|
|  |
Statalist archive (ordered by date)
(last updated Sun Apr 30 15:20:38 2006)
- st: RE: Re: RE: Re: selmlog: question
- From: Rasmus Jřrgensen <rjo.cebr@cbs.dk>
- st: getting rid of the outliners
- From: "vora n" <vora_stata@hotmail.com>
- st: adding mean plot to anovaplot
- From: John Novak <jnovak@math.usc.edu>
- Re: st: Panel Cointegration
- From: "Edward F. Blackburne" <blackburne@shsu.edu>
- st: Re: STATA 8 and byte size
- From: "Rodrigo A. Alfaro" <ralfaro76@hotmail.com>
- st: RE: Writing parameter estimates to a file
- From: "Newson, Roger B" <r.newson@imperial.ac.uk>
- Re: st: Writing parameter estimates to a file
- From: "Ingo Brooks" <ingo.brooks@gmail.com>
- st: Stata for Linux on FreeBSD?
- From: "=?UTF-8?B?5a6L5pe25q2M?=" <shigesong@gmail.com>
- st: Comparing ROC curves after bootstrap optimism
- From: "Colin Cooke" <crcooke@gmail.com>
- st: RE: Year dummy and random effect in logit model
- From: <J.Fischer@lse.ac.uk>
- st: Year dummy and random effect in logit model
- From: "lek lek" <upsided123@hotmail.com>
- Re: st: -mfx- after poisson
- From: Scott Cunningham <scunning@gmail.com>
- Re: st: -mfx- after poisson
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- st: -mfx- after poisson
- From: Scott Cunningham <scunning@gmail.com>
- Re: st: Writing parameter estimates to a file
- From: Scott Cunningham <scunning@gmail.com>
- st: RE: Writing parameter estimates to a file
- From: Óscar Lourenço <osl@fe.uc.pt>
- st: Writing parameter estimates to a file
- From: SamL <saml@demog.berkeley.edu>
- st: STATA 8 and byte size
- From: "Gauri Khanna" <gwkhanna@hotmail.com>
- Re: st: Re: ML estimation
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: Panel Cointegration
- From: guignar6@hei.unige.ch
- st: Re: interweave?
- From: "Michael Blasnik" <michael.blasnik@verizon.net>
- st: Re: ML estimation
- From: "Rodrigo A. Alfaro" <ralfaro76@hotmail.com>
- st: Re:adoupdate doesn't recognize...
- From: Kit Baum <baum@bc.edu>
- Re: st: interweave
- From: "Svend Juul" <SJ@SOCI.AU.DK>
- RE: st: RE: Hausman taylor
- From: "Julia Spies" <JuliaSpies@gmx.de>
- st: ML estimation
- From: "marcel spijkerman" <marcel_spijkerman@hotmail.com>
- st: RE: Re: Re: RE: Nonlinear IV estimation in STATA
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- RE: st: RE: Hausman taylor
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- RE: st: Re: reshape when the stub is at the beginning of the variables
- From: Carol Bao <yanjunbb@yahoo.com>
- st: Re: Re: RE: Nonlinear IV estimation in STATA
- From: "Elaine Tan" <elaine.tan@econ.hku.hk>
- st: Re: RE: Nonlinear IV estimation in STATA
- From: "Elaine Tan" <elaine.tan@econ.hku.hk>
- st: -adoupdate- doesn't recognize that it's already updated certainpackages
- From: Joseph Coveney <jcoveney@bigplanet.com>
- Re: st: RE: Hausman taylor
- From: "Julia Spies" <JuliaSpies@gmx.de>
- Re: st: RE: Hausman taylor
- From: "Julia Spies" <JuliaSpies@gmx.de>
- st: RE: Hausman taylor
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: RE: Nonlinear IV estimation in STATA
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: interweave?
- From: clinton.thompson@summitllc.us
- RE: st: Downloading all ssc modules
- From: Paul Millar <paul.millar@shaw.ca>
- st: RE: Thanks re: Arbitrary limits on number of data series for line plots
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: Thanks re: Arbitrary limits on number of data series for line plots
- From: "Allan Reese (Cefas)" <allan.reese@cefas.co.uk>
- st: Re: Hausman taylor
- From: "Rodrigo A. Alfaro" <ralfaro76@hotmail.com>
- RE: st: NO attachments please
- From: Nick Winter <nw53@cornell.edu>
- RE: st: NO attachments please
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: RE: NO attachments please
- From: Marcello Pagano <pagano@hsph.harvard.edu>
- st: RE: NO attachments please
- From: "Alex Ogan" <aogan@ArrowstreetCapital.com>
- Re: st: NO attachments please
- From: Taavi Lai <taavi.lai@ut.ee>
- RE: st: using results of -sts list- (life tables)
- From: "David Winter" <d.l.winter@bham.ac.uk>
- st: heteroscedasticity in Tobit.
- From: "GASHI Ardiana" <A.Gashi@staffs.ac.uk>
- Re: st: Balancing survey data in Survey package
- From: "Michael Blasnik" <michael.blasnik@verizon.net>
- Re: st: Balancing survey data in Survey package
- From: Nick Winter <nw53@cornell.edu>
- Re: st: Copying tables to Word or PowerPoint
- From: "Ingo Brooks" <ingo.brooks@gmail.com>
- st: RE: RE: If command for the existence of a data value
- From: <Samu.Kurri@bof.fi>
- st: RE: If command for the existence of a data value
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: Balancing survey data in Survey package
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: If command for the existence of a data value
- From: <Samu.Kurri@bof.fi>
- st: NO attachments please
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: Copying tables to Word or PowerPoint
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- st: Hausman taylor
- From: "Julia Spies" <JuliaSpies@gmx.de>
- Re: st: Copying tables to Word or PowerPoint
- From: Sara Mottram <s.mottram@cphc.keele.ac.uk>
- st: Balancing survey data in Survey package
- From: w.paczkowski@att.net
- st: Copying tables to Word or PowerPoint
- From: w.paczkowski@att.net
- st: overidentification test after reg3
- From: "Ousmane" <xalebifaye@yahoo.co.uk>
- st: Re: tabstat: values in columns instead of rows?
- From: "Hendro Hendratno" <hendratno@dnet.net.id>
- st: Nonlinear IV estimation in STATA
- From: "Elaine Tan" <elaine.tan@econ.hku.hk>
- st: Marginal effects of probit model with an interaction term only
- From: Richard Lo <lateshouk@yahoo.co.uk>
- RE: st: Downloading all ssc modules
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: RE: Fw: RE: formatting and exporting ttest results
- From: "Riano, Juanita" <JRiano@imf.org>
- Re: st: Downloading all ssc modules
- From: "Austin Nichols" <austinnichols@gmail.com>
- st: Downloading all ssc modules
- From: Paul Millar <paul.millar@shaw.ca>
- Re: st: RE: Fw: RE: formatting and exporting ttest results
- From: "Austin Nichols" <austinnichols@gmail.com>
- Re: st: RE: Fw: RE: formatting and exporting ttest results
- From: "Austin Nichols" <austinnichols@gmail.com>
- Re: st: Merging using the best match from a set of variables
- From: "Austin Nichols" <austinnichols@gmail.com>
- st: Merging using the best match from a set of variables
- From: "MA V" <ma_v@hotmail.com>
- st: RE: Fw: RE: formatting and exporting ttest results
- From: "Riano, Juanita" <JRiano@imf.org>
- st: transfer function model and regression: EQUIVALENT???
