---

Statalist archive (ordered by date)
(last updated Tue Aug 31 18:00:20 2004)

• Thread index

---

• Re: st: isolating characters in the middle of a long number
  • From: David Kantor <[email protected]>
• st: panel var-x
  • From: "John D. Levendis" <[email protected]>
• Re: st: isolating characters in the middle of a long number
  • From: Kenley Barrett <[email protected]>
• Re: st: stumped with lincom after svymean
  • From: [email protected] (Jeff Pitblado, StataCorp LP)
• Re: st: isolating characters in the middle of a long number
  • From: David Kantor <[email protected]>
• st: isolating characters in the middle of a long number
  • From: Kenley Barrett <[email protected]>
• st: censored model with sample selection
  • From: "Daniel Caro" <[email protected]>
• Re: st: stumped with lincom after svymean
  • From: <[email protected]>
• Re: st: enhanced do-file editor
  • From: Michael McCulloch <[email protected]>
• st: RE: one tailed F statistics from TEST
  • From: "Yulia Marchenko" <[email protected]>
• Re: st: enhanced do-file editor
  • From: Ron�n Conroy <[email protected]>
• st: RE: enhanced do-file editor
  • From: "Wallace, John" <[email protected]>
• Re: st: stumped with lincom after svymean
  • From: [email protected] (Jeff Pitblado, StataCorp LP)
• st: enhanced do-file editor
  • From: Amit Khandelwal <[email protected]>
• st: Re: Input problem with comma
  • From: "Bjorn Van Campenhout" <[email protected]>
• st: RE: stumped with lincom after svymean
  • From: "Nichols, Austin" <[email protected]>
• st: stumped with lincom after svymean
  • From: "Robert Bozick" <[email protected]>
• Re: st: Computing marginal effects after random effects probit
  • From: May Boggess <[email protected]>
• Re: st: plotting multiple normal densities
  • From: Nick Winter <[email protected]>
• st: xttobit and u normally distributed
  • From: "Verschuuren, M." <[email protected]>
• st: plotting multiple normal densities
  • From: "Dan Rigby" <[email protected]>
• st: Log pseudo-likelihood
  • From: Edlira Narazani <[email protected]>
• st: RE: Re: obtaining confidence intervals after mfx compute
  • From: Kit Baum <[email protected]>
• st: Re: mfx after probit
  • From: Kit Baum <[email protected]>
• st: one tailed F statistics from TEST
  • From: "Xuefeng (John) Jiang" <[email protected]>
• st: Input problem with comma
  • From: Tobias Hubert <[email protected]>
• SV: st: treatreg
  • From: "Kjerstad Egil (SNF)" <[email protected]>
• Re: st:meta-analysis
  • From: Tom Trikalinos <[email protected]>
• st:meta-analysis
  • From: "cui liwei" <[email protected]>
• st: Re: Computing marginal effects after random effects probit
  • From: Friedrich Huebler <[email protected]>
• st: weights in clogit/xtlogit, fe
  • From: Jesper Sorensen <[email protected]>
• st: xthtaylor
  • From: "Michael Johnson" <[email protected]>
• st: Computing marginal effects after random effects probit
  • From: "Aparna Mathur" <[email protected]>
• Re: st: Need separate lines in twoway rcapsym
  • From: Nick Cox <[email protected]>
• st: -reorder- on SSC
  • From: Nick Cox <[email protected]>
• st: Re: Problems with -update
  • From: "Kevin Crow - StataCorp" <[email protected]>
• st: RE: Re: obtaining confidence intervals after mfx compute
  • From: "Jose A. Aleman" <[email protected]>
• st: RE: RE: comparing coefficients
  • From: "Hoetker, Glenn" <[email protected]>
• st: Need separate lines in twoway rcapsym
  • From: "Wagner, Joseph" <[email protected]>
• st: RE: comparing coefficients
  • From: "Nichols, Austin" <[email protected]>
• st: comparing coefficients
  • From: Ricardo Ovaldia <[email protected]>
• st: -center- updated on SSC
  • From: "Jann, Ben" <[email protected]>
• st: RE: 2SLS or intrumental variable(s) in multilevel modeling framework
  • From: Tesfayi Gebre <[email protected]>
• Re: st: converting a string into a date
  • From: Nick Cox <[email protected]>
• Re: Re: st: Re: destringing
  • From: Nick Cox <[email protected]>
• st: test for the stability of a subset of coefficients?
  • From: chen jie <[email protected]>
• st: re: destring
  • From: Marcello Pagano <[email protected]>
• st: converting a string into a date
  • From: Fabrizio Stracci <[email protected]>
• st: re: destring
  • From: Marcello Pagano <[email protected]>
• st: Re: How to generate lagged variables
  • From: "R.E. De Hoyos" <[email protected]>
• st: How to generate lagged variables
  • From: "hotmail" <[email protected]>
• Re: Re: st: Re: destringing
  • From: "Christian Holz" <[email protected]>
• Re: st: Problems with -update
  • From: Andre Duszynski <[email protected]>
• Re: st: Problems with -update
  • From: Philip Ryan <[email protected]>
• st: Problems with -update
  • From: Andre Duszynski <[email protected]>
• RE: st: Kaplan Meier
  • From: "James Harris" <[email protected]>
• Re: st: Transformed values in logistic regression
  • From: Ricardo Ovaldia <[email protected]>
• Re: st: Kaplan Meier
  • From: Philip Ryan <[email protected]>
• st: Re: obtaining confidence intervals after mfx compute
  • From: Kit Baum <[email protected]>
• st: obtaining confidence intervals after mfx compute
  • From: "Jose A. Aleman" <[email protected]>
• Re: Re: st: Re: destringing
  • From: Christian Holz <[email protected]>
• st: Kaplan Meier
  • From: "Butt, Adeel" <[email protected]>
• Re: st: Re: destringing
  • From: Suzy <[email protected]>
• Re: st: Re: destringing
  • From: Suzy <[email protected]>
• Re: st: Re: destringing
  • From: Suzy <[email protected]>
• Re: st: Re: destringing
  • From: "Michael S. Hanson" <[email protected]>
• Re: st: Re: destringing
  • From: "Daniel Egan" <[email protected]>
• RE: st: Re: destringing
  • From: "Scott Merryman" <[email protected]>
• Re: st: Re: destringing
  • From: Suzy <[email protected]>
• st: Bootstrapping multiple stage estimations
  • From: "Gemma Tetlow" <[email protected]>
• st: RE Tobit models with endogenous variables
  • From: "Gemma Tetlow" <[email protected]>
• st: Re: destringing
  • From: Christopher F Baum <[email protected]>
• st: Re: destringing
  • From: Christopher F Baum <[email protected]>
• AW: st: Re: destringing values led to Stata recoding them as missing
  • From: "Christian Holz" <[email protected]>
• AW: st: Re: destringing values led to Stata recoding them as missing
  • From: "Christian Holz" <[email protected]>
• Re: st: Re: destringing values led to Stata recoding them as missing
  • From: Suzy <[email protected]>
• st: Re: destringing values led to Stata recoding them as missing
  • From: "Daniel Egan" <[email protected]>
• Re: st: RE: destringing values led to Stata recoding them as missing
  • From: Suzy <[email protected]>
• [no subject]
  • From: Unknown
• RE: st: RE: destringing values led to Stata recoding them as missing
  • From: "Wallace, John" <[email protected]>
• st: Does treatreg has a panel version?
  • From: "Michael Johnson" <[email protected]>
• Re: st: RE: destringing values led to Stata recoding them as missing
  • From: Suzy <[email protected]>
• Re: st: RE: destringing values led to Stata recoding them as missing
  • From: Suzy <[email protected]>
• st: RE: destringing values led to Stata recoding them as missing
  • From: "Wallace, John" <[email protected]>
• st: destringing values led to Stata recoding them as missing
  • From: Suzy <[email protected]>
• st: RE: data manipulation/reduction
  • From: "Nichols, Austin" <[email protected]>
• st: data manipulation/reduction
  • From: "Clint Thompson" <[email protected]>
• Re: st: Why do i get a failure all the time with this message?
  • From: Roger Newson <[email protected]>
• st: RE: Why do i get a failure all the time with this message?
  • From: "Nichols, Austin" <[email protected]>
• st: Why do i get a failure all the time with this message?
  • From: jebeling <[email protected]>
• st: RE: moving files from mainframe to stata
  • From: "Copeland, Laurel" <[email protected]>
• Re: st: calculrating confidence Intervals in svyprop statements
  • From: [email protected] (Jeff Pitblado, StataCorp LP)
• st: RE: "Default" settings in graphs
  • From: "Scott Merryman" <[email protected]>
• st: RE: "Default" settings in graphs
  • From: "Scott Merryman" <[email protected]>
• st: moving files from mainframe to stata
  • From: "Steve Barsby" <[email protected]>
• st: conformability error
  • From: Edlira Narazani <[email protected]>
• Re: st: Transformed values in logistic regression
  • From: Tim Wade <[email protected]>
• st: Re: simple slope and centering modules available on SSC
  • From: Jeffrey Simons <[email protected]>
• st: Re: APA - graph scheme ?
  • From: Jeffrey Simons <[email protected]>
• st: conformability error in ivtobit
  • From: "Monica L. Parra Torrado" <[email protected]>
• Re: st: Transformed values in logistic regression
  • From: Roger Newson <[email protected]>
• Re: st: Transformed values in logistic regression
  • From: "elmarsaathoff" <[email protected]>
• [no subject]
  • From: Unknown
• st: Data management - database question
  • From: "Elmar Saathoff (compuserve.de)" <[email protected]>
• Re: st: Transformed values in logistic regression
  • From: Daniel Feenberg <[email protected]>
• Re: st: Transformed values in logistic regression
  • From: Fred Wolfe <[email protected]>
• RE: st: filling previous missing observations repeatedly.
  • From: Edlira Narazani <[email protected]>
• st: Re: Nested If / then statement in a Bar Graph
  • From: "dr kardos laszlo" <[email protected]>
• Re: st: Transformed values in logistic regression
  • From: Roger Harbord <[email protected]>
• Re: st: Transformed values in logistic regression
  • From: Ronán Conroy <[email protected]>
• st: modelling asynchronous interval-censored data with time-varyingcovariates
  • From: Angus Campbell <[email protected]>
• Re: st: Transformed values in logistic regression
  • From: Richard Williams <[email protected]>
• st: Transformed values in logistic regression
  • From: Ricardo Ovaldia <[email protected]>
• st: time series data
  • From: Christopher F Baum <[email protected]>
• st: "Default" settings in graphs
  • From: "Elizabeth Allred" <[email protected]>
• Re: st: ranksum/Mann-Whitney command
  • From: Roger Newson <[email protected]>
• Re: st: More unpublicised dialog commands
  • From: Roger Newson <[email protected]>
• st: xtivreg and nonlinear stages
  • From: "Monica L. Parra Torrado" <[email protected]>
• Re: st: calculrating confidence Intervals in svyprop statements
  • From: <[email protected]>
• st: ranksum/Mann-Whitney command
  • From: "Holly Krier" <[email protected]>
• Re: st: More unpublicised dialog commands
  • From: [email protected] (James Hassell)
• st: labelmiss at SSC
  • From: Stas Kolenikov <[email protected]>
• Re: st: Automatic mean-centering?
