Valerie Orozco <Valerie.Orozco@toulouse.inra.fr>
- st: Re: statalist-digest V4 #3694
- From: Katja Hillmann <katja.hillmann@wiso.uni-hamburg.de>
- st: analysing a case-cohort using Stcascoh and Stselpre
- From: <A.A.M.Vaarhorst@lumc.nl>
- Re: st: How to stack two correlation matrix tables into one big correlation matrix (lower and upper diagonal) table?
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: using xtnbreg; need for overdispersion at level 1
- From: "Lucas Bremer" <bremer@bwl.uni-kiel.de>
- st: How to stack two correlation matrix tables into one big correlation matrix (lower and upper diagonal) table?
- From: Kelvin Tan <kelvin.tan.statalist@gmail.com>
- st: re: Date: Sun, 7 Feb 2010 21:41:16 +0100
- From: Kit Baum <kitbaum@me.com>
- st: re: Date: Sun, 7 Feb 2010 21:41:16 +0100
- From: Kit Baum <baum@bc.edu>
- st: RE: Date: Sun, 7 Feb 2010 21:41:16 +0100
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: re:
- From: Kit Baum <baum@bc.edu>
- Re: st: RE: variable label length limit
- From: Steven Dubnoff <sdubnoff@circlesys.com>
- st: RE: Date: Sun, 7 Feb 2010 21:41:16 +0100
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Date: Sun, 7 Feb 2010 21:41:16 +0100
- From: Mark Baerthel <mail2markb@googlemail.com>
- st: re: missing dataset for chapters 4.2 and 4.3 in "An Itroduction to Stata
- From: Kit Baum <baum@bc.edu>
- st: RE: variable label length limit
- From: Phil Schumm <pschumm@uchicago.edu>
- st: RE: New versions of/extensions to ivreg2, xtivreg2, ranktest, xtoverid, ivreg29
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: missing dataset for chapters 4.2 and 4.3 in "An Itroduction to Stata Programming" (C.F.Baum)
- From: Dragutin Culinovic <dragutin.statalist@gmail.com>
- st: RE: variable label length limit
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: AW: variable label length limit
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: variable label length limit
- From: Marcus L Britton <britton@uwm.edu>
- st: -stripplot- on SSC updated
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: RE: RE: How to put percentiles texts in box (Distribution) plot
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: keeping likelihood for every observation
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: Re: st: keeping likelihood for every observation
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: keeping likelihood for every observation
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: RE: Persistency measurement on unbalanced panel (dynamic panel regression)
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Persistency measurement on unbalanced panel (dynamic panel regression)
- From: "Christian Stammschulte" <cstamms@googlemail.com>
- st: Random effect Kappa?
- From: Eduardo Nunez <enunezb@gmail.com>
- st: keeping likelihood for every observation
- From: "Stephane Mahuteau" <smahutea@efs.mq.edu.au>
- RE: st: confirm file(s) exist before processing - thread closed
- From: "Trelle Sven" <strelle@ctu.unibe.ch>
- st: RE: RE: Looping in each of 5 imputed datasets
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: Looping in each of 5 imputed datasets
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: re: How to correct standard errors of a 2sls performed by
- From: Kit Baum <baum@bc.edu>
- RE: st: re: How to correct standard errors of a 2sls performed by
- From: DE SOUZA Eric <eric.de_souza@coleurope.eu>
- st: Looping in each of 5 imputed datasets
- From: "Anna D. Johnson" <adj2106@columbia.edu>
- Re: st: re: How to correct standard errors of a 2sls performed by
- From: John Antonakis <john.antonakis@unil.ch>
- st: instrumenting two endogenous variables and their interaction term
- From: Nirina F <fstata@gmail.com>
- st: re: How to correct standard errors of a 2sls performed by
- From: Kit Baum <baum@bc.edu>
- RE: st: Re: How to correct standard errors of a 2sls performed by
- From: DE SOUZA Eric <eric.de_souza@coleurope.eu>
- Re: st: Re: How to correct standard errors of a 2sls performed by
- From: John Antonakis <john.antonakis@unil.ch>
- st: Re: How to correct standard errors of a 2sls performed by
- From: Kit Baum <baum@bc.edu>
- st: New versions of/extensions to ivreg2, xtivreg2, ranktest, xtoverid, ivreg29
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- Re: st: re: How to correct standard errors of a 2sls performed by
- From: John Antonakis <john.antonakis@unil.ch>
- st: re: How to correct standard errors of a 2sls performed by
- From: Kit Baum <baum@bc.edu>
- st: re: How to correct standard errors of a 2sls performed by
- From: Kit Baum <baum@bc.edu>
- RE: st: re: How to correct standard errors of a 2sls performed by hand ?