- From: Frank Zhang <zhangmailer@yahoo.com>
- Re: st: interacted fixed effects
- From: "Austin Nichols" <austinnichols@gmail.com>
- st: Marginal Effects
- From: MERSKY@Waisman.Wisc.Edu
- Re: st: interacted fixed effects
- From: Scott Cunningham <scunning@gmail.com>
- st: Fw: RE: formatting and exporting ttest results
- From: "Hendro Hendratno" <hendratno@dnet.net.id>
- st: qreg: # of replications and covergence
- From: <J.Fischer@lse.ac.uk>
- st: test
- From: <J.Fischer@lse.ac.uk>
- RE: st: Clustering and fixed effects
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- Re: st: Clustering and fixed effects
- From: "Austin Nichols" <austinnichols@gmail.com>
- st: Clustering and fixed effects
- From: "Yvonne Capstick" <yvonnecapstick@hotmail.com>
- st: Panel data system estimation and prediction
- From: Marco Rocha <marcor_30@yahoo.com.br>
- Re: st: Arbitrary limits on number of data series for line plots
- From: vwiggins@stata.com (Vince Wiggins, StataCorp)
- RE: st: simple question: generating variables using the if / or command
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- [no subject]
- From: Marco Rocha <marcor_30@yahoo.com.br>
- RE: st: RE: simple question: generating variables using the if / or command
- From: "Gauri Khanna" <gwkhanna@hotmail.com>
- RE: st: RE: simple question: generating variables using the if / or command
- From: "Gauri Khanna" <gwkhanna@hotmail.com>
- RE: st: simple question: generating variables using the if / or command
- From: "Gauri Khanna" <gwkhanna@hotmail.com>
- Re: st: interacted fixed effects
- From: "Austin Nichols" <austinnichols@gmail.com>
- Re: st: interacted fixed effects
- From: Kremena Platikanova <Kremena.Platikanova@colorado.edu>
- RE: st: RE: To: statalist@hsphsun2.harvard.edu
- From: Lieu.N.Hazelwood@frb.gov
- RE: st: RE: To: statalist@hsphsun2.harvard.edu
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- st: RE: simple question: generating variables using the if / or command
- From: "John Novak" <jnovak@lbusd.k12.ca.us>
- RE: st: RE: To: statalist@hsphsun2.harvard.edu
- From: Lieu.N.Hazelwood@frb.gov
- st: RE: RE: RE: RE: RE: marginal coding of dummy varaible
- From: Valérie Jooste <vjooste@u-bourgogne.fr>
- RE: st: RE: To: statalist@hsphsun2.harvard.edu
- From: Lieu.N.Hazelwood@frb.gov
- RE: st: RE: To: statalist@hsphsun2.harvard.edu
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- RE: st: RE: To: statalist@hsphsun2.harvard.edu
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- Re: st: RE: To: statalist@hsphsun2.harvard.edu
- From: Lieu.N.Hazelwood@frb.gov
- RE: st: simple question: generating variables using the if / or command
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: To: statalist@hsphsun2.harvard.edu
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- st: RE: simple question: generating variables using the if / or command
- From: "David Harrison" <david.harrison@icnarc.org>
- Re: st: simple question: generating variables using the if / or command
- From: Scott Cunningham <scunning@gmail.com>
- st: RE: RE: RE: RE: marginal coding of dummy varaible
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- st: simple question: generating variables using the if / or command
- From: "Gauri Khanna" <gwkhanna@hotmail.com>
- st: To: statalist@hsphsun2.harvard.edu
- From: Lieu.N.Hazelwood@frb.gov
- RE: st: Dropping/Keeping observations-25 April
- From: "Gauri Khanna" <gwkhanna@hotmail.com>
- st: RE: RE: RE: marginal coding of dummy varaible
- From: Valérie Jooste <vjooste@u-bourgogne.fr>
- st: RE: RE: marginal coding of dummy varaible
- From: Valérie Jooste <vjooste@u-bourgogne.fr>
- Re: st: interacted fixed effects
- From: Scott Cunningham <scunning@gmail.com>
- RE: st: duplicating observations
- From: "louis boakye-yiadom" <louisby@hotmail.com>
- Re: st: Re: Arbitrary limits on number of data series for line plots
- From: n j cox <n.j.cox@durham.ac.uk>
- st: Re: Arbitrary limits on number of data series for line plots
- From: "Michael Blasnik" <michael.blasnik@verizon.net>
- st: Arbitrary limits on number of data series for line plots
- From: "Allan Reese (Cefas)" <allan.reese@cefas.co.uk>
- st: random effects GLS WITH CROSS-SECTION data
- From: peter harper <pharper11@yahoo.co.uk>
- st: RE: RE: Re: Lorenz curve graph options: can't get legend to work
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: Re: Lorenz curve graph options: can't get legend to work
- From: "philippe van kerm" <philippe.vankerm@ceps.lu>
- st: interacted fixed effects
- From: Kremena Platikanova <Kremena.Platikanova@colorado.edu>
- RE: st: Re: reshape when the stub is at the beginning of the variables
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: Re: reshape when the stub is at the beginning of the variables
- From: "Ada Ma" <heu034@googlemail.com>
- Re: st: Re: Using NEARMRG
- From: "MA V" <ma_v@hotmail.com>
- Re: st: Re: Using NEARMRG
- From: "Michael Blasnik" <michael.blasnik@verizon.net>
- RE: st: Re: Using NEARMRG
- From: "MA V" <ma_v@hotmail.com>
- RE: st: Re: reshape when the stub is at the beginning of the variables
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: Re: reshape when the stub is at the beginning of the variables
- From: "Ada Ma" <heu034@googlemail.com>
- st: Re: Using NEARMRG
- From: "Michael Blasnik" <michael.blasnik@verizon.net>
- st: Using NEARMRG
- From: "MA V" <ma_v@hotmail.com>
- st: RE: Windows Live Mail (beta)
- From: "Rajesh Tharyan" <R.Tharyan@exeter.ac.uk>
- RE: st: Re: reshape when the stub is at the beginning of the variables
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: using results of -sts list- (life tables)
- From: "Austin Nichols" <austinnichols@gmail.com>
- Re: st: Inconsistency with the 5 year avarage panel data set
- From: "Austin Nichols" <austinnichols@gmail.com>
- Re: st: Inconsistency with the 5 year avarage panel data set
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- RE: st: Re: reshape when the stub is at the beginning of the variables
- From: Paul Millar <paul.millar@shaw.ca>
- Re: st: Inconsistency with the 5 year avarage panel data set
- From: ilker kaya <kayailker@yahoo.com>
- Re: st: Inconsistency with the 5 year avarage panel data set
- From: "Austin Nichols" <austinnichols@gmail.com>
- Re: st: Re: reshape when the stub is at the beginning of the variables
- From: "Austin Nichols" <austinnichols@gmail.com>
- Re: st: Forthcoming edition of Hardin and Hilbe
- From: "Joseph McDonnell" <joseph.mcdonnell@hotmail.com>
- st: Inconsistency with the 5 year avarage panel data set
- From: ilker kaya <kayailker@yahoo.com>
- RE: st: duplicating observations
- From: "Newson, Roger B" <r.newson@imperial.ac.uk>
- st: estimating multivariate t distributions
- From: Casey Quinn <cq1@york.ac.uk>
- st: using results of -sts list- (life tables)
- From: "David Winter" <d.l.winter@bham.ac.uk>
- [no subject]
- st: Windows Live Mail (beta)
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: Re: Lorenz curve graph options: can't get legend to work
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: duplicating observations