  • From: "Clive Nicholas" <[email protected]>
• st: RE: RE: Interaction with an instrumented variable - IV
  • From: "Nichols, Austin" <[email protected]>
• st: RE: missing values with areg
  • From: "Nichols, Austin" <[email protected]>
• st: panel data regression (and dynamics), how to?
  • From: Wilson Chong <[email protected]>
• st: missing values with areg
  • From: [email protected]
• st: RE: Interaction with an instrumented variable - IV
  • From: "Nichols, Austin" <[email protected]>
• st: Interaction with an instrumented variable - IV
  • From: "Ngo,PT (pgr)" <[email protected]>
• Re: st: how to -tsset- this data?
  • From: "Michael S. Hanson" <[email protected]>
• Re: st: Automatic mean-centering?
  • From: "Jann, Ben" <[email protected]>
• st: Re: automatic mean centering.
  • From: Jeffrey Simons <[email protected]>
• Re: st: Upcoming NetCourses
  • From: David Harless <[email protected]>
• st: More unpublicised dialog commands
  • From: Roger Newson <[email protected]>
• Re: st: Re: save workspace
  • From: Arnold Kester <[email protected]>
• st: RE: constraints in reg3
  • From: "Neumayer,E" <[email protected]>
• st: how to -tsset- this data?
  • From: [email protected]
• RE: st: Gllamm, random effects and splines
  • From: "Moran, John (NWAHS)" <[email protected]>
• st: RE: program define
  • From: "Scott Merryman" <[email protected]>
• st: simulate
  • From: Kit Baum <[email protected]>
• st: RE: vecstable graph ?
  • From: "Scott Merryman" <[email protected]>
• st: program define
  • From: Frank Zhang <[email protected]>
• RE: st: Hansen's statistic with xtabond, robust?
  • From: "Salvati, Jean" <[email protected]>
• st: matsize & single exogeneity & autocorrel. in panel again
  • From: "vukasinm" <[email protected]>
• Re: st: Covariance matrice.
  • From: [email protected]
• Re: st: Shorrocks - Shapley deecomposition of poverty or inquality
  • From: [email protected]
• Re: st: xtnbreg and xtlogit
  • From: Stas Kolenikov <[email protected]>
• Re: st: Covariance matrice.
  • From: Stas Kolenikov <[email protected]>
• Re: st: Automatic mean-centering?
  • From: Nick Winter <[email protected]>
• Re: st: Automatic mean-centering?
  • From: "Winfield Scott Burhans" <[email protected]>
• Re: st: calculrating confidence Intervals in svyprop statements
  • From: Stas Kolenikov <[email protected]>
• st: constraints in reg3
  • From: Kit Baum <[email protected]>
• st: Using xtgraph with Stata version 8 graphics
  • From: Paul Seed <[email protected]>
• Re: st: Shorrocks - Shapley deecomposition of poverty or inquality
  • From: [email protected]
• Re: st: Shorrocks - Shapley decomposition of poverty or inequality
  • From: Stas Kolenikov <[email protected]>
• st: Shorrocks - Shapley deecomposition of poverty or inquality
  • From: "Gaston Gohou" <[email protected]>
• Re: st: Automatic mean-centering?
  • From: [email protected]
• Re: st: Automatic mean-centering?
  • From: "Sarah A. Mustillo" <[email protected]>
• Re: st: Automatic mean-centering?
  • From: Fred Wolfe <[email protected]>
• st: Automatic mean-centering?
  • From: "Clive Nicholas" <[email protected]>
• Re: st: Rename question
  • From: "Winfield Scott Burhans" <[email protected]>
• Re: st: Gllamm, random effects and splines
  • From: Stas Kolenikov <[email protected]>
• st: Upcoming NetCourses
  • From: "Kevin Crow, StataCorp" <[email protected]>
• Re: st: Rename question
  • From: "Clive Nicholas" <[email protected]>
• st: RE: RE: Rename question
  • From: samani Lamabadusuriya <[email protected]>
• st: RE: Rename question
  • From: "David Harrison" <[email protected]>
• st: Rename question
  • From: samani Lamabadusuriya <[email protected]>
• st: RE: Covariance matrice.
  • From: "FEIVESON, ALAN H. (AL) (JSC-SK) (NASA)" <[email protected]>
• Re: st: collapse if at least X or more obs. per group are non-missing
  • From: Nick Winter <[email protected]>
• Re: st: collapse if at least X or more obs. per group are non-missing
  • From: Nick Winter <[email protected]>
• st: Many thanks! Problem solved.
  • From: Jeremy Reynolds <[email protected]>
• Re: st: Hansen's statistic with xtabond, robust?
  • From: "Mark Schaffer" <[email protected]>
• st: RE: comparing logit coefficients
  • From: "Hoetker, Glenn" <[email protected]>
• st: non parametric test for multiple sites
  • From: "McCollum,Kelly" <[email protected]>
• st: comparing logit coefficients
  • From: Jeremy Reynolds <[email protected]>
• st: survival: stata vs R
  • From: Stas Kolenikov <[email protected]>
• st: Re: covariance
  • From: Christopher F Baum <[email protected]>
• st: Re:collapse
  • From: Christopher F Baum <[email protected]>
• st: copying results of fits and tables into a matrix
  • From: Jonathan Myles <[email protected]>
• st: Gllamm, random effects and splines
  • From: "Moran, John (NWAHS)" <[email protected]>
• RE: st: RE: Nested If / then statement in a Bar Graph
  • From: "Clive Nicholas" <[email protected]>
• st: Constrained regression in reg3
  • From: "Neumayer,E" <[email protected]>
• Re: st: xtnbreg and xtlogit
  • From: "Christian Wagner" <[email protected]>
• RE: st: RE: Nested If / then statement in a Bar Graph
  • From: "David Harrison" <[email protected]>
• Re: st: xtnbreg and xtlogit
  • From: Michael Ingre <[email protected]>
• st: xtnbreg and xtlogit
  • From: "Christian Wagner" <[email protected]>
• st: Estimating sqreg without a constant
  • From: Puja Vasudeva <[email protected]>
• st: Re: beta coefs
  • From: Christopher F Baum <[email protected]>
• st: re: GMM in Stata
  • From: Christopher F Baum <[email protected]>
• RE: st: RE: Nested If / then statement in a Bar Graph
  • From: "Clive Nicholas" <[email protected]>
• st: Happy Birthday
  • From: Marcello Pagano <[email protected]>
• Re: st: RE: Nested If / then statement in a Bar Graph
  • From: "Clive Nicholas" <[email protected]>
• st: Hansen's statistic with xtabond, robust?
  • From: "Salvati, Jean" <[email protected]>
• st: RE: VEC models and Johansen Procedure
  • From: "Gustavo Sanchez" <[email protected]>
• st: RE: calculrating confidence Intervals in svyprop statements
  • From: "Nichols, Austin" <[email protected]>
• st: Re: save workspace
  • From: "Michael Blasnik" <[email protected]>
• Re: st: collapse if at least X or more obs. per group are non-missing
  • From: [email protected]
• st: calculrating confidence Intervals in svyprop statements
  • From: <[email protected]>
• st: RE: How to do percentage analysis
  • From: "Nichols, Austin" <[email protected]>
• st: How to do percentage analysis
  • From: "Maoyong Fan" <[email protected]>
• st: RE: RE: thanks again, more Stata data manipulation tips,
  • From: "Nichols, Austin" <[email protected]>
• Re: st: append multiple data sets
  • From: Devra Golbe <[email protected]>
• st: RE: regression question
  • From: "Nichols, Austin" <[email protected]>
• st: RE: collapse if at least X or more obs. per group are non-missing
  • From: "Nichols, Austin" <[email protected]>
• st: St: store estimates for ADF
  • From: [email protected]
• st: collapse if at least X or more obs. per group are non-missing
  • From: "Jens Hainmueller" <[email protected]>
• st: regression question
  • From: Thomas M�hlmann <[email protected]>
• st: RE: RE: append multiple data sets
  • From: "Nichols, Austin" <[email protected]>
• st: Covariance matrice.
  • From: [email protected]
• st: RE: append multiple data sets
  • From: "David Harrison" <[email protected]>
• st: append multiple data sets
  • From: Leonelo Bautista <[email protected]>
• st: save workspace
  • From: Arnold Kester <[email protected]>
• st: RE: Questions
  • From: "Alvaro Rodriguez" <[email protected]>
• st: RE: VEC models and Johansen Procedure
  • From: "Thuy Le" <[email protected]>
• st: VEC models and Johansen Procedure
  • From: "Christian Wagner" <[email protected]>
• st: vecstable graph ?
  • From: Lars Korsholm <[email protected]>
• RE: st: RE: Nested If / then statement in a Bar Graph
  • From: "David Harrison" <[email protected]>
• Re: st: Questions
  • From: Richard Williams <[email protected]>
• st: Questions
  • From: ya sir <[email protected]>
• Re: st: RE: Nested If / then statement in a Bar Graph
  • From: [email protected]
• [no subject]
  • From: [email protected]
• st: quanitle regressions / bootstrapping
  • From: Hamori <[email protected]>
• Re: st: F-statistics missing from simple OLS regression with robust s.e.
  • From: "Ngo,PT (pgr)" <[email protected]>
• Re: st: RE: Nested If / then statement in a Bar Graph
  • From: "Clive Nicholas" <[email protected]>
• st: RE: Nested If / then statement in a Bar Graph
  • From: "Scott Merryman" <[email protected]>
• RE:st: Part II: An error in the xtabond-description
  • From: "David M. Drukker, StataCorp" <[email protected]>
• st: RE: thanks again, more Stata data manipulation tips, or alternati
  • From: Doug Owens <[email protected]>
• RE:st: Part II: An error in the xtabond-description
  • From: Mark Schaffer <[email protected]>
• st: RE: thanks again, more Stata data manipulation tips, or alternati
  • From: "Owens, Douglas Hamilton" <[email protected]>
• [no subject]
  • From: Unknown
• st: RE: STATA and NHIS data - Elementary Question
  • From: Marisa Wilson <[email protected]>
• st: RE: STATA and NHIS data - Elementary Question
  • From: "Alexander Tsai" <[email protected]>
• RE:st: Part II: An error in the xtabond-description
  • From: Giovanni Bruno <[email protected]>
• st: RE: thanks again, more Stata data manipulation tips, or alternative statistical software?