- From: Anne-Sophie Bergerès <macadamianesofie@hotmail.com>
- Re: st: Attempt to summarize how to avoid a forbidden regression with -IVREG2-, and some questions to ask
- From: Kelvin Tan <kelvin.tan.statalist@gmail.com>
- Re: st: re: How to correct standard errors of a 2sls performed by hand ?
- From: John Antonakis <john.antonakis@unil.ch>
- st: re: How to correct standard errors of a 2sls performed by hand ?
- From: Kit Baum <baum@bc.edu>
- st: Using APIM with a dichotomous outcome
- From: jason mitchell <jasw.mitchell@gmail.com>
- RE: st: RE: How to correct standard errors of a 2sls performed by hand ?
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: RE: How to put percentiles texts in box (Distribution) plot
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: How to put percentiles texts in box (Distribution) plot
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: RE: How to correct standard errors of a 2sls performed by hand ?
- From: Anne-Sophie Bergerès <macadamianesofie@hotmail.com>
- st: How to put percentiles texts in box (Distribution) plot
- From: "Heekyung Kim" <hekim@mit.edu>
- RE: st: nlsur error cannot have fewer observations than parameters
- From: "Nelson, Carl" <chnelson@illinois.edu>
- st: RE: How to correct standard errors of a 2sls performed by hand ?
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: How to correct standard errors of a 2sls performed by hand ?
- From: Anne-Sophie Bergerès <macadamianesofie@hotmail.com>
- Re: st: nlsur error cannot have fewer observations than parameters
- From: Austin Nichols <austinnichols@gmail.com>
- st: nlsur error cannot have fewer observations than parameters
- From: "Nelson, Carl" <chnelson@illinois.edu>
- st: RE : RE: RE: Problem with "ereturn post" command
- From: Valerie Orozco <Valerie.Orozco@toulouse.inra.fr>
- Re: st: Multicollinearity test
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: Multicollinearity test
- From: Rosie Chen <jiarongchen2002@yahoo.com>
- Re: st: Multicollinearity test
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: Multicollinearity test
- From: Rosie Chen <jiarongchen2002@yahoo.com>
- st: RE: Problem with "ereturn post" command
- From: Kit Baum <baum@bc.edu>
- st: RE : RE: RE: Problem with "ereturn post" command
- From: Valerie Orozco <Valerie.Orozco@toulouse.inra.fr>
- RE: st: power calculations
- From: "Edgar Munoz" <munozedg@hotmail.com>
- RE: st: RE: AW: Converting country names into numbers
- From: DE SOUZA Eric <eric.de_souza@coleurope.eu>
- Re: st: constructing and implementing logistic regression
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: AW: AW: calculation within a panel
- From: Rodrigo Briceño <rjbriceno@gmail.com>
- Re: st: RE: AW: Converting country names into numbers
- From: Eric Booth <ebooth@ppri.tamu.edu>
- Re: st: Offset option in SSM
- From: Shige Song <shigesong@gmail.com>
- st: Offset option in SSM
- From: Shige Song <shigesong@gmail.com>
- st: test for autocorrelation
- From: Katja Hillmann <katja.hillmann@wiso.uni-hamburg.de>
- R: st: AW: ordered probit
- From: "fabrizio_ferriani@libero.it" <fabrizio_ferriani@libero.it>
- R: Re: st: ordered probit
- From: "fabrizio_ferriani@libero.it" <fabrizio_ferriani@libero.it>
- Re: st: ordered probit
- From: Tirthankar Chakravarty <tirthankar.chakravarty@gmail.com>
- st: AW: ordered probit
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: RE: function evaluator program
- From: "Nelson, Carl" <chnelson@illinois.edu>
- st: ordered probit
- From: "fabrizio_ferriani@libero.it" <fabrizio_ferriani@libero.it>
- st: RE: RE: Problem with "ereturn post" command
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: Problem with "ereturn post" command
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: function evaluator program
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- [no subject]
- RE: st: confirm file(s) exist before processing
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: Programming Stata
- From: Marcello Pagano <pagano@hsph.harvard.edu>
- Re: st: esttab ci layout
- From: Miranda Kim <mk@mrc.soton.ac.uk>
- st: re: Converting country names into numbers
- From: "Yong Yang" <Yong.Yang@brunel.ac.uk>