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: RE: RE: RE: Re: Making a unique log file
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: RE: RE: Re: Making a unique log file
- From: "Donald Spady" <dspady@ualberta.ca>
- RE: st: Lorenz curve graph options: can't get legend to work
- From: "philippe van kerm" <philippe.vankerm@ceps.lu>
- st: RE: marginal coding of dummy varaible
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- Re: st: duplicating observations
- From: "louis boakye-yiadom" <louisby@hotmail.com>
- st: marginal coding of dummy varaible
- From: Valérie Jooste <vjooste@u-bourgogne.fr>
- RE: st: duplicating observations
- From: "b. water" <barleywater@hotmail.com>
- Re: st: duplicating observations
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- Re: st: duplicating observations
- From: "louis boakye-yiadom" <louisby@hotmail.com>
- st: Re: gradient matrix for ml model lf
- From: "Rodrigo A. Alfaro" <ralfaro76@hotmail.com>
- Re: st: duplicating observations
- From: SamL <saml@demog.berkeley.edu>
- Re: st: duplicating observations
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- Re: st: duplicating observations
- From: clinton.thompson@summitllc.us
- st: duplicating observations
- From: "louis boakye-yiadom" <louisby@hotmail.com>
- st: Re: Lorenz curve graph options: can't get legend to work
- From: Anna Gueorguieva <anna_i_g@yahoo.com>
- Re: st: Forthcoming edition of Hardin and Hilbe
- From: vwiggins@stata.com (Vince Wiggins, StataCorp)
- [no subject]
- st: Re: stata graphs in beamer
- From: "Eva Poen" <lexep2@nottingham.ac.uk>
- RE: st: Lorenz curve graph options: can't get legend to work
- From: "philippe van kerm" <philippe.vankerm@ceps.lu>
- st: Lorenz curve graph options: can't get legend to work
- From: Anna Gueorguieva <anna_i_g@yahoo.com>
- st: Re estout
- From: Kit Baum <kitbaum@mac.com>
- st: gradient matrix for ml model lf
- RE: st: RE: How to use stata xtmixed to do a sas mixed command?
- From: "b. water" <barleywater@hotmail.com>
- RE: st: Re: reshape when the stub is at the beginning of the variables
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: estout
- From: Scott Cunningham <scunning@gmail.com>
- RE: st: perform Poisson simulations
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: saving matrix
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: SV: saving matrix
- From: "Skjeret Frode (SNF)" <Frode.Skjeret@snf.no>
- RE: st: Re: uppercase and lowercase strings
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: perform Poisson simulations
- From: Joseph Coveney <jcoveney@bigplanet.com>
- st: saving matrix
- From: Vivian Sibbaluca <vsibbaluca@yahoo.com>
- RE: st: removing "first letters"
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: perform Poisson simulations
- From: Zhiqiang Feng <zf2@st-andrews.ac.uk>
- st: RE: RE: Re: Making a unique log file
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: test again, please ignore
- From: "b. water" <barleywater@hotmail.com>
- st: test, please ignore
- From: "b. water" <barleywater@hotmail.com>
- Re: st: Problem with hour format
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: How to check the contents of matrix elements in C plugin
- From: ariley@stata.com (Alan Riley)
- Re: st: stata graphs in beamer
- From: Phil Schumm <pschumm@uchicago.edu>
- st: graph combine with common legend [was: RE: Date: Wed, 26 Apr 2006 09:57:55 +1000]
- From: "Scott Merryman" <smerryman@kc.rr.com>
- Re: st: Re: reshape when the stub is at the beginning of the variables
- From: Joseph Coveney <jcoveney@bigplanet.com>
- st: RE: estout
- From: "Scott Merryman" <smerryman@kc.rr.com>
- st: stata graphs in beamer
- From: Kit Baum <baum@bc.edu>
- Re: st: reshape when the stub is at the beginning of the variables
- From: "Neil Shephard" <nshephard@gmail.com>
- st: RE: RMSE
- From: "Steichen, Thomas J." <SteichT@rjrt.com>
- st: RMSE
- From: "Daniel Schneider" <daniel.schneider@stanford.edu>
- st: Date: Wed, 26 Apr 2006 09:57:55 +1000
- From: Emily Yorkston <e.yorkston@uq.edu.au>
- Re: st: Re: reshape when the stub is at the beginning of the variables
- From: Paul Millar <paul.millar@shaw.ca>
- st: Re: reshape when the stub is at the beginning of the variables
- From: "Michael Blasnik" <michael.blasnik@verizon.net>
- st: test, please ignore
- From: "b. water" <barleywater@hotmail.com>
- Re: st: reshape when the stub is at the beginning of the variables
- From: Juan Manuel Jauregui <juan.manuel.jauregui.2006@anderson.ucla.edu>
- st: Re: RE: Re: Making a unique log file
- From: "Michael Blasnik" <michael.blasnik@verizon.net>
- st: reshape when the stub is at the beginning of the variables
- From: Carol Bao <yanjunbb@yahoo.com>
- Re: st: stset with multiple spells
- From: Juan Manuel Jauregui <juan.manuel.jauregui.2006@anderson.ucla.edu>
- RE: st: Re: uppercase and lowercase strings
- From: "MA V" <ma_v@hotmail.com>
- st: RE: Re: Making a unique log file
- From: "Donald Spady" <dspady@ualberta.ca>
- st: RE: Making a unique log file
- From: "Alex Ogan" <aogan@ArrowstreetCapital.com>
- st: Re: Making a unique log file
- From: "Michael Blasnik" <michael.blasnik@verizon.net>
- st: Making a unique log file
- From: "Donald Spady" <dspady@ualberta.ca>
- st: RE: uppercase and lowercase strings
- From: "Alex Ogan" <aogan@ArrowstreetCapital.com>
- st: Re: uppercase and lowercase strings
- From: "Michael Blasnik" <michael.blasnik@verizon.net>
- st: uppercase and lowercase strings
- From: "MA V" <ma_v@hotmail.com>
- Re: st: removing "first letters"
- From: "Radu Ban" <raduban@gmail.com>
- Re: st: removing "first letters"
- From: clinton.thompson@summitllc.us
- Re: st: removing "first letters"
- From: John Novak <jnovak@math.usc.edu>
- Re: st: Stata Graphs in Beamer
- From: Marcello Pagano <pagano@hsph.harvard.edu>
- st: estout
- From: Scott Cunningham <scunning@gmail.com>
- st: removing "first letters"
- From: "MA V" <ma_v@hotmail.com>
- Re: st: Stata Graphs in Beamer
- From: Phil Schumm <pschumm@uchicago.edu>
- Re: st: stset with multiple spells
- From: "Chris Chung" <cchungc403@rogers.com>
- Re: st: Re: Stata Graphs in Beamer
- From: Changhwan Kim <chkim@mail.utexas.edu>
- Re: st: Re: Stata Graphs in Beamer
- From: "Rijo John" <rmjohn@gmail.com>
- st: Problem with hour format
- From: "Edgard Alfonso Polanco Aguilar" <edgard.polanco@gmail.com>
- st: Re: Stata Graphs in Beamer
- From: "Michael Hagauer (GMX)" <michael.hagauer@gmx.at>
- st: Stata Graphs in Beamer
- From: bta78@mail.eco.utexas.edu
- Re: st: stset with multiple spells
- From: Juan Manuel Jauregui <juan.manuel.jauregui.2006@anderson.ucla.edu>
- st: Forthcoming edition of Hardin and Hilbe
- From: "Joseph McDonnell" <joseph.mcdonnell@hotmail.com>
- Re: st: RE: stset with multiple spells
- From: Juan Manuel Jauregui <juan.manuel.jauregui.2006@anderson.ucla.edu>
- RE: st: Dropping/Keeping observations-25 April
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- Re: st: appropriate survival analysis
- From: "Jamie Griffin" <Jamie.Griffin@lshtm.ac.uk>
- Re: st: How can I filter the results with FE regression?