  • From: "Nichols, Austin" <[email protected]>
• RE:st: Part II: An error in the xtabond-description
  • From: "David M. Drukker, StataCorp" <[email protected]>
• st: STATA and NHIS data - Elementary Question
  • From: Marisa Wilson <[email protected]>
• st: thanks again, more Stata data manipulation tips, or alternative statistical software?
  • From: yumin sheng <[email protected]>
• st: RE: Eq command
  • From: "Barth Riley" <[email protected]>
• st: Nested If / then statement in a Bar Graph
  • From: [email protected]
• Re: st: marginal effects after nlogit and clogit
  • From: "Sascha O. Becker" <[email protected]>
• Re: st: Part II: An error in the xtabond-description
  • From: Giovanni Bruno <[email protected]>
• st: Re: St: Pooled OLS
  • From: "Andrea Molinari" <[email protected]>
• st: St: Pooled OLS
  • From: [email protected]
• Re: st: factor analysis w/ categorical vars. in STATA
  • From: [email protected]
• Re: st: cohen's d for medians
  • From: Ron�n Conroy <[email protected]>
• Re: st: treatreg
  • From: "Mark Schaffer" <[email protected]>
• Re: st: marginal effects after nlogit and clogit
  • From: May Boggess <[email protected]>
• Re: st: factor analysis w/ categorical vars. in STATA
  • From: "Mark Schaffer" <[email protected]>
• st: cohen's d for medians
  • From: "Federico Soldani" <[email protected]>
• st: cohen's d for medians
  • From: "Federico Soldani" <[email protected]>
• st: Part II: An error in the xtabond-description
  • From: TEWODAJ MOGUES <[email protected]>
• st: marginal effects after nlogit and clogit
  • From: "Sascha O. Becker" <[email protected]>
• st: Bootstrap and postfile in Stata 8.2
  • From: Axel Heitmueller <[email protected]>
• st: factor analysis w/ categorical vars. in STATA
  • From: <[email protected]>
• st: poisson regression
  • From: "Ann E Fitzmaurice" <[email protected]>
• Re: st: F-statistics missing from simple OLS regression with robust s.e.
  • From: "Mark Schaffer" <[email protected]>
• st: F-statistics missing from simple OLS regression with robust s.e.
  • From: "Ngo,PT (pgr)" <[email protected]>
• st: Eq command
  • From: "Vartia, Niini" <[email protected]>
• Re: st: Interpting Dichotomous
  • From: Richard Williams <[email protected]>
• Re: st: Interpting Dichotomous
  • From: "Clive Nicholas" <[email protected]>
• Re: st: Dummies representing combinations of dummies, & conserving matsize
  • From: "Clive Nicholas" <[email protected]>
• Re: st: Floating toolbar (Mac OS X)
  • From: "Michael S. Hanson" <[email protected]>
• Re: st: Interpreting Regression
  • From: "Renzo Comolli" <[email protected]>
• st: Interpreting Regression
  • From: Syed O Masood <[email protected]>
• st: Interpting Dichotomous
  • From: Syed O Masood <[email protected]>
• st: Re: generating combinations of dummies
  • From: Christopher F Baum <[email protected]>
• Re: st: selecting obs while reading in huge data set
  • From: "Sascha O. Becker" <[email protected]>
• st: Dummies representing combinations of dummies, & conserving matsize
  • From: CM <[email protected]>
• st: Prcounts command
  • From: "Jose A. Aleman" <[email protected]>
• st: Retaining survivors in survival analysis?
  • From: "James Harris" <[email protected]>
• st: Re: Creating a variable with a Panel Data Set
  • From: "Daniel Egan" <[email protected]>
• RE: st: ivreg2 and panel group heteroscedasticity
  • From: "Jeffry Jacob" <[email protected]>
• Re: st: How to perform Hausman test for random effects specification with survey data
  • From: Mark Schaffer <[email protected]>
• re: st: ivreg2 and panel group heteroscedasticity
  • From: Mark Schaffer <[email protected]>
• Re: st: How to perform Hausman test for random effects specification with survey data
  • From: "James W. Shaw" <[email protected]>
• re: st: ivreg2 and panel group heteroscedasticity
  • From: "Jeffry Jacob" <[email protected]>
• Re: st: Limited Dependent Variable
  • From: "Renzo Comolli" <[email protected]>
• Re: st: Re: graph prediction of transformed variable from regression
  • From: Steve <[email protected]>
• st: Creating a variable with a Panel Data Set
  • From: Ann Hapanowicz <[email protected]>
• Re: st: ivreg2 and panel group heteroscedasticity
  • From: Mark Schaffer <[email protected]>
• RE: st: Re: wmf
  • From: "Guillaume Frechette" <[email protected]>
• st: ivreg2 and panel group heteroscedasticity
  • From: "Jeffry Jacob" <[email protected]>
• st: Transforming numeric to categorical (not to string!)
  • From: TEWODAJ MOGUES <[email protected]>
• st: Error in xtabond-description in the manual
  • From: TEWODAJ MOGUES <[email protected]>
• st: Color Scheme for Kedit
  • From: Dick Campbell <[email protected]>
• st: Re: wmf
  • From: Christopher F Baum <[email protected]>
• st: Pedroni tests for panel cointegration
  • From: "kashif saeed" <[email protected]>
• st: Limited Dependent Variable
  • From: "Apostolos Ballas" <[email protected]>
• st: -outsheet- outputs display rather than true values
  • From: "Deborah Garvey" <[email protected]>
• Re: st: Questions regarding -tvc- and proportional hazards
  • From: [email protected] (Roberto G. Gutierrez, StataCorp)
• st: Graph related suggestion for Stata Corp
  • From: "Guillaume Frechette" <[email protected]>
• Re: st: Floating toolbar (Mac OS X)
  • From: [email protected]
• st: Data manipulation question
  • From: "Hoetker, Glenn" <[email protected]>
• Re: st: data manipulation - generating pairs of a list
  • From: Stas Kolenikov <[email protected]>
• st: Text editors FAQ updated
  • From: "Nick Cox" <[email protected]>
• st: RE: changing the order of graph by?
  • From: "Nick Cox" <[email protected]>
• st: RE: data manipulation - generating pairs of a list
  • From: "Nick Cox" <[email protected]>
• Re: st: Unpublicised -color- command in dialogs
  • From: [email protected] (James Hassell)
• st: New version of -eclplot- on SSC
  • From: Roger Newson <[email protected]>
• st: Re: ancova for repeated designs
  • From: Paul Seed <[email protected]>
• st: Questions regarding -tvc- and proportional hazards
  • From: "Wagner, Joseph" <[email protected]>
• Re: st: Unpublicised -color- command in dialogs
  • From: Roger Newson <[email protected]>
• st: Re: data manipulation
  • From: Christopher F Baum <[email protected]>
• st: Re: estimation results
  • From: Christopher F Baum <[email protected]>
• Re: st: dummy variables with desmat
  • From: John Hendrickx <[email protected]>
• Re: st: data manipulation - generating pairs of a list
  • From: Ichiro Fujikake <[email protected]>
• st: matching script for design of case-control data?
  • From: "Marcus Fischer" <[email protected]>
• st: Simultaneous equations once more
  • From: "Tobias Hofmann" <[email protected]>
• RE: st: RE: generating data sets with specific parameters
  • From: "" <>
• st: RE: Re: generating dataset with specific params
  • From: "" <>
• st: data manipulation - generating pairs of a list
  • From: Mark Manger <[email protected]>
• st: Floating toolbar (Mac OS X)
  • From: "Michael S. Hanson" <[email protected]>
• Re: st: question on GLLAMM
  • From: Stas Kolenikov <[email protected]>
• [no subject]
  • From: Stas Kolenikov <[email protected]>
• st: Hausman-Taylor model
  • From: "Michael Johnson" <[email protected]>
• Re: st: question on GLLAMM
  • From: Michael Ingre <[email protected]>
• Re: st: question on GLLAMM
  • From: Michael Ingre <[email protected]>
• Re: st: selecting obs while reading in huge data set
  • From: Stas Kolenikov <[email protected]>
• Re: st: how to get standard errors from VC
  • From: Stas Kolenikov <[email protected]>
• RE: st: Issue with xtivreg and unbalanced panel
  • From: "Salvati, Jean" <[email protected]>
• st: questions about nl procedure
  • From: Amit Khandelwal <[email protected]>
• st: RE: how to get standard errors from VC
  • From: "Yulia Marchenko" <[email protected]>
• Re: st: Unpublicised -color- command in dialogs
  • From: [email protected] (James Hassell)
• st: how to get standard errors from VC
  • From: Oleksandr Shepotylo <[email protected]>
• Re: st: changing the order of graph by?
  • From: Roger Newson <[email protected]>
• Re: st: how can i add a new raw to a stata data ?
  • From: "Dev Vencappa" <[email protected]>
• Re: st: how can i add a new raw to a stata data ?
  • From: "Dev Vencappa" <[email protected]>
• st: how can i add a new raw to a stata data ?
  • From: "Levy Lee" <[email protected]>
• Re: st: How to perform Hausman test for random effects specification with survey data
  • From: "James W. Shaw" <[email protected]>
• st: changing the order of graph by?
  • From: "Jannik Helweg-Larsen" <[email protected]>
• RE: st: RE: RE: RE: Seasonal adjustment?
  • From: "Thuy Le" <[email protected]>
• Re: st: question on GLLAMM
  • From: lm0542 <[email protected]>
• RE: st: selecting obs while reading in huge data set
  • From: "Hoetker, Glenn" <[email protected]>
• Re: st: RE: generating data sets with specific parameters
  • From: Richard Williams <[email protected]>
• Re: st: RE: RE: RE: Seasonal adjustment?
  • From: "Stanislav Kolenikov" <[email protected]>
• Re: st: question on GLLAMM
  • From: "Stanislav Kolenikov" <[email protected]>
• st: dummy variables with desmat
  • From: Tim Wade <[email protected]>
• RE: st: collapse (sum) versus egen (sum)
  • From: [email protected]
• st: RE: RE: RE: Seasonal adjustment?