- st: RE: AW: Converting country names into numbers
- From: DE SOUZA Eric <eric.de_souza@coleurope.eu>
- st: AW: Converting country names into numbers
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: AW: Converting country names into numbers
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: esttab ci layout
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: Converting country names into numbers
- From: DE SOUZA Eric <eric.de_souza@coleurope.eu>
- st: esttab ci layout
- From: Miranda Kim <mk@mrc.soton.ac.uk>
- Re: st: power calculations
- From: Neil Shephard <nshephard@gmail.com>
- st: AW: sqset options: keeplongest vs. trim from Brzinsky-Fay,Kohler, and Luniak, 2006
- From: "Kaulisch, Marc" <kaulisch@forschungsinfo.de>
- Re: st: function evaluator program
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: Question regarding Stata 11
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: constructing and implementing logistic regression
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: power calculations
- From: "Airey, David C" <david.airey@Vanderbilt.Edu>
- st: Question regarding Stata 11
- From: "Jitian Sheu" <jtsheu@mail.cgu.edu.tw>
- Re: st: confirm file(s) exist before processing
- From: Stas Kolenikov <skolenik@gmail.com>
- st: RE: constructing and implementing logistic regression
- From: "Verkuilen, Jay" <JVerkuilen@gc.cuny.edu>
- st: constructing and implementing logistic regression
- From: Mike Smith <mike.colinsmith@yahoo.com>
- st: confirm file(s) exist before processing
- From: "Trelle Sven" <strelle@ctu.unibe.ch>
- st: power calculations
- From: louise hornstrup <louisehornstrup@hotmail.com>
- st: Problem with "ereturn post" command
- From: Valerie Orozco <Valerie.Orozco@toulouse.inra.fr>
- st: function evaluator program
- From: "Nelson, Carl" <chnelson@illinois.edu>
- Re: st: svy:tab why standard error and confidence intervals for count are different than for
- From: jpitblado@stata.com (Jeff Pitblado, StataCorp LP)
- st: RE: Why do logit model coefficients produce signs opposite to those obtained from OLS?
- From: "Verkuilen, Jay" <JVerkuilen@gc.cuny.edu>
- Re: st: two questions about e(V) and e(V_modelbased) after estimation commands
- From: "Michael I. Lichter" <MLichter@Buffalo.EDU>
- AW: st: RE: New rules
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: RE: bug with -noextend- option?
- From: vwiggins@stata.com (Vince Wiggins, StataCorp)
- RE: st: RE: New rules
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- st: Could you please post the following enquiry into the statalist, thank you
- From: "Yong Yang" <Yong.Yang@brunel.ac.uk>
- Re: st: two questions about e(V) and e(V_modelbased) after estimation commands
- From: jpitblado@stata.com (Jeff Pitblado, StataCorp LP)
- Re: st: -if- and r() in -histogram-
- From: jpitblado@stata.com (Jeff Pitblado, StataCorp LP)
- st: Summer School on Modern Methods in Biostatistics and Epidemiology
- From: stata <stata.rino@gmail.com>
- Re: st: AW: Why do logit model coefficients produce signs opposite to those obtained from OLS?
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: RE: AW: Why do logit model coefficients produce signs opposite to those obtained from OLS?
- From: "Jitian Sheu" <jtsheu@mail.cgu.edu.tw>
- Re: st: Why do logit model coefficients produce signs opposite to those obtained from OLS?
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: AW: Why do logit model coefficients produce signs opposite to those obtained from OLS?
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Why do logit model coefficients produce signs opposite to those obtained from OLS?
- From: "Jitian Sheu" <jtsheu@mail.cgu.edu.tw>
- AW: st: A paranoid-sounding problem
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: A paranoid-sounding problem
- From: Matthias Wasser <matthias.wasser@gmail.com>
- Re: st: A paranoid-sounding problem
- From: Jeph Herrin <jeph.herrin@yale.edu>
- AW: AW: st: -if- and r() in -histogram-
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: AW: st: -if- and r() in -histogram-
- From: Antoine Terracol <Antoine.Terracol@univ-paris1.fr>
- RE: st: RE: bug with -noextend- option?