- From: ilker kaya <kayailker@yahoo.com>
- st: Re: Reliability coefficient for factor analysis
- From: "Rodrigo A. Alfaro" <ralfaro76@hotmail.com>
- Re: st: Dropping/Keeping observations-25 April
- From: "Gauri Khanna" <gwkhanna@hotmail.com>
- Re: st: Out matrix of correlations in LaTeX
- From: Nick Winter <nw53@cornell.edu>
- Re: st: simulating datasets with certain characteristics
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- st: How to check the contents of matrix elements in C plugin
- From: "Lei Xuan" <leix@martingale-research.com>
- st: RE: Reliability coefficient for factor analysis
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: Reliability coefficient for factor analysis
- From: Allan Garland <agar5858@cox.net>
- Re: st: simulating datasets with certain characteristics
- From: "John Novak" <jnovak@lbusd.k12.ca.us>
- Re: st: simulating datasets with certain characteristics
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- st: RE: simulating datasets with certain characteristics
- From: "Bauldry, Shawn" <Sbauldry@ppv.org>
- st: simulating datasets with certain characteristics
- From: Jason Thompson <jat@northwestern.edu>
- st: Out matrix of correlations in LaTeX
- From: "Dasovic, Josip" <Josip_Dasovic@brown.edu>
- Re: st: Cumulative Risk - life table problem?
- From: "Svend Juul" <SJ@SOCI.AU.DK>
- Re: st: Histograms and "by"
- From: "Svend Juul" <SJ@SOCI.AU.DK>
- RE: st: How can I filter the results with FE regression?
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: How can I filter the results with FE regression?
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- st: RE: byindex variables
- From: "David Harrison" <david.harrison@icnarc.org>
- RE: st: Methods for selection bias
- From: "Hema Mistry" <Hema.Mistry@brunel.ac.uk>
- Re: st: How can I filter the results with FE regression?
- From: Ulrich Kohler <kohler@wz-berlin.de>
- Re: st: RE: How do I specify linear restrictions and AR(1) in xtivreg or xtivreg2
- From: David Granlund <david.granlund@econ.umu.se>
- re: st: RE: How to use stata xtmixed to do a sas mixed command?
- From: David Airey <david.airey@VANDERBILT.EDU>
- Re: st: Re: clogit
- From: "Caroline Xu" <caroxu@gmail.com>
- st: RE: How to use stata xtmixed to do a sas mixed command?
- From: "Marissa Lassere" <Marissa.Lassere@SESIAHS.HEALTH.NSW.GOV.AU>
- st: Re: Calculating returns between 2 dates using 2 files
- From: "Michael Blasnik" <michael.blasnik@verizon.net>
- Re: st: How can I filter the results with FE regression?
- From: "Ingo Brooks" <ingo.brooks@gmail.com>
- Re: st: Calculating returns between 2 dates using 2 files
- From: "Austin Nichols" <austinnichols@gmail.com>
- st: Calculating returns between 2 dates using 2 files
- From: "Hugh Colaco" <hmjc66@gmail.com>
- st: RE: Standardized Devaince residuals in GEE
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: byindex variables
- From: Kit Baum <baum@bc.edu>
- st: How can I filter the results with FE regression?
- From: Marcello Pagano <pagano@hsph.harvard.edu>
- Re: st: Estimate conditional probabilities after xtprobit
- From: "Austin Nichols" <austinnichols@gmail.com>
- st: byindex variables
- From: Fred Wolfe <fwolfe@arthritis-research.org>
- st: Cumulative Risk - life table problem?
- From: "David Winter" <d.l.winter@bham.ac.uk>
- Re: st: RE: stset with multiple spells
- From: "Austin Nichols" <austinnichols@gmail.com>
- st: RE: stset with multiple spells
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: RE: convert datafile to a matrix
- From: "Lei Xuan" <leix@martingale-research.com>
- Re: st: seperate scales/labels for seperate plots
- From: "Neil Shephard" <nshephard@gmail.com>
- st: seperate scales/labels for seperate plots
- Re: Re: st: if you use ESTOUT or OUTREG for exporting stata outoutthen you should try out XML_TAB as well
- From: "Zurab Sajaia" <zsajaia@hotmail.com>
- st: Histograms and "by"
- From: "MA V" <ma_v@hotmail.com>
- Re: st: How to test the equality of coef in regression model
- From: ronggui <ronggui.huang@gmail.com>
- Re: st: Graph help needed - superimposing two series within the same graph
- From: "Svend Juul" <SJ@SOCI.AU.DK>
- [no subject]
- From: "Svend Juul" <SJ@SOCI.AU.DK>
- Re: st: Truncating in two-way tables
- From: Joseph Coveney <jcoveney@bigplanet.com>
- RE: st: How to test the equality of coef in regression model
- From: "David Harrison" <david.harrison@icnarc.org>
- Re: st: How to test the equality of coef in regression model
- From: Joseph Coveney <jcoveney@bigplanet.com>
- Re: st: How to test the equality of coef in regression model
- From: Ronnie Babigumira <rb.glists@gmail.com>
- st: How to test the equality of coef in regression model
- From: ronggui <ronggui.huang@gmail.com>
- st: Truncating in two-way tables
- From: Sara Mottram <s.mottram@cphc.keele.ac.uk>
- Re: st: stset with multiple spells
- From: "Chris Chung" <cchungc403@rogers.com>
- Re: st: stset with multiple spells
- From: Sara Mottram <s.mottram@cphc.keele.ac.uk>
- st: RE: Graph help needed - superimposing two series within the same graph in Stata 8.0
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- st: stset with multiple spells
- From: Juan Manuel Jauregui <juan.manuel.jauregui.2006@anderson.ucla.edu>
- st: Graph help needed - superimposing two series within the same graph in Stata 8.0
- From: Ashwin Ananthakrishnan <ashwinna@yahoo.com>
- st: appropriate survival analysis
- From: "Goldbacher, Edie" <goldbacherem@upmc.edu>
- st: histograms and categorical variable
- From: "MA V" <ma_v@hotmail.com>
- st: Re: clogit
- From: "Rodrigo A. Alfaro" <ralfaro76@hotmail.com>
- Re: st: why can't STATA add odd numbers?
- From: "David Merriman" <dmerrim@luc.edu>
- st: RE: why can't STATA add odd numbers?
- From: "Rajesh Tharyan" <R.Tharyan@exeter.ac.uk>
- Re: st: why can't STATA add odd numbers?