  • From: "Ky Tran" <[email protected]>
• Re: st: collapse (sum) versus egen (sum)
  • From: Dan Blanchette <[email protected]>
• st: Re: selecting obs while reading in huge data set
  • From: Joseph Coveney <[email protected]>
• Re: st: selecting obs while reading in huge data set
  • From: Michael Ingre <[email protected]>
• Re: st: Re: graph prediction of transformed variable from regression
  • From: "Neil Shephard" <[email protected]>
• RE: st: selecting obs while reading in huge data set
  • From: "Steve Stillman" <[email protected]>
• Re: st: question on GLLAMM
  • From: Michael Ingre <[email protected]>
• st: Re: graph prediction of transformed variable from regression
  • From: Steve <[email protected]>
• st: number of decimals in output
  • From: "Geerdsen Lars P" <[email protected]>
• st: Unpublicised -color- command in dialogs
  • From: Roger Newson <[email protected]>
• st: treatreg
  • From: "Kjerstad Egil (SNF)" <[email protected]>
• st: RE: RE: Seasonal adjustment?
  • From: samani Lamabadusuriya <[email protected]>
• Re: st: Issue with xtivreg and unbalanced panel
  • From: [email protected]
• st: collapse (sum) versus egen (sum)
  • From: [email protected]
• st: ANZ Stata Users meeting
  • From: Philip Ryan <[email protected]>
• Re: st: selecting obs while reading in huge data set
  • From: "Sascha O. Becker" <[email protected]>
• st: Re: generating data sets with specific parameters
  • From: Joseph Coveney <[email protected]>
• st: Re: generating dataset with specific params
  • From: Christopher F Baum <[email protected]>
• st: RE: generating data sets with specific parameters
  • From: "Scott Merryman" <[email protected]>
• RE: st: Xtabond2 versus xtabond
  • From: "Yontcheva, Boriana" <[email protected]>
• st: RE: Seasonal adjustment?
  • From: "Ky Tran" <[email protected]>
• Re: st: How to perform Hausman test for random effects specification with survey data
  • From: Mark Schaffer <[email protected]>
• st: generating data sets with specific parameters
  • From: "" <>
• RE: st: Seasonal adjustment?
  • From: "Michael Johnson" <[email protected]>
• st: Seasonal adjustment?
  • From: "Michael S. Hanson" <[email protected]>
• Re: st: Ivreg2 & -bw- option
  • From: Mark Schaffer <[email protected]>
• st: New version of -parmest- on SSC
  • From: Roger Newson <[email protected]>
• Re: st: New program: NDBCI
  • From: Fred Wolfe <[email protected]>
• st: New program: NDBCI
  • From: Fred Wolfe <[email protected]>
• st: Issue with xtivreg and unbalanced panel
  • From: "Salvati, Jean" <[email protected]>
• st: Ivreg2 & -bw- option
  • From: Cordula Stolberg <[email protected]>
• RE: st: Xtabond2 versus xtabond
  • From: "Salvati, Jean" <[email protected]>
• Fwd: st: 2SLS and eivreg
  • From: Henrik Andersson <[email protected]>
• st: 2SLS and eivreg
  • From: Henrik Andersson <[email protected]>
• st: How to perform Hausman test for random effects specification with survey data
  • From: "James W. Shaw" <[email protected]>
• Re: st: selecting obs while reading in huge data set
  • From: Daniel Feenberg <[email protected]>
• st: question on GLLAMM
  • From: lm0542 <[email protected]>
• [no subject]
  • From: Unknown
• Re:st: Xtabond2 versus xtabond
  • From: "sistoand80" <[email protected]>
• st: selecting obs while reading in huge data set
  • From: "Sascha O. Becker" <[email protected]>
• Re: st: making a matched data set
  • From: "ctx705518" <[email protected]>
• st: Re: insheet/replace with panel data
  • From: Christopher F Baum <[email protected]>
• Re: st: Re: stata question
  • From: "Mark Schaffer" <[email protected]>
• Re: st: RE: making a matched data set
  • From: Edwin Leuven <[email protected]>
• st: reproducibility using hotdeck with seed option
  • From: Justin Trogdon <[email protected]>
• Re: st: Ordered logit with time variance
  • From: Michael Ingre <[email protected]>
• st: RE: making a matched data set
  • From: "Scott Merryman" <[email protected]>
• Re: st: Tabodds with multiple explanatory variables
  • From: Philip Ryan <[email protected]>
• st: making a matched data set
  • From: [email protected]
• st: RE: global variable in a loop
  • From: "Nichols, Austin" <[email protected]>
• st: global variable in a loop
  • From: Amit Khandelwal <[email protected]>
• st: Tabodds with multiple explanatory variables
  • From: "Hulley, Benjamin (NIH/NCI)" <[email protected]>
• Re: st: Bootstraped nadirs with 95% CI's for frac poly approximations
  • From: Stas Kolenikov <[email protected]>
• st: insheet/replace with panel data: best practices?
  • From: "Michael S. Hanson" <[email protected]>
• Re: st: Looking for Box-Cox transformation for a quantile of dependent variable
  • From: <[email protected]>
• st: RE: postgr3 graph options
  • From: "Mitchell, Michael" <[email protected]>
• Re: st: Re: stata question
  • From: Cordula Stolberg <[email protected]>
• st: Bootstraped nadirs with 95% CI's for frac poly approximations
  • From: Jim Nicholson <[email protected]>
• st: Re: stata question
  • From: Kit Baum <[email protected]>
• re: RE: st: RE: xi3 & postgr3 graph options
  • From: David Airey <[email protected]>
• st: vecrank
  • From: [email protected]
• RE: st: RE: xi3 & postgr3 graph options
  • From: "Nick Cox" <[email protected]>
• re: st: RE: xi3 & postgr3 graph options
  • From: David Airey <[email protected]>
• st: Ordered logit with time variance
  • From: "Ralph Setzer" <[email protected]>
• st: RE: xi3 & postgr3 graph options
  • From: "Nick Cox" <[email protected]>
• st: xi3 & postgr3 graph options
  • From: David Airey <[email protected]>
• st: Looking for Box-Cox transformation for a quantile of dependent variable
  • From: Bo MacInnis <[email protected]>
• Re: st: Re: Stata Output to Tex
  • From: Fredrik Wallenberg <[email protected]>
• st: collinearity diagnostics for categorical and non-regression models
  • From: John Hendrickx <[email protected]>
• st: updates on SSC
  • From: "Nick Cox" <[email protected]>
• Re: st: Re: Stata Code for arma processes
  • From: "Clive Nicholas" <[email protected]>
• Re: st: Stata Output to Tex
  • From: "Michael S. Hanson" <[email protected]>
• st: xttest2
  • From: Kit Baum <[email protected]>
• Re: st: Windows XP SP2 Update & Stata
  • From: [email protected] (Alan Riley)
• st: bootstraping bysort results
  • From: samirkc <[email protected]>
• Re: st: outreg question
  • From: "Renzo Comolli" <[email protected]>
• Re: st: Stata Output to Tex
  • From: Roger Newson <[email protected]>
• RE: st: Stata Output to Tex
  • From: "Nick Cox" <[email protected]>
• Re: st: Stata Output to Tex
  • From: "Stanislav Kolenikov" <[email protected]>
• st: Windows XP SP2 Update & Stata
  • From: "Reza Daniels" <[email protected]>
• Re: st: missingness in a large, complex sampling deign
  • From: "Stanislav Kolenikov" <[email protected]>
• st: Re: Stata Output to Tex
  • From: Friedrich Huebler <[email protected]>
• st: Re: Is there 'xt' command when the outcome variable is orderd choice?
  • From: "Stanislav Kolenikov" <[email protected]>
• st: outreg question
  • From: [email protected]
• st: matin4-matout4
  • From: Kit Baum <[email protected]>
• st: Stata Output to Tex
  • From: Amit Khandelwal <[email protected]>
• Re: st: random effects logit instrumental variables
  • From: Roger Harbord <[email protected]>
• st: RE: missingness in a large, complex sampling deign
  • From: "Katrina Walsemann" <[email protected]>
• st: Re: ancova for repeated designs
  • From: Joseph Coveney <[email protected]>
• st: RE: Re: Stata Code for arma processes
  • From: "Nick Cox" <[email protected]>
• st: Re: Stata Code for arma processes
  • From: Kit Baum <[email protected]>
• st: saving and loading matrices
  • From: Kit Baum <[email protected]>
• st: Re: Re: weight and aggregate
  • From: "Hoang Thanh Huong(Yahoo)" <[email protected]>
• st: RE: graph oneway
  • From: "Nick Cox" <[email protected]>
• Re: st: graph oneway
  • From: "Neil Shephard" <[email protected]>
• st: graph oneway
  • From: Agnes Nocon <[email protected]>
• st: please read Statalist FAQ _before_ posting
  • From: "Nick Cox" <[email protected]>
• st: RE: weight and aggregate
  • From: "Nick Cox" <[email protected]>
• st: Re: weight and aggregate
  • From: "R.E. De Hoyos" <[email protected]>
• st: weight and aggregate
  • From: "Hoang Thanh Huong(Yahoo)" <[email protected]>
• st: RE: discriminatory ability between typing systems
  • From: "Nick Cox" <[email protected]>
• Re: st: saving and loading matrices
  • From: Roger Newson <[email protected]>
• st: RE: Linear Progamming in Stata
  • From: "Nick Cox" <[email protected]>
• st: Linear Progamming in Stata
  • From: Nghiem Hong Son <[email protected]>
• st: discriminatory ability between typing systems
  • From: "Remi" <[email protected]>
• st: agreement between several raters giving each two jugements
  • From: "Remi" <[email protected]>
• st: agreement between several raters giving each two jugements
  • From: "Remi" <[email protected]>
• st: discriminatory ability between typing systems
  • From: "Remi" <[email protected]>
• st: RE: missingness in a large, complex sampling deign
  • From: "Reza Daniels" <[email protected]>
• RE: st: Re: ancova for repeated designs
  • From: tmmanini <[email protected]>
• st: date translation
  • From: "cui liwei" <[email protected]>
• st: Re: ancova for repeated designs
  • From: Joseph Coveney <[email protected]>
• st: xt and simultaneous equations
  • From: "Tobias Hofmann" <[email protected]>
• st: missingness in a large, complex sampling deign
  • From: "Colleen Daly Martinez" <[email protected]>
• st: error autocorrelations in SURE models
  • From: "Naccache Sonia" <[email protected]>
• st: saving and loading matrices
  • From: Oleksandr Shepotylo <[email protected]>
• re: st: Re: ancova for repeated designs
  • From: David Airey <[email protected]>
• RE: st: I am new in the list, (doubts on Xtabond)
  • From: "Lopez Noria, Gabriela" <[email protected]>
• Re: st: Requested change for -ci-
  • From: Fred Wolfe <[email protected]>
• st: Re: Is there 'xt' command when the outcome variable is orderd choice?