- From: philippe van kerm <philippe.vankerm@ceps.lu>
- AW: AW: AW: st: -if- and r() in -histogram-
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: AW: AW: calculation within a panel
- From: Rodrigo Briceño <rjbriceno@gmail.com>
- Re: AW: AW: st: -if- and r() in -histogram-
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- AW: AW: st: -if- and r() in -histogram-
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: AW: st: -if- and r() in -histogram-
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: areg vce(cluster id) for panel intraclass correlation on individual level?
- From: Nils Braakmann <nilsbraakmann@googlemail.com>
- Re: AW: st: -if- and r() in -histogram-
- From: Antoine Terracol <Antoine.Terracol@univ-paris1.fr>
- AW: st: -if- and r() in -histogram-
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: -if- and r() in -histogram-
- From: Antoine Terracol <Antoine.Terracol@univ-paris1.fr>
- Re: st: -if- and r() in -histogram-
- From: Antoine Terracol <Antoine.Terracol@univ-paris1.fr>
- st: xtmixed and res(rspec)
- From: Garry Anderson <g.anderson@unimelb.edu.au>
- Re: st: shared frailty
- From: "V. Martini" <vinmar0@hotmail.com>
- st: areg vce(cluster id) for panel intraclass correlation on individual level?
- From: Björn Bünger <13bjbu@wiwi.uni-muenster.de>
- Re: st: Re: Censored demand estimation
- From: nigussie Tefera <nitefera@yahoo.com>
- Re: st: Attempt to summarize how to avoid a forbidden regression with -IVREG2-, and some questions to ask
- From: Kelvin Tan <kelvin.tan.statalist@gmail.com>
- RE: st: RE: New rules
- From: "ewruck@econalytics.com" <ewruck@econalytics.com>
- st: Programs for text processing: a chronology (updated)
- From: Kit Baum <baum@bc.edu>
- st: RE: svy:tab why standard error and confidence intervals for count are different than for percentages [SEC=UNCLASSIFIED]
- From: "Kieran McCaul" <Kieran.McCaul@uwa.edu.au>
- RE: st: New rules
- From: "Kieran McCaul" <Kieran.McCaul@uwa.edu.au>
- Re: st: RE: Problem using -ivhettest-
- From: "Joao Ricardo F. Lima" <jricardofl@gmail.com>
- st: svy:tab why standard error and confidence intervals for count are different than for percentages [SEC=UNCLASSIFIED]
- From: "Adhikari, Pramod" <pramod.adhikari@aihw.gov.au>
- st: Re: RE: Rosner Text
- From: "Carl Mastropaolo" <accuscience@comcast.net>
- st: RE: Rosner Text
- From: "Visintainer PhD, Paul" <Paul.Visintainer@baystatehealth.org>
- st: Re: RE: Rosner
- From: "Carl Mastropaolo" <accuscience@comcast.net>
- st: Re: Censored demand estimation
- From: Jorge Eduardo Pérez Pérez <perez.jorge@ur.edu.co>
- st: RE: Rosner
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- st: Rosner Text
- From: "Carl Mastropaolo" <accuscience@comcast.net>
- st: Rosner
- From: "Carl Mastropaolo" <accuscience@comcast.net>
- st: RE: Problem using -ivhettest-
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: Problem using -ivhettest-
- From: "Joao Ricardo F. Lima" <jricardofl@gmail.com>
- st: putting stored estimates into a table
- From: moleps <moleps2@gmail.com>
- Re: st: RE: RE: RE: time trends in incidence rates and joinpoint analysis in stata
- From: moleps <moleps2@gmail.com>
- st: Programs for text processing: a chronology
- From: Christopher Baum <baum@bc.edu>
- Antwort: st: Censored demand estimation
- From: Richard Ochmann <rochmann@diw.de>
- Re: st: What multiple regression model for extreme distributions
- From: Austin Nichols <austinnichols@gmail.com>
- st: RE: RE: RE: mean, mode or median for missing values
- From: "Verkuilen, Jay" <JVerkuilen@gc.cuny.edu>
- RE: st: What multiple regression model for extreme distributions
- From: "Verkuilen, Jay" <JVerkuilen@gc.cuny.edu>
- st: RE: RE: mean, mode or median for missing values
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: IV modeling in a multi-level scenario
- From: "Lee, Ken" <klee@mitre.org>
- st: two questions about e(V) and e(V_modelbased) after estimation commands
- From: "Michael I. Lichter" <mlichter@buffalo.edu>
- st: RE: mean, mode or median for missing values
- From: "Verkuilen, Jay" <JVerkuilen@gc.cuny.edu>
- st: Re: FW: Strata and Movestay
- From: Ana <analunhb@gmail.com>
- st: RE: RE: RE: time trends in incidence rates and joinpoint analysis in stata
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- st: RE: New rules
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- st: sqset options: keeplongest vs. trim from Brzinsky-Fay,Kohler, and Luniak, 2006
- From: Irune López Pérez <irunelopez@hotmail.com>
- st: Strata and Movestay
- From: Ana <analunhb@gmail.com>
- st: Censored demand estimation
- From: nigussie Tefera <nitefera@yahoo.com>
- st: AW: Preserving ereturn results in toto?