- From: Ronnie Babigumira <rb.glists@gmail.com>
- RE: st: why can't STATA add odd numbers?
- From: "Marino, Jennifer" <jmarino@fhcrc.org>
- Re: st: why can't STATA add odd numbers?
- From: Richard Goldstein <richgold@ix.netcom.com>
- st: Standardized Devaince residuals in GEE
- st: why can't STATA add odd numbers?
- From: "David Merriman" <dmerrim@luc.edu>
- st: Estimate conditional probabilities after xtprobit
- From: "Nikolaos Kanellopoulos" <nkkanel@yahoo.gr>
- st: Re: Random/fixed effects
- From: "R.E. De Hoyos" <redeho@hotmail.com>
- st: Random/fixed effects
- From: peter harper <pharper11@yahoo.co.uk>
- Re: st: if you use ESTOUT or OUTREG for exporting stata outoutthen you should try out XML_TAB as well
- From: "Christer Thrane" <ch-thran@online.no>
- Re: st: if you use ESTOUT or OUTREG for exporting stata outoutthen you should try out XML_TAB as well
- From: "David Merriman" <dmerrim@luc.edu>
- st: new package dirifit
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- RE: st: Substring command
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: clogit
- From: "Caroline Xu" <caroxu@gmail.com>
- st: Re: formatting and exporting ttest results
- From: "Ina Ganguli" <ina.ksg@gmail.com>
- st: convert datafile to a matrix
- From: Kit Baum <baum@bc.edu>
- Re: st: Substring command
- From: "victor michael zammit" <vmz@vol.net.mt>
- st: MLE estimation
- Re: st: Dropping/Keeping observations
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: Re: STATA is blocked when closing the data editor window
- From: José Maria <jmpsouza@usp.br>
- Re: st: STATA is blocked when closing the data editor window
- From: Ronnie Babigumira <rb.glists@gmail.com>
- st: saving bootstrap results
- From: Jennifer Devine <jdevine@mun.ca>
- st: STATA is blocked when closing the data editor window
- From: "marcel spijkerman" <marcel_spijkerman@hotmail.com>
- Re: st: Dropping/Keeping observations
- From: "Michael Blasnik" <michael.blasnik@verizon.net>
- Re: st: Dropping/Keeping observations
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: Dropping/Keeping observations
- From: "Gauri Khanna" <gwkhanna@hotmail.com>
- st: multinomial selection, other than selmlog?
- From: Sandra Slaughter <sandras@cyrus.andrew.cmu.edu>
- st: BSWREG and difference of means test
- From: Alan Diener <Alan_Diener@hc-sc.gc.ca>
- st: No Standard Errors in MLOGIT
- From: Charles Parekh <charles.parekh@nyu.edu>
- RE: st: RE: Preserve
- From: "Steichen, Thomas J." <SteichT@rjrt.com>
- Re: st: RE: Preserve
- From: Fred Wolfe <fwolfe@arthritis-research.org>
- st: convert datafile into a matrix
- From: "Lei Xuan" <leix@martingale-research.com>
- st: Re: RE: Re: selmlog: question
- From: "R.E. De Hoyos" <redeho@hotmail.com>
- Re: st: Methods for selection bias
- From: "R.E. De Hoyos" <redeho@hotmail.com>
- Re: st: RE: Capabilities of Stata 7
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- Re: st: Preserve
- From: Gary Longton <glongton@fhcrc.org>
- RE: st: foreach-question
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: Preserve
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: Producing averages for cross sectional data by ID
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: bys
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: Re: Expanded significance values in STATA output?
- From: "G Elliott Wimmer" <g.elliott@psych.stanford.edu>
- st: RE: Capabilities of Stata 7
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: RE: ivreg2 test of exogeneity
- st: gologit2 2.1.3
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- st: RE: How do I specify linear restrictions and AR(1) in xtivreg or xtivreg2
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: Producing averages for cross sectional data by ID
- From: "Gauri Khanna" <gwkhanna@hotmail.com>
- st: RE: Stata behavior
- From: "Diego Bassani" <Diego_Bassani@camh.net>
- re: st: Stata behavior
- From: David Airey <david.airey@vanderbilt.edu>
- st: Bootstrapping standard errors from two different regression
- From: Daniel Zerfu <daniel_zerfu@yahoo.com>
- RE: st: RE: rounding in STATA
- From: "Siyam, Amani" <siyama@who.int>
- st: Fwd: Capabilities of Stata 7
- From: "Mohammad Ehsanul Karim" <wildscop@yahoo.com>
- st: Capabilities of Stata 7
- From: "Mohammad Ehsanul Karim" <ehsan.karim@gmail.com>
- Re: st: Methods for selection bias
- From: "Anders Alexandersson" <andersalex@gmail.com>
- st: Thanks to those who answered my Q on how to save significance levels a few days ago
- From: "Ada Ma" <heu034@googlemail.com>
- st: Stata behavior
- From: Wolney Conde <wolneyconde@gmail.com>
- st: Re: Creating a macro for files
- From: Kit Baum <baum@bc.edu>
- st: Re: backing up ado files
- From: Kit Baum <baum@bc.edu>
- st: How do I specify linear restrictions and AR(1) in xtivreg or xtivreg2
- From: David Granlund <david.granlund@econ.umu.se>
- st: bys
- From: Fred Wolfe <fwolfe@arthritis-research.org>
- st: Preserve
- From: Fred Wolfe <fwolfe@arthritis-research.org>
- st: RE: ivreg2 test of exogeneity
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: hsearch
- From: Fred Wolfe <fwolfe@arthritis-research.org>
- Re: Re: st: if you use ESTOUT or OUTREG for exporting stata outout then you should try out XML_TAB as well
- From: "Zurab Sajaia" <zsajaia@hotmail.com>
- Re: st: foreach-question
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- Re: st: foreach-question
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: foreach-question
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- st: foreach-question
- From: Johannes Geyer <JGeyer@diw.de>
- st: ivreg2 test of exogeneity
- Re: st: Methods for selection bias
- From: "Gauri Khanna" <gwkhanna@hotmail.com>
- st: Arellano-Bond:endogenous
- From: Murali <n.murali@pgrad.unimelb.edu.au>
- Re: st: Ordered Probit Regression with censored values
- From: "Aniceto Orbeta" <aorbeta@gmail.com>
- Re: st: Ordered Probit Regression with censored values
- From: "Aniceto Orbeta" <aorbeta@gmail.com>
- Re: st: RE: RE: "unique" with "by"
- From: "Shige Song" <shigesong@gmail.com>
- st: MLE for descrete competing risk model
- RE: st: specifying j in Xijt
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: specifying j in Xijt
- From: "Clive Nicholas" <Clive.Nicholas@newcastle.ac.uk>
- st: Re: Changing positive values to negative in Stata
- From: Friedrich Huebler <huebler@rocketmail.com>
- Re: st: RE: Changing positive values to negative in Stata
- From: Suzy <scott_788@wowway.com>
- Re: st: Ordered Probit Regression with censored values
- From: Phuong Lan Nguyen <phuong@u.washington.edu>
- st: Bootstrap variations
- From: Constantine Daskalakis <C_Daskalakis@mail.jci.tju.edu>
- RE: st: RE: Changing positive values to negative in Stata
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: RE: Changing positive values to negative in Stata
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: RE: Changing positive values to negative in Stata
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: Re: creating a macro for files