  • From: Tesfayi Gebre <[email protected]>
• st: Re: ancova for repeated designs
  • From: Joseph Coveney <[email protected]>
• re: st: ancova for repeated designs
  • From: David Airey <[email protected]>
• st: ancova for repeated designs
  • From: tmmanini <[email protected]>
• st: conditional logit with constraint?
  • From: =?big5?q?diwan=5Fdmwang?= <[email protected]>
• st: RE: variable not found/bootstrapping
  • From: "Nick Cox" <[email protected]>
• Re: st: data manipulation help
  • From: "Nick Cox" <[email protected]>
• st: Re: lags and leads
  • From: Christopher F Baum <[email protected]>
• st: Requested change for -ci-
  • From: Fred Wolfe <[email protected]>
• Re: st: Re: export data
  • From: Philip Ryan <[email protected]>
• Re: st:panel data manipulation
  • From: caglar <[email protected]>
• Re: st:panel data manipulation
  • From: "Michael S. Hanson" <[email protected]>
• Re:st:panel data manipulation
  • From: caglar <[email protected]>
• Re: st: Insheeting from an irregularly-dated panel?
  • From: "Michael S. Hanson" <[email protected]>
• Re: st: dropped in regression analysis
  • From: Toyoto Iwata <[email protected]>
• Re: st: dropped in regression analysis
  • From: "Clive Nicholas" <[email protected]>
• Re: st: panel data manipulation
  • From: "Clive Nicholas" <[email protected]>
• st: unordered multinominal logit and timse series cross section
  • From: "Takayuki Sakamoto" <[email protected]>
• st: panel data manipulation
  • From: caglar <[email protected]>
• Re: st: variable not found/bootstrapping
  • From: "Thomas W BRUNDAGE" <[email protected]>
• st: variable not found/bootstrapping
  • From: Heather Gold <[email protected]>
• Re: st: Insheeting from an irregularly-dated panel?
  • From: Richard J Stoll <[email protected]>
• st: Insheeting from an irregularly-dated panel?
  • From: "Michael S. Hanson" <[email protected]>
• st: Announcing floattolong; also, update to carryforward
  • From: David Kantor <[email protected]>
• st: Xtabond2 versus xtabond
  • From: "Yontcheva, Boriana" <[email protected]>
• st: Re: export data
  • From: "R.E. De Hoyos" <[email protected]>
• st: RE: Scatter plot: Getting read of the x title and the numbers behind
  • From: "Nick Cox" <[email protected]>
• st: Scatter plot: Getting read of the x title and the numbers behind the x labels
  • From: "Cohn, Sylvia E." <[email protected]>
• RE: st: Transforming numeric to categorical (not to string!)
  • From: "Nick Cox" <[email protected]>
• RE: st: Transforming numeric to categorical (not to string!)
  • From: TEWODAJ MOGUES <[email protected]>
• st: Re: Stata Helpp File 'Levinlin'
  • From: Christopher F Baum <[email protected]>
• st: export data
  • From: Pedro Juan Garc�a Teruel <[email protected]>
• st: AW: Re: RE: working out data structure
  • From: "Armen Khachatryan" <[email protected]>
• st: Re: RE: working out data structure
  • From: "R.E. De Hoyos" <[email protected]>
• st: Re: no observations
  • From: Christopher F Baum <[email protected]>
• st: RE: working out data structure
  • From: "Nick Cox" <[email protected]>
• st: working out data structure
  • From: "Armen Khachatryan" <[email protected]>
• Re: st: Error message: input too long; after lab def
  • From: Fred Wolfe <[email protected]>
• st: Error message: input too long; after lab def
  • From: Tobias Hubert <[email protected]>
• Re: st: ivreg2 endogeneity test
  • From: Cordula Stolberg <[email protected]>
• Re: st: data manipulation help
  • From: Toyoto Iwata <[email protected]>
• Re: st: data manipulation help
  • From: Toyoto Iwata <[email protected]>
• Re: st: data manipulation help
  • From: yumin sheng <[email protected]>
• Re: st: data manipulation help
  • From: "Dev Vencappa" <[email protected]>
• st: data manipulation help
  • From: yumin sheng <[email protected]>
• st: Stata SE OS X printing from do file editor loses the last page?
  • From: David Airey <[email protected]>
• Re: st: RE: St: No observations error message
  • From: [email protected]
• st: RE: St: No observations error message
  • From: "Nick Cox" <[email protected]>
• st: no obs
  • From: Kit Baum <[email protected]>
• st: RE: gen vars from ci or cii commands
  • From: "Nick Cox" <[email protected]>
• st: ivreg2 endogeneity test
  • From: Kit Baum <[email protected]>
• st: gen vars from ci or cii commands
  • From: "Douglas Crawford" <[email protected]>
• st: St: No observations error message
  • From: [email protected]
• [no subject]
  • From: Unknown
• Re: st: dropped in regression analysis
  • From: "Clive Nicholas" <[email protected]>
• st: dropped in regression analysis
  • From: samirkc <[email protected]>
• st: Endogeneity test with ivreg2
  • From: Cordula Stolberg <[email protected]>
• st: Re: mvsumm with missing obs
  • From: Christopher F Baum <[email protected]>
• Re: st: Re: xtlogit and logistic-cluster (REVISED)
  • From: Ricardo Ovaldia <[email protected]>
• st: -onewayplot- update on SSC
  • From: "Nick Cox" <[email protected]>
• st: RE: Rescaling
  • From: "Nick Cox" <[email protected]>
• st: RE: Syntax colouring (was Multiple Condition Statement)
  • From: "Nick Cox" <[email protected]>
• Re: st: Rescaling
  • From: Daniel Feenberg <[email protected]>
• Re: st: generate if [exp], otherwise
  • From: Ron�n Conroy <[email protected]>
• st: Syntax colouring (was Multiple Condition Statement)
  • From: Ron�n Conroy <[email protected]>
• RE: st: Transforming numeric to categorical (not to string!)
  • From: "Nick Cox" <[email protected]>
• st: Rescaling
  • From: Cordula Stolberg <[email protected]>
• Re: st: generate if [exp], otherwise
  • From: "Mark Clatworthy" <[email protected]>
• st: RE: generate if [exp], otherwise
  • From: "David Harrison" <[email protected]>
• Re: st: generate if [exp], otherwise
  • From: Chris Wallace <[email protected]>
• Re: st: generate if [exp], otherwise
  • From: Chris Wallace <[email protected]>
• st: Unit root tests for unbalanced data panels in Stata
  • From: "Gindo Tampubolon" <[email protected]>
• [no subject]
  • From: Unknown
• st: generate if [exp], otherwise
  • From: "Mark Clatworthy" <[email protected]>
• st: Annie M McNeill/PharmRD/GSK is out of the office.
  • From: [email protected]
• Re: st: RE: Multiple condition statement
  • From: Philip Ryan <[email protected]>
• Re: st: RE: Multiple condition statement
  • From: Hannah Moore <[email protected]>
• st: heckprobit and se(rho)
  • From: "Pema, Elda ALB" <[email protected]>
• st: Another question about bootstrap
  • From: "S.Rahardja" <[email protected]>
• Re: st: Transforming numeric to categorical (not to string!)
  • From: "Clive Nicholas" <[email protected]>
• Re: st: Transforming numeric to categorical (not to string!) variables
  • From: TEWODAJ MOGUES <[email protected]>
• st: Re: Unit root tests for unbalanced data panels in Stata
  • From: Kit Baum <[email protected]>
• Re: st: I am new in the list, (doubts on Xtabond)
  • From: "Clive Nicholas" <[email protected]>
• st: RE: mvsumm and missing observations (part 2)
  • From: "Nick Cox" <[email protected]>
• st: mvsumm and missing observations (part 2)
  • From: [email protected]
• st: RE: decimal points in LaTeX tables
  • From: "Nick Cox" <[email protected]>
• st: decimal points in LaTeX tables
  • From: "Rainald Borck" <[email protected]>
• RE: st: RE: Macro questions. (Again).
  • From: [email protected]
• st: I am new in the list, (doubts on Xtabond)
  • From: "Lopez Noria, Gabriela" <[email protected]>
• RE: st: RE: Macro questions. (Again).
  • From: "Nick Cox" <[email protected]>
• RE: st: RE: Macro questions. (Again).
  • From: "Nick Cox" <[email protected]>
• Re: st: RE: Macro questions. (Again).
  • From: David Kantor <[email protected]>
• Re: st: RE: Macro questions. (Again).
  • From: Ulrich Kohler <[email protected]>
• Re: st: RE: Macro questions. (Again).
  • From: [email protected]
• Re: st: Help
  • From: Cordula Stolberg <[email protected]>
• Re: st: Panel Cointegration
  • From: Ian Sue Wing <[email protected]>
• st: Re: margfx
  • From: jean ries <[email protected]>
• st: Re: Help
  • From: "R.E. De Hoyos" <[email protected]>
• st: Help
  • From: Netra Chhetri <[email protected]>
• st: Re: margfx
  • From: Christopher F Baum <[email protected]>
• st: RE: RE: Multiple condition statement
  • From: "Nick Cox" <[email protected]>
• st: RE: Multiple condition statement
  • From: "Nick Cox" <[email protected]>
• st: Muliple condition statement
  • From: Hannah Moore <[email protected]>
• st: -mrtab- updated on SSC
  • From: "Jann, Ben" <[email protected]>
• st: -estout- updated on SSC
  • From: "Jann, Ben" <[email protected]>
• Re: st: outreg after mfx
  • From: Fredrik Wallenberg <[email protected]>
• Re: st: Using -bitest- in the same way as -prtest varname, by(groupvar)-
  • From: Richard Williams <[email protected]>
• st: outreg after mfx
  • From: "Pema, Elda ALB" <[email protected]>
• Re: st: margfx?
  • From: "Clive Nicholas" <[email protected]>
• st: Using -bitest- in the same way as -prtest varname, by(groupvar)-
  • From: "Renzo Comolli" <[email protected]>
• Re: st: A question about bootstrap
  • From: Stas Kolenikov <[email protected]>
• Re: st: margfx?
  • From: "Dimitriy V. Masterov" <[email protected]>
• Re: st: Transforming numeric to categorical (not to string!)
  • From: Philip Ryan <[email protected]>
• st: margfx?
  • From: Christopher F Baum <[email protected]>
• st: margfx puzzle
  • From: "Dimitriy V. Masterov" <[email protected]>
• Re: st: Transforming numeric to categorical (not to string!)