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: AW: Preserving ereturn results in toto?
- From: "Michael I. Lichter" <mlichter@buffalo.edu>
- Re: st: New rules
- From: Neil Shephard <nshephard@gmail.com>
- st: AW: Preserving ereturn results in toto?
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Preserving ereturn results in toto?
- From: "Michael I. Lichter" <mlichter@buffalo.edu>
- st: AW: Re: AW: display _request(macname)
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: xtmelogit model not converging
- From: "Hardy, Dale S" <Dale.S.Hardy@uth.tmc.edu>
- st: New rules
- From: <Stefan.Gawrich@hlpug.hessen.de>
- st: Re: AW: display _request(macname)
- From: "Carl Mastropaolo" <accuscience@comcast.net>
- st: AW: display _request(macname)
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: display _request(macname)
- From: "Carl Mastropaolo" <accuscience@comcast.net>
- Re: st: xtmelogit model not converging
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: Esther Philip is out of the office attending an all day conference.
- From: Esther Philip <Esther.Philip@sial.com>
- st: AW: AW: calculation within a panel
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: AW: calculation within a panel
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: AW: calculation within a panel
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: calculation within a panel
- From: Rodrigo Briceño <rjbriceno@gmail.com>
- st: Movestay and Strata
- From: Ana <analunhb@gmail.com>
- st: movestay and strata
- From: Ana <analunhb@gmail.com>
- RE: st: New rules
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- RE: st: New rules
- From: DE SOUZA Eric <eric.de_souza@coleurope.eu>
- Re: st: New rules
- From: Fred Wolfe <fwolfe@arthritis-research.org>
- Re: st: New rules
- From: Marcello Pagano <pagano@hsph.harvard.edu>
- RE: st: New rules
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: New rules
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- Re: st: New rules
- From: Neil Shephard <nshephard@gmail.com>
- RE: st: New rules
- From: DE SOUZA Eric <eric.de_souza@coleurope.eu>
- AW: st: New rules
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- AW: st: New rules
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: New rules
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- RE: <POSSIBLE SPAM>st: New rules
- From: DE SOUZA Eric <eric.de_souza@coleurope.eu>
- Re: st: mean, mode or median for missing values
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: RE: RE: time trends in incidence rates and joinpoint analysis in stata
- From: "Isabelle Deltour" <deltour@cancer.dk>
- Re: st: What multiple regression model for extreme distributions
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: mean, mode or median for missing values
- From: Jet <lsj555@gmail.com>
- RE: st: Hiding contents of a do-file
- From: Rasika Raghavan <rasikarag@gmail.com>
- Re: st: mean, mode or median for missing values
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- st: mean, mode or median for missing values
- From: Jet <lsj555@gmail.com>
- Re: st: What multiple regression model for extreme distributions
- From: David Greenberg <dg4@nyu.edu>
- Re: st: New rules
- From: Jeph Herrin <jeph.herrin@yale.edu>
- st: RE: time trends in incidence rates and joinpoint analysis in stata
- From: "Kieran McCaul" <Kieran.McCaul@uwa.edu.au>
- st: time trends in incidence rates and joinpoint analysis in stata
- From: moleps <moleps2@gmail.com>
- st: New rules
- From: Marcello Pagano <pagano@hsph.harvard.edu>
- st: RE: Ben Jann and fanboys
- From: "Kieran McCaul" <Kieran.McCaul@uwa.edu.au>
- Re: st: What multiple regression model for extreme distributions
- From: Michael Norman Mitchell <Michael.Norman.Mitchell@gmail.com>
- RE: st: What multiple regression model for extreme distributions
- From: DE SOUZA Eric <eric.de_souza@coleurope.eu>
- Re: st: What multiple regression model for extreme distributions
- From: muhammed abdul khalid <muhammed.abdulkhalid@gmail.com>
- RE: st: shared frailty