- From: Friedrich Huebler <huebler@rocketmail.com>
- Re: st: RE: Changing positive values to negative in Stata
- From: Suzy <scott_788@wowway.com>
- st: RE: Re: creating a macro for files
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: Ordered Probit Regression with censored values
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: Re: creating a macro for files
- From: Kit Baum <baum@bc.edu>
- st: Update to -moremata- on SSC: Correction
- From: "Ben Jann" <ben.jann@soz.gess.ethz.ch>
- Re: st: Ordered Probit Regression with censored values
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: reporting of R2 in xtreg
- From: "Anna S. Chung" <astchung@umich.edu>
- RE: st: calculating longitudinal-latitudinal distances
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: Changing positive values to negative in Stata
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: Methods for selection bias
- From: "Anders Alexandersson" <andersalex@gmail.com>
- st: Changing positive values to negative in Stata
- From: Suzy <scott_788@wowway.com>
- st: Changing positive values to negative in Stata
- From: Suzy <scott_788@wowway.com>
- st: Ordered Probit Regression with censored values
- From: Phuong Lan Nguyen <phuong@u.washington.edu>
- Re: st: Methods for selection bias
- From: "Robert Duval" <rduval@gmail.com>
- st: RE: interpreting marginal effects of poisson
- From: "Scott Merryman" <smerryman@kc.rr.com>
- Re: st: calculating longitudinal-latitudinal distances
- From: "Austin Nichols" <austinnichols@gmail.com>
- Re: st: RE: backing up ado files
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- Re: st: RE: backing up ado files
- From: Michael McCulloch <mm@pinest.org>
- Re: st: saving graphs and intra class correlation
- From: "Austin Nichols" <austinnichols@gmail.com>
- st: RE: saving graphs and intra class correlation
- From: "Alex Ogan" <aogan@ArrowstreetCapital.com>
- st: RE: RE: RE: Using "outsheet" and foreach again
- From: "Rajesh Tharyan" <R.Tharyan@exeter.ac.uk>
- st: saving graphs and intra class correlation
- From: Diego Bellavia <messadua@yahoo.it>
- st: RE: backing up ado files
- From: "Steichen, Thomas J." <SteichT@rjrt.com>
- st: RE: backing up ado files
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: backing up ado files
- From: Michael McCulloch <mm@pinest.org>
- st: RE: Creating panel data?
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: Creating panel data?
- From: Tutor 2005 UM <tutor2005um@googlemail.com>
- Re: st: Substring command
- From: "Austin Nichols" <austinnichols@gmail.com>
- RE: st: Mata question
- From: "Ben Jann" <ben.jann@soz.gess.ethz.ch>
- st: New SSC package: -charlson-
- From: "Vicki Stagg" <vlstagg@ucalgary.ca>
- Re: st: if you use ESTOUT or OUTREG for exporting stata outout thenyou should try out XML_TAB as well
- From: "Christopher W. Ryan" <cryan@binghamton.edu>
- Re: st: Creating panel data?
- From: Friedrich Huebler <huebler@rocketmail.com>
- st: Creating panel data?
- From: Ann Edith Helfman <ahelfman@fas.harvard.edu>
- Re: st: Substring command
- From: Ronán Conroy <rconroy@rcsi.ie>
- Re: st: specifying j in Xijt
- From: Kremena Platikanova <Kremena.Platikanova@colorado.edu>
- st: Methods for selection bias
- From: "Hema Mistry" <Hema.Mistry@brunel.ac.uk>
- st: RE: RE: Using "outsheet" and foreach again
- From: "Riano, Juanita" <JRiano@imf.org>
- st: RE: Using "outsheet" and foreach again
- From: "Rajesh Tharyan" <R.Tharyan@exeter.ac.uk>
- st: if you use ESTOUT or OUTREG for exporting stata outout then you should try out XML_TAB as well
- From: "Zurab Sajaia" <zsajaia@hotmail.com>
- Re: st: Mata question
- From: wgould@stata.com (William Gould, Stata)
- Re: st: Expanded significance values in STATA output?
- From: "Tim Wade" <wadetj@gmail.com>
- st: calculating longitudinal-latitudinal distances
- From: Scott Cunningham <scunning@gmail.com>
- st: RE: poisson will not converge
- From: "Scott Merryman" <smerryman@kc.rr.com>
- RE: st: RE: graph bar, over() total?-- how do I get a bar with total over categories? --> Thank you!
- From: Anna Gueorguieva <anna_i_g@yahoo.com>
- Re: st: Mata question
- From: wgould@stata.com (William Gould, Stata)
- Repost: Using suest
- From: "Amber Katz" <academicgirl@gmail.com>
- st: RE: graph bar, over() total?-- how do I get a bar with total over categories?
- From: "Scott Merryman" <smerryman@kc.rr.com>
- st: UK Short Courses
- st: graph bar, over() total?-- how do I get a bar with total over categories?
- From: Anna Gueorguieva <anna_i_g@yahoo.com>
- st: RE: Mata question
- From: "Ben Jann" <ben.jann@soz.gess.ethz.ch>
- st: Mata question
- From: "Daniel Hoechle" <daniel.hoechle@gmail.com>
- st: RE: Re: selmlog: question
- From: Rasmus Jřrgensen <rjo.cebr@cbs.dk>
- RE: st: RE: transformation of a continuous variable for a logistic regression model
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: Substring command
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: specifying j in Xijt
- From: "Clive Nicholas" <Clive.Nicholas@newcastle.ac.uk>
- st: RE: Matrix list
- From: "David Harrison" <david.harrison@icnarc.org>
- Re: st: timeout option
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- st: Matrix list
- From: "Anthony Moorman" <A.V.Moorman@soton.ac.uk>
- st: Substring command
- From: "Mosca, Ilaria" <IMosca@ctg-zaio.nl>
- st: RE: RE: Matrix list
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: RE: Substring command
- From: "Mosca, Ilaria" <IMosca@ctg-zaio.nl>
- Re: st: RE: transformation of a continuous variable for a logisticregression model
- From: Suzy <scott_788@wowway.com>
- Re: st: timeout option
- From: jpitblado@stata.com (Jeff Pitblado, StataCorp LP)
- RE: st: RE: transformation of a continuous variable for a logistic regression model
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: timeout option
- From: "Sascha O. Becker" <sascha.becker@gmx.de>
- Re: st: RE: transformation of a continuous variable for a logisticregression model
- From: Suzy <scott_788@wowway.com>
- Re: st: off-topic: masters degree in biostatistics online?
- From: "Neil Shephard" <nshephard@gmail.com>
- Re: st: how to svyset for stratified multiple-stage cluster sampling in STATA
- From: jpitblado@stata.com (Jeff Pitblado, StataCorp LP)
- Re: st: timeout option
- From: jpitblado@stata.com (Jeff Pitblado, StataCorp LP)
- st: RE: lnskew0
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: xtreg fe and matrix inversion error
- From: "Scott Imberman" <Imberman@econ.bsos.umd.edu>
- st: RE: Expanded significance values in STATA output?
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: Expanded significance values in STATA output?
- From: Jason Thompson <jat@northwestern.edu>
- Re: st: Expanded significance values in STATA output?
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: poisson will not converge
- From: Scott Cunningham <scunning@gmail.com>
- st: xtabond
- From: "Caroline Xu" <caroxu@gmail.com>
- Re: st: off-topic: masters degree in biostatistics online?