  • From: "Clive Nicholas" <[email protected]>
• st: Transforming numeric to categorical (not to string!) variables
  • From: TEWODAJ MOGUES <[email protected]>
• Re: st: RE: Macro questions.
  • From: [email protected]
• st: How to rename variables by adding a suffix
  • From: TEWODAJ MOGUES <[email protected]>
• st: RE: Macro questions.
  • From: "Nick Cox" <[email protected]>
• st: Macro questions.
  • From: [email protected]
• Re: st: Autocorrelation and heteroskedasticity in panel models
  • From: "Clive Nicholas" <[email protected]>
• st: Re: RE: Geometric Standard Distribution
  • From: Weiwei Du <[email protected]>
• st: RE: Geometric Standard Distribution
  • From: "Nick Cox" <[email protected]>
• st: matsize & single exogeneity & autocorrel. in panel
  • From: "vukasinm" <[email protected]>
• st: RE: Panel Cointegration
  • From: "Gustavo Sanchez" <[email protected]>
• st: RE: Geometric Standard Distribution
  • From: "Nick Cox" <[email protected]>
• st: RE: Panel Cointegration
  • From: "Nick Cox" <[email protected]>
• st: Panel Cointegration
  • From: [email protected]
• st: Geometric Standard Distribution
  • From: Weiwei Du <[email protected]>
• st: Fixed effects model with time dummies and other variations
  • From: "Pi, Ron" <[email protected]>
• st: RE: How to estimate the sum of two estimators
  • From: "Yulia Marchenko" <[email protected]>
• st: Re: mvsumm and missing obs
  • From: Kit Baum <[email protected]>
• st: RE: mvsumm and missing obs
  • From: "Nick Cox" <[email protected]>
• st: How to estimate the sum of two estimators
  • From: =?ks_c_5601-1987?B?sejH9sG+?= <[email protected]>
• st: mvsumm and missing obs
  • From: [email protected]
• Re: st: A question about bootstrap
  • From: "Alfonso Miranda Caso Luengo" <[email protected]>
• Re: st: A question about bootstrap
  • From: "Alfonso Miranda Caso Luengo" <[email protected]>
• st: RE: Q1 graphs notes command and Q2 the stata trademark
  • From: "Nick Cox" <[email protected]>
• st: Q1 graphs notes command and Q2 the stata trademark
  • From: "" <>
• Re: st: A question about bootstrap
  • From: "Alfonso Miranda Caso Luengo" <[email protected]>
• st: RE: Dealing with string variables
  • From: "Nick Cox" <[email protected]>
• st: A question about bootstrap
  • From: Tak Wai Chau <[email protected]>
• st: RE: beta-binomial regression, ebb.ado
  • From: "FEIVESON, ALAN H. (AL) (JSC-SK) (NASA)" <[email protected]>
• [no subject]
  • From: Unknown
• Re: st: Autocorrelation and heteroskedasticity in panel models
  • From: "carambas" <[email protected]>
• Re: st: age adjusting complex sample survey data
  • From: Suzy <[email protected]>
• st: Dealing with string variables
  • From: "Banya, Winston A S" <[email protected]>
• st: Re: quietly opsys
  • From: Christopher F Baum <[email protected]>
• st: RE: RE:xtpcse vs. xtpcse, noconstant
  • From: "Nick Cox" <[email protected]>
• RE: st: looping across an unknown number of columns
  • From: "Nick Cox" <[email protected]>
• Re: st: looping across an unknown number of columns
  • From: Jason Rachlin <[email protected]>
• st: looping across an unknown number of columns
  • From: Jason Rachlin <[email protected]>
• st: RE:xtpcse vs. xtpcse, noconstant
  • From: "carambas" <[email protected]>
• RE: st: while vs. forvalues
  • From: "Nick Cox" <[email protected]>
• Re: st: RE: Rescaling
  • From: Cordula Stolberg <[email protected]>
• Re: st: RE: Rescaling
  • From: Cordula Stolberg <[email protected]>
• Re: st: while vs. forvalues
  • From: Stas Kolenikov <[email protected]>
• st: Which command gives a better estimation: xtgls or areg with cluster option?
  • From: "Khawaja, Abdullahalmamun" <[email protected]>
• st: JSM is on
  • From: Stas Kolenikov <[email protected]>
• st: Reporting Gamma Regression
  • From: "Stephen Soldz" <[email protected]>
• st: 2nd Try: Conflicting Brant Test Results in OLM
  • From: [email protected]
• st: beta-binomial regression, ebb.ado
  • From: Keith Dear <[email protected]>
• st: age adjusting complex sample survey data
  • From: "Thomas Torok" <[email protected]>
• st: The SAS macro savastata on SSC has been updated.
  • From: Dan Blanchette <[email protected]>
• st: various updates on SSC
  • From: "Nick Cox" <[email protected]>
• RE: st: RE: Rescaling
  • From: "Nick Cox" <[email protected]>
• Re: st: RE: Rescaling
  • From: Roger Newson <[email protected]>
• Re: st: RE: Rescaling
  • From: Roger Newson <[email protected]>
• st: RE: RE: comparing mean
  • From: "Nick Cox" <[email protected]>
• st: RE: Rescaling
  • From: "Nick Cox" <[email protected]>
• Re: st: Rescaling
  • From: Matt Dobra <[email protected]>
• Re: st: Re: Reporting Gamma Regression
  • From: Roger Newson <[email protected]>
• st: Re: Reporting Gamma Regression
  • From: Joseph Coveney <[email protected]>
• st: RE: comparing mean
  • From: "Yulia Marchenko" <[email protected]>
• st: Rescaling
  • From: Cordula Stolberg <[email protected]>
• st: Thank you for your help - New to Stata -Beginners books
  • From: samani Lamabadusuriya <[email protected]>
• st: RE: graph, note(""): mask a " | italics
  • From: "David Harrison" <[email protected]>
• st: RE: respecting -quietly- on shell calls
  • From: "Nick Cox" <[email protected]>
• st: RE: graph, note(""): mask a " | italics
  • From: "Nick Cox" <[email protected]>
• st: respecting -quietly- on shell calls
  • From: Mark Holmes <[email protected]>
• st: sorry for sending html - mail
  • From: "BBS Querschnittsprojekt: Gerhard Sch�n" <[email protected]>
• st: Question about code for survival model using fixed effects partial likelihood
  • From: "Jordan Siegel" <[email protected]>
• st: graph, note(""): mask a " | italics
  • From: "BBS Querschnittsprojekt: Gerhard Sch�n" <[email protected]>
• st: comparing mean
  • From: samirkc <[email protected]>
• Re: st: New to Stata -Beginners books
  • From: Roger Newson <[email protected]>
• RE: st: RE: multiple responses to a survey question
  • From: peter harper <[email protected]>
• st: random effects logit instrumental variables
  • From: [email protected]
• st: Re:New to Stata -Beginners books
  • From: jean ries <[email protected]>
• Re: st: Autocorrelation and IV in Panel data
  • From: Christopher Grigoriou <[email protected]>
• st: AW: New to Stata -Beginners books
  • From: "Sebastian.Baumeister" <[email protected]>
• st: New to Stata -Beginners books
  • From: samani Lamabadusuriya <[email protected]>
• st: RE: AW: New to Stata -Beginners books
  • From: "Nick Cox" <[email protected]>
• RE: st: RE: multiple responses to a survey question
  • From: "Nick Cox" <[email protected]>
• Re: st: RE: multiple responses to a survey question
  • From: peter harper <[email protected]>
• Re: st: Autocorrelation and IV in Panel data
  • From: Cordula Stolberg <[email protected]>
• st: Re: xtlogit and logistic-cluster (REVISED)
  • From: Joseph Coveney <[email protected]>
• Re: st: Mac OS X text editor with Stata syntax
  • From: Ron�n Conroy <[email protected]>
• st: Mac OS X text editor with Stata syntax
  • From: Ron�n Conroy <[email protected]>
• Re: st: Hausman test
  • From: "Andrea Molinari" <[email protected]>
• st: Autocorrelation and IV in Panel data
  • From: "kashif saeed" <[email protected]>
• st: RE: xtpcse vs. xtpcse, noconstant
  • From: "Nick Cox" <[email protected]>
• st: Questions about gllamm
  • From: barthr <[email protected]>
• Re: st: Re: xtlogit and logistic-cluster (REVISED)
  • From: Ricardo Ovaldia <[email protected]>
• Re: st: Hausman test
  • From: "Mark Schaffer" <[email protected]>
• Re: st: The Sargan test in -xtabond(2)-
  • From: "Mark Schaffer" <[email protected]>
• st: xtpcse vs. xtpcse, noconstant
  • From: "carambas" <[email protected]>
• re: st: Re: xtlogit and logistic-cluster (REVISED)
  • From: David Airey <[email protected]>
• st: gllamm
  • From: "Glance, Laurent" <[email protected]>
• RE: st: Adding new variables to an existing global macrolistof variables.
  • From: "Dev Vencappa" <[email protected]>
• st: RE: xtlogit
  • From: "Glance, Laurent" <[email protected]>
• st: Re: xtlogit and logistic-cluster (REVISED)
  • From: Joseph Coveney <[email protected]>
• st: Re: xtlogit
  • From: Joseph Coveney <[email protected]>
• st: xtlogit
  • From: "Glance, Laurent" <[email protected]>
• Re: st: Multicollinearity
  • From: Cordula Stolberg <[email protected]>
• st: Re: Stata's complex sampling - how deep does complex sampleanalysis have to go?
  • From: "Arnold Levinson" <[email protected]>
• re: re: st: Re: xtlogit and logistic-cluster (REVISED)
  • From: David Airey <[email protected]>
• st: Reporting Gamma Regression
  • From: "Stephen Soldz" <[email protected]>
• st: RE: while vs. forvalues
  • From: "Nick Cox" <[email protected]>
• st: RE: twoway by_option subtitle formatting
  • From: "Nick Cox" <[email protected]>
• st: twoway by_option subtitle formatting
  • From: Roger Harbord <[email protected]>
• RE: st: halton sequence
  • From: "Alfonso Miranda Caso Luengo" <[email protected]>
• st: Yahoo! Auto Response
  • From: [email protected]
• st: while vs. forvalues
  • From: "Michael S. Hanson" <[email protected]>
• Re: st: Multicollinearity
  • From: "Clive Nicholas" <[email protected]>
• st: 32 bit and 64 bit Stata
  • From: "Shige Song" <[email protected]>
• st: RE: Re: Imposing Parameter Restriction
  • From: Hyeok Jeong <[email protected]>
• st: New package -cochran- on SSC
  • From: "Jann, Ben" <[email protected]>
• RE: st: halton sequence
  • From: "Nick Cox" <[email protected]>
• Re: st: halton sequence
  • From: Daniel Feenberg <[email protected]>
• Re: st: halton sequence
  • From: "Alfonso Miranda Caso Luengo" <[email protected]>
• RE: st: halton sequence
  • From: "Nick Cox" <[email protected]>
• RE: st: Adding new variables to an existing global macro listof variables.