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- RE: st: How to force stata to use different line pattern
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: How to convert string into lower case except the first letter
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: How to convert string into lower case except the first letter
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: What multiple regression model for extreme distributions
- From: Austin Nichols <austinnichols@gmail.com>
- st: shared frailty
- From: "V. Martini" <vinmar0@hotmail.com>
- Re: st: How to convert string into lower case except the first letter
- From: Austin Nichols <austinnichols@gmail.com>
- st: How to convert string into lower case except the first letter
- From: "Mike Kim" <kalisperos@gmail.com>
- st: xtmelogit model not converging
- From: "Hardy, Dale S" <Dale.S.Hardy@uth.tmc.edu>
- Re: st: How to convert string into lower case except the first letter
- From: Richard Goldstein <richgold@ix.netcom.com>
- Re: st: What multiple regression model for extreme distributions
- From: Ronan Conroy <rconroy@rcsi.ie>
- RE: RE: st: What multiple regression model for extreme distributions
- From: "Hardy, Dale S" <Dale.S.Hardy@uth.tmc.edu>
- Re: RE: st: What multiple regression model for extreme distributions
- From: Robert A Yaffee <bob.yaffee@nyu.edu>
- RE: st: RE: bug with -noextend- option?
- From: "Fiedler, James (JSC-SK)[USRA]" <james.fiedler-1@nasa.gov>
- AW: st: RE: bug with -noextend- option?
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- RE: st: RE: bug with -noextend- option?
- From: "Fiedler, James (JSC-SK)[USRA]" <james.fiedler-1@nasa.gov>
- st: R: R: Censored observation in survival data
- From: "Carlo Lazzaro" <carlo.lazzaro@tin.it>
- RE: st: RE: bug with -noextend- option?
- From: "Fiedler, James (JSC-SK)[USRA]" <james.fiedler-1@nasa.gov>
- RE:st: Censored observation in survival data
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: Re: [renamed] Factor Analysis and Missing Data
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: Re: R: Censored observation in survival data
- From: Nikolaos Pandis <npandis@yahoo.com>
- RE: st: What multiple regression model for extreme distributions
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: R: Censored observation in survival data
- From: "Carlo Lazzaro" <carlo.lazzaro@tin.it>
- Re: st: What multiple regression model for extreme distributions
- From: Filipa de Castro <filipa.castro@gmail.com>
- Re: st: How to force stata to use different line pattern
- From: Abdel Rahmen El Lahga <rahmen.lahga@gmail.com>
- st: RE: What multiple regression model for extreme distributions
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- AW: st: What multiple regression model for extreme distributions
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: What multiple regression model for extreme distributions
- From: Filipa de Castro <filipa.castro@gmail.com>
- Re: st: Censored observation in survival data
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: AW: What multiple regression model for extreme distributions
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: What multiple regression model for extreme distributions
- From: muhammed abdul khalid <muhammed.abdulkhalid@gmail.com>
- Re: st: AW: axis title options
- From: Miranda Kim <mk@mrc.soton.ac.uk>
- Re: st: AW: axis title options
- From: Scott Merryman <scott.merryman@gmail.com>
- st: Re: [renamed] Factor Analysis and Missing Data
- From: "Joseph Coveney" <jcoveney@bigplanet.com>
- Re: st: AW: axis title options
- From: Miranda Kim <mk@mrc.soton.ac.uk>
- Re: st: AW: axis title options
- From: Scott Merryman <scott.merryman@gmail.com>
- st: Censored observation in survival data
- From: Nikolaos Pandis <npandis@yahoo.com>
- Re: st: AW: axis title options
- From: Miranda Kim <mk@mrc.soton.ac.uk>
- Re: st: AW: axis title options
- From: Scott Merryman <scott.merryman@gmail.com>
- Re: st: AW: axis title options
- From: Miranda Kim <mk@mrc.soton.ac.uk>
- Re: st: Roy Wada
- From: Marcello Pagano <pagano@hsph.harvard.edu>
- Re: st: RE: Ben Jann and fanboys