- From: "Mark L" <economicus@gmail.com>
- st: RE: RE: graph and font size
- From: Jesper Kjćr Hansen <kjaer.hansen@oncable.dk>
- st: automatic v. user-instigated update checks
- From: "Marino, Jennifer" <jmarino@fhcrc.org>
- st: RE: graph and font size
- From: "Kallimanis, Bellinda" <bkallimanis@fmhi.usf.edu>
- st: RE: Using "outsheet" and foreach again
- From: "Marino, Jennifer" <jmarino@fhcrc.org>
- st: Using "outsheet" and foreach again
- From: "Riano, Juanita" <JRiano@imf.org>
- st: graph and font size
- From: Sean Shu <sshu@hkpr.on.ca>
- st: Expanded significance values in STATA output?
- From: "G Elliott Wimmer" <g.elliott@psych.stanford.edu>
- Re: st: RE: RE: Antispam message
- From: Marcello Pagano <pagano@hsph.harvard.edu>
- Re: st: Another reshape wide question
- From: M Hollis <m73hollis_stata@yahoo.com>
- RE: st: RE: Question for Statalist about "Creating a macro for files"
- From: "Riano, Juanita" <JRiano@imf.org>
- RE: st: lnskew0
- From: "Feiveson, Alan H. (JSC-SK311)" <alan.h.feiveson@nasa.gov>
- Re: st: lnskew0
- From: Ronán Conroy <rconroy@rcsi.ie>
- RE:st: lnskew0
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: RE: Question for Statalist about "Creating a macro for files"
- From: Ronnie Babigumira <rb.glists@gmail.com>
- st: RE: Questiion: for with by
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: lnskew0
- From: "Vivien W. Chen" <wxc203@psu.edu>
- RE: st: mata courses?
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Mata help (was: Re: st: mata courses?)
- Re: st: Question for Statalist about "Creating a macro for files"
- From: Ronnie Babigumira <rb.glists@gmail.com>
- Re: st: RE: RE: Antispam message
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- st: RE: RE: "unique" with "by"
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: Question for Statalist about "Creating a macro for files"
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: Questiion: for with by
- From: "Andrea Mascotto" <andrea.mascotto@ne.su.se>
- st: RE: xtreg fe and matrix inversion error
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: Question for Statalist about "Creating a macro for files"
- From: "Riano, Juanita" <JRiano@imf.org>
- re: st: mata courses?
- From: David Airey <david.airey@Vanderbilt.Edu>
- st: RE: RE: Antispam message
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: Using suest with probit estimation
- From: "Amber Katz" <academicgirl@gmail.com>
- RE: st: RE: transformation of a continuous variable for a logistic regression model
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: xtreg fe and matrix inversion error
- From: "Scott Imberman" <Imberman@econ.bsos.umd.edu>
- RE: st: off-topic: masters degree in biostatistics online?
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: Standardized Devaince residuals
- st: RE: Antispam message
- From: "Kallimanis, Bellinda" <bkallimanis@fmhi.usf.edu>
- RE: st: mata courses?
- From: "Kallimanis, Bellinda" <bkallimanis@fmhi.usf.edu>
- Re: st: RE: transformation of a continuous variable for a logisticregression model
- From: Suzy <scott_788@wowway.com>
- st: RE: "unique" with "by"
- From: "David Harrison" <david.harrison@icnarc.org>
- st: Stata9
- From: "Rodrigo A. Alfaro" <ralfaro76@hotmail.com>
- Re: st: gllamm, xtlogit, ...
- From: "Stas Kolenikov" <skolenik@gmail.com>
- Re: st: mata courses?
- From: wgould@stata.com (William Gould, Stata)
- RE: st: sequential application of a model to a number ofdatasets in manner of foreach var of varlis
- From: "Ben Dwamena" <bdwamena@med.umich.edu>
- st: "unique" with "by"
- From: "Shige Song" <shigesong@gmail.com>
- Re: st: off-topic: masters degree in biostatistics online?
- From: "Shige Song" <shigesong@gmail.com>
- Re: st: RE: RE: Another reshape wide question
- From: "Amber Katz" <academicgirl@gmail.com>
- RE: st: Antispam message
- From: "Feiveson, Alan H. (JSC-SK311)" <alan.h.feiveson@nasa.gov>
- st: RE: renvars
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: Antispam message
- From: Marcello Pagano <pagano@hsph.harvard.edu>
- st: off-topic: masters degree in biostatistics online?
- From: "Christopher W. Ryan" <cryan@binghamton.edu>
- st: renvars
- From: "Rijo John" <rmjohn@gmail.com>
- st: RE: Can I get the dropped variable back?
- From: Jing Xie <JingXie@medschl.cam.ac.uk>
- Re: st: Antispam message
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- st: RE: mata courses?
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- RE: st: sequential application of a model to a number of datasets in manner of foreach var of varlist
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: specifying j in Xijt
- From: Kremena Platikanova <Kremena.Platikanova@colorado.edu>
- Re: st: interpreting marginal effects of poisson
- From: Scott Cunningham <scunning@gmail.com>
- st: Strange behaviour updating...
- From: "Neil Shephard" <nshephard@gmail.com>
- Re: st: RE: Reshape Question
- From: "Rijo John" <rmjohn@gmail.com>
- st: RE: transformation of a continuous variable for a logistic regression model
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- Re: st: Antispam message
- From: Ronnie Babigumira <rb.glists@gmail.com>
- st: Antispam message
- From: "Seb Buechte" <sfbuechte@gmail.com>
- Re: st: Reshape Question
- From: "Seb Buechte" <sfbuechte@gmail.com>
- st: RE: Reshape Question
- From: "David Harrison" <david.harrison@icnarc.org>
- Re: st: Can I get the dropped variable back?
- From: ronggui <ronggui.huang@gmail.com>
- st: RE: RE: Duration model
- From: "Mosca, Ilaria" <IMosca@ctg-zaio.nl>
- st: Reshape Question
- From: "Rijo John" <rmjohn@gmail.com>
- RE: st: RE: RE: Another reshape wide question
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: Duration model
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- st: RE: RE: Velicer's minimum average partial program?
- From: "Anderson, Bradley J" <BAnderson1@lifespan.org>
- st: RE: Can I get the dropped variable back?
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- st: Duration model
- From: "Mosca, Ilaria" <IMosca@ctg-zaio.nl>
- Re: st: gllamm, xtlogit, ...
- From: "Neil Shephard" <nshephard@gmail.com>
- Re: st: Can I get the dropped variable back?
- From: Ronnie Babigumira <rb.glists@gmail.com>
- st: RE: Can I get the dropped variable back?
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: Velicer's minimum average partial program?
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- st: Can I get the dropped variable back?
- From: ronggui <ronggui.huang@gmail.com>
- st: Velicer's minimum average partial program?
- From: "Anderson, Bradley J" <BAnderson1@lifespan.org>
- st: NEW COMMAND:Pairdata
- From: "Richard J Williamson" <richard.williamson@iop.kcl.ac.uk>
- st: gllamm, xtlogit, ...