  • From: "Nick Cox" <[email protected]>
• RE: st: Adding new variables to an existing global macro listof variables.
  • From: "Nick Cox" <[email protected]>
• re: st: Re: xtlogit and logistic-cluster (REVISED)
  • From: Ricardo Ovaldia <[email protected]>
• Re: st: Adding new variables to an existing global macro listof variables.
  • From: "Dev Vencappa" <[email protected]>
• Re: st: Mean pooled panel data estimation
  • From: David Harless <[email protected]>
• st: Re: statalist-digest V4 #1693
  • From: "Carlos Elordi" <[email protected]>
• Re: st: Mean pooled panel data estimation
  • From: Andrea Molinari <[email protected]>
• st: halton sequence
  • From: "Alfonso Miranda Caso Luengo" <[email protected]>
• RE: st: How to rename variables by adding a suffix
  • From: "Nick Cox" <[email protected]>
• Re: st: How to rename variables by adding a suffix
  • From: [email protected]
• st: Multicollinearity
  • From: Cordula Stolberg <[email protected]>
• st: updates on SSC: text editors FAQ and -triplot-
  • From: "Nick Cox" <[email protected]>
• st: RE: Text editors FAQ uopdate please
  • From: "Nick Cox" <[email protected]>
• Re: st: How to rename variables by adding a suffix
  • From: Ron�n Conroy <[email protected]>
• RE: st: How to rename variables by adding a suffix
  • From: "Nick Cox" <[email protected]>
• RE: st: How to rename variables by adding a suffix
  • From: "Nick Cox" <[email protected]>
• Re: st: How to rename variables by adding a suffix
  • From: Buzz Burhans <[email protected]>
• st: cluster option in qreg
  • From: "Norma Coe" <[email protected]>
• st: Mean pooled panel data estimation
  • From: "Petar Balachev" <[email protected]>
• Re: st: How to rename variables by adding a suffix
  • From: Bill Rising <[email protected]>
• st: How to rename variables by adding a suffix
  • From: TEWODAJ MOGUES <[email protected]>
• st: Stata's complex sampling - how deep does complex sampleanalysishave to go?
  • From: Suzy <[email protected]>
• st: RE: Re: Imposing Parameter Restriction
  • From: "FEIVESON, ALAN H. (AL) (JSC-SK) (NASA)" <[email protected]>
• st: Re: Stata query
  • From: Christopher F Baum <[email protected]>
• Re: st: ivreg2
  • From: Cordula Stolberg <[email protected]>
• RE: st: -estout- updated on SSC
  • From: "Clive Nicholas" <[email protected]>
• st: Re: Imposing Parameter Restriction
  • From: Joseph Coveney <[email protected]>
• Re: st: Imposing Parameter Restriction
  • From: Hung-Jen Wang <[email protected]>
• st: Imposing Parameter Restriction
  • From: Hyeok Jeong <[email protected]>
• RE: st: -estout- updated on SSC
  • From: "Jann, Ben" <[email protected]>
• st: RE: help
  • From: "Gustavo Sanchez" <[email protected]>
• [no subject]
  • From: Unknown
• st: Stata's complex sampling - how deep does complex sampleanalysis have to go?
  • From: "Thomas W BRUNDAGE" <[email protected]>
• Re: st: ivreg2
  • From: "Clive Nicholas" <[email protected]>
• RE: st: -estout- updated on SSC
  • From: "Clive Nicholas" <[email protected]>
• RE: st: RE: log files
  • From: "Nick Cox" <[email protected]>
• st: complicated nonlinear least sqaures problem
  • From: Amit Khandelwal <[email protected]>
• st: Mime-Version: 1.0
  • From: Amit Khandelwal <[email protected]>
• st: WLS
  • From: "Antonio Rodrigues Andres" <[email protected]>
• Re: st: RE: log files
  • From: "Michael S. Hanson" <[email protected]>
• Re: st: Old Manuals Question
  • From: Heather Gold <[email protected]>
• st: RE: log files
  • From: "Nick Cox" <[email protected]>
• st: help
  • From: "tanghongyang" <[email protected]>
• Re: st:normal linear (mis)scaling
  • From: "D.Christodoulou" <[email protected]>
• st: shared frality model
  • From: Yuying Tong <[email protected]>
• st: re: [accessing globals after a program]
  • From: "Nick Cox" <[email protected]>
• st: re: Stata query
  • From: "Owens, Douglas Hamilton" <[email protected]>
• RE: st:normal linear (mis)scaling
  • From: "Nick Cox" <[email protected]>
• RE: st:normal linear (mis)scaling
  • From: "Nick Cox" <[email protected]>
• st: Re: levinlin
  • From: Kit Baum <[email protected]>
• st: Re: FGLS and newey2
  • From: Kit Baum <[email protected]>
• st: Old Manuals Question
  • From: PETERSGD <[email protected]>
• st: Re: xtabond2
  • From: Kit Baum <[email protected]>
• st: re: Stata query
  • From: "Thurlow, James (IFPRI)" <[email protected]>
• Re: st:normal linear (mis)scaling
  • From: "D.Christodoulou" <[email protected]>
• st: RE: normal linear (mis)scaling
  • From: "Nick Cox" <[email protected]>
• Re: st: Hausman test
  • From: "Andrea Molinari" <[email protected]>
• st: normal linear (mis)scaling
  • From: "D.Christodoulou" <[email protected]>
• st: ivreg2
  • From: Cordula Stolberg <[email protected]>
• Re: st: RE: added graph feature: solution??
  • From: "Michael Blasnik" <[email protected]>
• RE: st: Again-Unique Case ID in Large Panel
  • From: "Nick Cox" <[email protected]>
• RE: st: RE: The Sargan test in -xtabond(2)-
  • From: "Drakos, Kostas" <[email protected]>
• Re: st: Again-Unique Case ID in Large Panel
  • From: [email protected] (Richard Gates)
• Re: st: Hausman test
  • From: David Greenberg <[email protected]>
• Re: st: predicting technical efficiency after frontier command:error message
  • From: Caixia Zhao <[email protected]>
• RE: st: predicting technical efficiency after frontier command
  • From: "David M. Drukker, StataCorp" <[email protected]>
• st: Hotdeck
  • From: "Reza Daniels" <[email protected]>
• RE: st: -estout- updated on SSC
  • From: "Jann, Ben" <[email protected]>
• st: RE: Conflicting Brant Test Results
  • From: "Alexander Tsai" <[email protected]>
• st: From: "Owens, Douglas Hamilton" <[email protected]>
  • From: [email protected]
• st: Two new items on SSC: gen_tail & carryforward
  • From: David Kantor <[email protected]>
• st: Conflicting Brant Test Results
  • From: [email protected]
• Re: st: Again-Unique Case ID in Large Panel
  • From: "Michael S. Hanson" <[email protected]>
• Re: st: -estout- updated on SSC
  • From: "Clive Nicholas" <[email protected]>
• st: Trouble with hotdeck procedure
  • From: "Reza Daniels" <[email protected]>
• RE: st: Again-Unique Case ID in Large Panel
  • From: "Stephen V. Burks" <[email protected]>
• Re: st: serial correlation in fixed effect model
  • From: "Clive Nicholas" <[email protected]>
• RE: st: RE: Trouble with confirm and looping.
  • From: [email protected]
• RE: st: Again-Unique Case ID in Large Panel
  • From: "Nick Cox" <[email protected]>
• st: -estout- updated on SSC
  • From: "Jann, Ben" <[email protected]>
• Re: RE: st: Again-Unique Case ID in Large Panel
  • From: [email protected]
• Re: st: Again-Unique Case ID in Large Panel
  • From: "Michael S. Hanson" <[email protected]>
• Re: st: Again-Unique Case ID in Large Panel
  • From: Suzy <[email protected]>
• Re: st: RE: Trouble with confirm and looping.
  • From: [email protected]
• RE: st: RE: Trouble with confirm and looping.
  • From: "Nick Cox" <[email protected]>
• st: various updates to SSC
  • From: "Nick Cox" <[email protected]>
• RE: st: Again-Unique Case ID in Large Panel
  • From: "Nick Cox" <[email protected]>
• Re: st: RE: Unique Case ID in Large Panel
  • From: [email protected]
• Re: st: Again-Unique Case ID in Large Panel
  • From: Suzy <[email protected]>
• RE: st: Again-Unique Case ID in Large Panel
  • From: "Nick Cox" <[email protected]>
• Re: st: Again-Unique Case ID in Large Panel
  • From: Suzy <[email protected]>
• st: xtivreg and instruments in levels
  • From: "Pedro Martins" <[email protected]>
• st: xtivreg & heteroskedasticity
  • From: Cordula Stolberg <[email protected]>
• Re: st: Again-Unique Case ID in Large Panel
  • From: "Stephen V. Burks" <[email protected]>
• Re: st: Again-Unique Case ID in Large Panel
  • From: Suzy <[email protected]>
• st: RE: Trouble with confirm and looping.
  • From: "Nick Cox" <[email protected]>
• Re: st: Again-Unique Case ID in Large Panel
  • From: Suzy <[email protected]>
• st: RE: Again-Unique Case ID in Large Panel
  • From: "Nick Cox" <[email protected]>
• st: Again-Unique Case ID in Large Panel
  • From: "Stephen V. Burks" <[email protected]>
• st: Trouble with confirm and looping.