- From: Marcello Pagano <pagano@hsph.harvard.edu>
- Re: st: RE: RE: RE: Equivalent to "more" inside a loop
- From: Thomas Speidel <thomas@speidel.ca>
- RE: st: AW: axis title options
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: AW: axis title options
- From: Miranda Kim <mk@mrc.soton.ac.uk>
- st: Estimation Technique for Cross Sectional Models
- From: "M. Rodwan Abouharb" <m.abouharb@ucl.ac.uk>
- st: AW: axis title options
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: axis title options
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: problem with xmluse columns get misaligned
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: axis title options
- From: Miranda Kim <mk@mrc.soton.ac.uk>
- st: RE: Ben Jann and fanboys
- From: "Daniel Mackay" <d.mackay@lbss.gla.ac.uk>
- RE: st: marginal effects in biprobit and average treatment effect in switching probit
- From: "Paula Albuquerque" <pcma@iseg.utl.pt>
- RE: Re: st: Multiplying coefficients and standard errors in -estout- & linear probability models
- From: "Stephen P. Jenkins" <stephenj@essex.ac.uk>
- st: problem with xmluse columns get misaligned
- From: roland andersson <rolandersson@gmail.com>
- Re: st: [renamed] Factor Analysis and Missing Data
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: [renamed] Factor Analysis and Missing Data
- From: Michael Norman Mitchell <Michael.Norman.Mitchell@gmail.com>
- Re: st: Ben Jann and fanboys
- From: Jet <lsj555@gmail.com>
- re: st: Ben Jann and fanboys
- From: "Airey, David C" <david.airey@Vanderbilt.Edu>
- st: Ben Jann and fanboys
- From: Roy Wada <roywada@gmail.com>
- Re: st: How to force stata to use different line pattern
- From: Scott Merryman <scott.merryman@gmail.com>
- Re: st: reshape question
- From: Scott Merryman <scott.merryman@gmail.com>
- Re: st: RE: bug with -noextend- option?
- From: Scott Merryman <scott.merryman@gmail.com>
- Re: st: reshape question
- From: Alan Acock <acock@mac.com>
- re: st: Roy Wada
- From: "Airey, David C" <david.airey@Vanderbilt.Edu>
- Re: st: reshape question
- From: Michael Norman Mitchell <Michael.Norman.Mitchell@gmail.com>
- Re: st: Multiplying coefficients and standard errors in -estout-
- From: Ben Jann <ben.jann@gmail.com>
- st: Roy Wada
- From: Ben Jann <ben.jann@gmail.com>
- st: reshape question
- From: Alan Acock <acock@mac.com>
- Re: st: Equivalent to "more" inside a loop
- From: Thomas Speidel <thomas@tmbx.com>
- st: How to force stata to use different line pattern
- From: Abdel Rahmen El Lahga <rahmen.lahga@gmail.com>
- st: RE: RE: RE: Equivalent to "more" inside a loop
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: RE: Equivalent to "more" inside a loop
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Equivalent to "more" inside a loop
- From: Roger Harbord <rmharbord@googlemail.com>
- st: RE: RE: Equivalent to "more" inside a loop
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: Equivalent to "more" inside a loop
- From: Richard Goldstein <richgold@ix.netcom.com>
- st: Corrado test
- From: "Simone Spleis" <simonespleis@gmx.de>
- st: RE: Equivalent to "more" inside a loop
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: RE: Equivalent to "more" inside a loop
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: Equivalent to "more" inside a loop
- From: Thomas Speidel <thomas@tmbx.com>
- st: RE: bug with -noextend- option?
- From: "Fiedler, James (JSC-SK)[USRA]" <james.fiedler-1@nasa.gov>
- st: SSC Activity, Jan 2010
- From: Kit Baum <baum@bc.edu>
- RE: st: Hiding contents of a do-file
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: GLLAAMM-Structural equations
- From: "Verkuilen, Jay" <JVerkuilen@gc.cuny.edu>
- Re: st: movestay and strata
- From: Ana <analunhb@gmail.com>
- Re: st: marginal effects in biprobit and average treatment effect in switching probit
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: Multiplying coefficients and standard errors in -estout-
- From: Bert Jung <bjung59@gmail.com>
- st: R: AW: R: Fw: Calculating a confidence interval for population variance based upon sample.
- From: "Carlo Lazzaro" <carlo.lazzaro@tin.it>
- RE: st: RE: PSMATCH2 and panel data
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- Re: st: RE: PSMATCH2 and panel data
- From: Austin Nichols <austinnichols@gmail.com>
- st: Calculating a confidence interval for population variance based upon sample.
- From: "Carl Mastropaolo" <accuscience@comcast.net>
- st: Two Questions about Multiple Imputation using ice Command
- From: promising2010@gmail.com
- Re: st: RE: RE: RE: Fw: Calculating a confidence interval for population variance based upon sample.
- From: Tirthankar Chakravarty <tirthankar.chakravarty@gmail.com>
- st: RE: RE: RE: Fw: Calculating a confidence interval for population variance based upon sample.
- From: "Visintainer PhD, Paul" <Paul.Visintainer@baystatehealth.org>
- st: RE: RE: Fw: Calculating a confidence interval for population variance based upon sample.
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- st: RE: Making tables with ttest
- From: "Nuno Soares" <ndsoares@gmail.com>
- st: RE: AW: R: Fw: Calculating a confidence interval for population variance based upon sample.
- From: "Lachenbruch, Peter" <Peter.Lachenbruch@oregonstate.edu>
- st: AW: AW: Making tables with ttest
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Making tables with ttest
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: AW: Making tables with ttest
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- [no subject]
- [no subject]
- Re: st: Sample selection in fixed effects model
- From: "mw N. van Horen" <N.van.Horen@DNB.NL>
- st: Making tables with ttest
- From: "Nuno Soares" <ndsoares@gmail.com>
- AW: st: Sample selection in fixed effects model
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: GLLAAMM-Structural equations
- From: <arosella@media.it>
- st: Breush Pagan Test For XTSUR
- From: "Brown, Heather" <h.brown@abdn.ac.uk>
- [no subject]
- [no subject]
- Re: st: Sample selection in fixed effects model
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: RE: Fw: Calculating a confidence interval for population variance based upon sample.
- From: "Visintainer PhD, Paul" <Paul.Visintainer@baystatehealth.org>
- st: AW: R: Fw: Calculating a confidence interval for population variance based upon sample.
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- st: Sample selection in fixed effects model
- From: "mw N. van Horen" <N.van.Horen@DNB.NL>
- st: R: Fw: Calculating a confidence interval for population variance based upon sample.
- From: "Carlo Lazzaro" <carlo.lazzaro@tin.it>
- st: marginal effects in biprobit and average treatment effect in switching probit
- From: "Paula Albuquerque" <pcma@iseg.utl.pt>
- st: Fw: Calculating a confidence interval for population variance based upon sample.
- From: "Carl Mastropaolo" <accuscience@comcast.net>
- RE: st: Hiding contents of a do-file
- From: Rasika Raghavan <rasikarag@gmail.com>
- st: problem with xmluse columns get misaligned
- From: roland andersson <rolandersson@gmail.com>
- RE: st: Hiding contents of a do-file
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: Static panel data for simultaneous equations system
- From: Kit Baum <baum@bc.edu>
- Re: st: Multiplying coefficients and standard errors in -estout-
- From: Kit Baum <baum@bc.edu>
- st: Hiding contents of a do-file
- From: Rasika Raghavan <rasikarag@gmail.com>
- AW: st: Hiding contents of a do-file
- From: Rasika Raghavan <rasikarag@gmail.com>
- AW: st: Hiding contents of a do-file
- From: "Martin Weiss" <martin.weiss1@gmx.de>
- Re: st: Hiding contents of a do-file
- From: Rasika Raghavan <rasikarag@gmail.com>
- st: Re: Filling missing values
- From: Jorge Eduardo Perez Perez <jorpppp@gmail.com>
- st: Calculating a confidence interval for population variance based upon sample.
- From: Carl Mastropaolo <accuscience@comcast.net>
- st: RE: RE: change local macro
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: PSMATCH2 and panel data
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: Multiplying coefficients and standard errors in -estout-
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: Filling missing values
- From: Maarten buis <maartenbuis@yahoo.co.uk>
Mail converted by MHonArc