  • From: [email protected]
• st: ado-mode updated
  • From: Bill Rising <[email protected]>
• st: RE: Unique Case ID in Large Panel
  • From: "Nick Cox" <[email protected]>
• RE: st: new: collapse2
  • From: "Nick Cox" <[email protected]>
• st: Unique Case ID in Large Panel
  • From: "Stephen V. Burks" <[email protected]>
• Re: st: new: collapse2
  • From: Roger Newson <[email protected]>
• Re: st: new: collapse2
  • From: Dan Blanchette <[email protected]>
• Re: st: Re: political geography
  • From: Ron�n Conroy <[email protected]>
• st: programmes on non-stationary panels
  • From: <[email protected]>
• Re: st: weigths
  • From: "Antonio Rodrigues Andres" <[email protected]>
• Re: st: weigths
  • From: "Antonio Rodrigues Andres" <[email protected]>
• RE: st: Re: political geography
  • From: "Julian Fennema" <[email protected]>
• Re: st: weigths
  • From: Constantine Daskalakis <[email protected]>
• RE: st: Re: political geography
  • From: "Nick Cox" <[email protected]>
• st: SSC activity July 2004
  • From: Kit Baum <[email protected]>
• st: Re: dynamic forecasts
  • From: Christopher F Baum <[email protected]>
• Re: st: Re: political geography
  • From: "Clive Nicholas" <[email protected]>
• st: Re: reproducing graphs
  • From: Christopher F Baum <[email protected]>
• st: dstdize command with svy commands
  • From: Suzy <[email protected]>
• st: Re: reproducible graphs
  • From: Christopher F Baum <[email protected]>
• st: Re: political geography
  • From: Christopher F Baum <[email protected]>
• Re: st: predicting technical efficiency after frontiercommand: errormessage
  • From: "Dev Vencappa" <[email protected]>
• st: levinlin, nocons, unit effects
  • From: "Falko Juessen" <[email protected]>
• st: Calculating selectivity terms from censored bivariate probit model
  • From: "Timothy Hinks" <[email protected]>
• st: "awaiting a response" (please don't say this!)
  • From: "Nick Cox" <[email protected]>
• st: serial correlation in fixed effect model
  • From: Christopher Grigoriou <[email protected]>
• Re: st: Period specific coefficient for individual effects
  • From: "Clive Nicholas" <[email protected]>
• Re: st: RE: The Sargan test in -xtabond(2)-
  • From: "Clive Nicholas" <[email protected]>
• Re: st: predicting technical efficiency after frontier command: errormessage
  • From: [email protected]
• st: Period specific coefficient for individual effects
  • From: hwiig <[email protected]>
• st: Quantile Regresion : sqreg and convergence.
  • From: "kompal sinha" <[email protected]>
• Re: st: SPSS to Stata using DBMS/Copy
  • From: Roger Newson <[email protected]>
• st: RE: The Sargan test in -xtabond(2)-
  • From: "Drakos, Kostas" <[email protected]>
• st: predicting technical efficiency after frontier command:error message
  • From: "Dev Vencappa" <[email protected]>
• Re: st: RE: searching the notes
  • From: Roger Harbord <[email protected]>
• st: Hausman test
  • From: "Andrea Molinari" <[email protected]>
• st: The Sargan test in -xtabond(2)-
  • From: "Clive Nicholas" <[email protected]>
• Re: st: Testing OLS assumptions in panel data
  • From: "Andrea Molinari" <[email protected]>
• RE: st: RE: added graph feature: solution??
  • From: "Nick Cox" <[email protected]>
• Re: st: weigths
  • From: "Antonio Rodrigues Andres" <[email protected]>
• Re: st: RE: added graph feature: solution??
  • From: Ron�n Conroy <[email protected]>
• st: RE: searching the notes
  • From: "Nick Cox" <[email protected]>
• st: Content-Transfer-Encoding: 8bit
  • From: "Drakos, Kostas" <[email protected]>
• st: RE: searching the notes
  • From: Roger Harbord <[email protected]>
• re: st: Re: xtlogit and logistic-cluster (REVISED)
  • From: David Airey <[email protected]>
• st: Re: xtlogit and logistic-cluster (REVISED)
  • From: Joseph Coveney <[email protected]>
• Re: st: RE: added graph feature: solution??
  • From: Fred Wolfe <[email protected]>
• st: new: collapse2
  • From: "David Roodman" <[email protected]>
• st: RE: estimation
  • From: "Nick Cox" <[email protected]>
• st: estimation
  • From: "Javier Gonzalez" <[email protected]>
• st: RE: Controlling look of variable labels in onewayplot
  • From: "Nick Cox" <[email protected]>
• st: SPSS to Stata using DBMS/Copy
  • From: Dan Blanchette <[email protected]>
• RE: st: RE: Re: Weighted number of observations
  • From: "Nick Cox" <[email protected]>
• Re: st: RE: Re: Weighted number of observations
  • From: Richard Williams <[email protected]>
• st: Controlling look of variable labels in onewayplot
  • From: David Harless <[email protected]>
• Re: st: Testing OLS assumptions in panel data
  • From: Stas Kolenikov <[email protected]>
• st: Re: RE: Re: RE: looping graph and changing title
  • From: "R.E. De Hoyos" <[email protected]>
• st: RE: Re: RE: looping graph and changing title
  • From: "Nick Cox" <[email protected]>
• st: Re: RE: looping graph and changing title
  • From: "R.E. De Hoyos" <[email protected]>
• RE: st: RE: Compact list of correlation, by cross-section
  • From: "Nick Cox" <[email protected]>
• Re: st: weigths
  • From: Stas Kolenikov <[email protected]>
• st: RE: looping graph and changing title
  • From: "Nick Cox" <[email protected]>
• Re: st: RE: Compact list of correlation, by cross-section
  • From: "Michael S. Hanson" <[email protected]>
• st: looping graph and changing title
  • From: "R.E. De Hoyos" <[email protected]>
• st: xtlogit and logistic-cluster (REVISED)
  • From: Ricardo Ovaldia <[email protected]>
• st: RE: searching the notes
  • From: "Nick Cox" <[email protected]>
• st: searching the notes
  • From: Roger Harbord <[email protected]>
• st: How to calculate fitted values from dynamic models
  • From: "Rio, Martin" <[email protected]>
• st: Treatreg - Calculating Program Impact
  • From: [email protected] (Scott A. Neslin)
• Re: st: Marginal & Impact Effects in a Tobit
  • From: May Boggess <[email protected]>
• st: RE: added graph feature: solution??
  • From: "Nick Cox" <[email protected]>
• st: added graph feature: solution??
  • From: Fred Wolfe <[email protected]>
• st: RE: Compact list of correlation, by cross-section
  • From: "Nick Cox" <[email protected]>
• Re: st: RE: Suggestion for an added graph feature
  • From: Fred Wolfe <[email protected]>
• st: Compact list of correlation, by cross-section
  • From: "Michael S. Hanson" <[email protected]>
• st: RE: Suggestion for an added graph feature
  • From: "Nick Cox" <[email protected]>
• st: RE: Suggestion for an added graph feature
  • From: "Wallace, John" <[email protected]>
• Re: st: Suggestion for an added graph feature
  • From: SamL <[email protected]>
• st: St: Inconsistency(?) in MANOVA and XTPCSE results
  • From: "carambas" <[email protected]>
• st: RE: RE: Re: Weighted number of observations
  • From: "Nick Cox" <[email protected]>
• Re: st: Suggestion for an added graph feature
  • From: Richard J Stoll <[email protected]>
• st: Testing OLS assumptions in panel data
  • From: "Andrea Molinari" <[email protected]>
• Re: st: Re: Weighted number of observations
  • From: Toyoto Iwata <[email protected]>
• Re: st: Re: Weighted number of observations
  • From: Toyoto Iwata <[email protected]>
• st: Suggestion for an added graph feature
  • From: Fred Wolfe <[email protected]>
• st: RE: Re: Weighted number of observations
  • From: "Nick Cox" <[email protected]>
• st: Re: Weighted number of observations
  • From: Friedrich Huebler <[email protected]>
• st: RE: Marginal & Impact Effects in a Tobit
  • From: "Nick Cox" <[email protected]>
• st: Marginal & Impact Effects in a Tobit
  • From: [email protected]
• Re: st: weigths
  • From: "Anthony Gichangi" <[email protected]>
• Re: st: weigths
  • From: "Antonio Rodrigues Andres" <[email protected]>
• st: weigths
  • From: "Antonio Rodrigues Andres" <[email protected]>
• st: a question on the weighted regression
  • From: Toyoto Iwata <[email protected]>
• st: Date: Tue, 3 Aug 2004 17:22:30 +0900
  • From: =?ks_c_5601-1987?B?sejH9sG+?= <[email protected]>
• Re: st: Re: Weighted number of observations
  • From: Toyoto Iwata <[email protected]>
• st: RE: xtabond deletes some variables
  • From: "Thuy Le" <[email protected]>
• st: xtabond deletes some variables
  • From: "Thuy Le" <[email protected]>
• st: Re: Weighted number of observations
  • From: Friedrich Huebler <[email protected]>
• st: Re: RE: tabulating variables: question
  • From: "R.E. De Hoyos" <[email protected]>
• st: RE: tostring question
  • From: "Nick Cox" <[email protected]>
• RE: st: Winsor by group - Thanks
  • From: "Kiousis, P. Konstantina" <[email protected]>
• Re: st: tostring question
  • From: "Dev Vencappa" <[email protected]>
• st: tostring question
  • From: "R.E. De Hoyos" <[email protected]>
• RE: st: Winsor by group - still can't get it
  • From: "Nick Cox" <[email protected]>
• RE: st: Winsor by group - still can't get it
  • From: "Kiousis, P. Konstantina" <[email protected]>
• Re: st: RE: tabulating variables: question
  • From: Eddy <[email protected]>
• Re: st: Sort Statalist Archives
  • From: Stas Kolenikov <[email protected]>
• st: RE: tabulating variables: question
  • From: "Nick Cox" <[email protected]>
• st: tabulating variables: question
  • From: Eddy <[email protected]>
• RE: st: Winsor by group
  • From: "Kiousis, P. Konstantina" <[email protected]>
• Re: st: Winsor by group
  • From: "Neil Shephard" <[email protected]>
• RE: st: Winsor by group
  • From: "Nick Cox" <[email protected]>
• st: Sort Statalist Archives
  • From: "Kiousis, P. Konstantina" <[email protected]>
• RE: st: est table --- problem with keep(list_of_variables)
  • From: "Nick Cox" <[email protected]>
• st: Winsor by group
  • From: "Kiousis, P. Konstantina" <[email protected]>
• Re: st: est table --- problem with keep(list_of_variables)
  • From: "Michael S. Hanson" <[email protected]>
• st: How to Get Help in Stata and Statalist
  • From: "Julia Gamas" <[email protected]>
• st: est table --- problem with keep(list_of_variables)
  • From: Fredrik Wallenberg <[email protected]>
• Re: st: Cointegration in a large data set
  • From: "Renzo Comolli" <[email protected]>
• st: Cointegration in a large data set
  • From: "student19767" <[email protected]>

---

Mail converted by MHonArc 2.5.5

---

---

© Copyright 1996–2025 StataCorp LLC   |   Terms of use   |   Privacy   |   Contact us   |   What's new   |   Site index