- From: Martina Brandt <m.s.brandt@web.de>
- st: interpreting marginal effects of poisson
- From: Scott Cunningham <scunning@gmail.com>
- Re: st: sequential application of a model to a number of datasets in manner of foreach var of varlist
- From: "Neil Shephard" <nshephard@gmail.com>
- st: sequential application of a model to a number of datasets inmanner of foreach var of varlist
- From: "Ben Dwamena" <bdwamena@med.umich.edu>
- st: transformation of a continuous variable for a logistic regressionmodel
- From: Suzy <scott_788@wowway.com>
- Re: st: format question
- From: Patricia Vera Rojas <pverarojas@yahoo.es>
- RE: st: mata function : coding optional argument
- From: "U.A.QU.AP" <uaquap@gnet.tn>
- RE: st: mata function : coding optional argument
- From: "Ben Jann" <ben.jann@soz.gess.ethz.ch>
- Re: st: format question
- From: clinton.thompson@summitllc.us
- st: format question
- From: Patricia Vera Rojas <pverarojas@yahoo.es>
- Re: st: Storing a correlation matrix
- From: Marcello Pagano <pagano@hsph.harvard.edu>
- Re: st: post-estimation commands for Poisson
- From: Scott Cunningham <scunning@gmail.com>
- st: mata courses?
- From: David Airey <david.airey@Vanderbilt.Edu>
- st: how to svyset for stratified multiple-stage cluster sampling in STATA
- From: "Jian Zhang" <jzh@ucdavis.edu>
- st: timeout option
- From: "Sascha O. Becker" <sascha.becker@gmx.de>
- Re: st: RE: RE: Another reshape wide question
- From: "Amber Katz" <academicgirl@gmail.com>
- Re: st: nlcom and xtmixed
- From: rgutierrez@stata.com (Roberto G. Gutierrez, StataCorp)
- Re: st: mata function : coding optional argument
- From: "U.A.QU.AP" <uaquap@gnet.tn>
- st: RE: how do i save the significance levels of coefficients after estimation?
- From: wgould@stata.com (William Gould, Stata)
- RE: st: RE: RE: Another reshape wide question
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: Re: RE: Re: RE: compute elasticity: Probit VS LPM
- From: "Feng Liu" <fliu22@gmail.com>
- Re: st: RE: RE: Another reshape wide question
- From: "Amber Katz" <academicgirl@gmail.com>
- Re: st: Storing a correlation matrix
- From: wgould@stata.com (William Gould, Stata)
- st: New -tmap- FAQ
- From: kcrow@stata.com (Kevin Crow, StataCorp)
- st: RE: RE: Another reshape wide question
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: Another reshape wide question
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: Another reshape wide question
- From: "Amber Katz" <academicgirl@gmail.com>
- st: Simultaneous Panel Data model
- From: "Alvaro Ruiz-Navajas" <alvaro.g.ruiz-navajas-1@student.manchester.ac.uk>
- st: RE: Re: RE: compute elasticity: Probit VS LPM
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- st: RE: RE: reshape wide command without specifying all variables?
- From: "Marino, Jennifer" <jmarino@fhcrc.org>
- st: bootstrapping and glm
- From: Jennifer Devine <jdevine@mun.ca>
- st: RE: reshape wide command without specifying all variables?
- From: "David Harrison" <david.harrison@icnarc.org>
- st: RE: reshape wide command without specifying all variables?
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: markov transition model
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: reshape wide command without specifying all variables?
- From: "Amber Katz" <academicgirl@gmail.com>
- st: RE: Storing a correlation matrix
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: Re: RE: compute elasticity: Probit VS LPM
- From: "Feng Liu" <fliu22@gmail.com>
- st: Panel data with dependent variable from a single period: Which regression?
- From: "Amber Katz" <academicgirl@gmail.com>
- Re: st: post-estimation commands for Poisson
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- RE: st: RE: how do i save the significance levels of coefficients after estimation?
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- Re: st: post-estimation commands for Poisson
- From: Scott Cunningham <scunning@gmail.com>
- RE: st: RE: how do i save the significance levels of coefficients after estimation?
- From: "JP Azevedo" <jp.statalist@gmail.com>
- Re: st: RE: how do i save the significance levels of coefficients after estimation?
- From: "Ada Ma" <heu034@googlemail.com>
- st: nlcom and xtmixed
- From: Lars Korsholm <korsholm@stat.sdu.dk>
- st: RE: Storing a correlation matrix (related topic)
- From: "Feiveson, Alan H. (JSC-SK311)" <alan.h.feiveson@nasa.gov>
- RE: st: RE: how do i save the significance levels of coefficients after estimation?
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- Re: st: RE: how do i save the significance levels of coefficients after estimation?
- From: "Ada Ma" <heu034@googlemail.com>
- st: RE: compute elasticity: Probit VS LPM
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- Re: st: RE: how do i save the significance levels of coefficients after estimation?
- From: "Ada Ma" <heu034@googlemail.com>
- Re: st: post-estimation commands for Poisson
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- st: Storing a correlation matrix
- From: Marcello Pagano <pagano@hsph.harvard.edu>
- st: RE: post-estimation commands for Poisson
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- st: RE: how do i save the significance levels of coefficients after estimation?
- From: "Maarten Buis" <M.Buis@fsw.vu.nl>
- st: compute elasticity: Probit VS LPM
- From: "Feng Liu" <fliu22@gmail.com>
- st: post-estimation commands for Poisson
- From: Scott Cunningham <scunning@gmail.com>
- st: how do i save the significance levels of coefficients after estimation?
- From: "Ada Ma" <heu034@googlemail.com>
- Re: st: mata function : coding optional argument
- From: wgould@stata.com (William Gould, Stata)
- st: mvsumm
- From: Kit Baum <baum@bc.edu>
- st: RE: RE: RE: RE: Interpretation of Smith-Blundell exog. test
- From: "Ivar Pettersen" <ivar.pettersen@svt.ntnu.no>
- st: RE: RE: RE: Interpretation of Smith-Blundell exog. test
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: RE: RE: Interpretation of Smith-Blundell exog. test
- From: "Ivar Pettersen" <ivar.pettersen@svt.ntnu.no>
- st: RE: Interpretation of Smith-Blundell exog. test
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: Interpretation of Smith-Blundell exog. test
- From: "Ivar Pettersen" <ivar.pettersen@svt.ntnu.no>
- Re: st: can I generate my own bootstrap weights for survey data?
- From: jpitblado@stata.com (Jeff Pitblado, StataCorp LP)
- Re: st: Zero-inflated Poisson/Negative Binomial for survey data
- From: jpitblado@stata.com (Jeff Pitblado, StataCorp LP)
- RE: st: Bell Curve of Predicted Values
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- RE: st: Bell Curve of Predicted Values
- From: Randall <anewone23@yahoo.com>
- Re: st: markov transition model
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: markov transition model
- From: Carol Bao <yanjunbb@yahoo.com>
- st: Zero-inflated Poisson/Negative Binomial for survey data
- From: "Yu, Binbing (IMS)" <YuB@imsweb.com>
- st: New programs for differential item function (DIF) and for PARSCALE
- From: Laura Gibbons <gibbonsl@u.washington.edu>
- st: How to estimate panel data with both stationary and trend stationaryvariables?
- From: "Thuy Le" <tl6775a@american.edu>
- st: mata function : coding optional argument
- From: "U.A.QU.AP" <uaquap@gnet.tn>
- [no subject]
- From: "U.A.QU.AP" <uaquap@gnet.tn>
- Re: st: Weird problem with nested functions in Mata
- From: wgould@stata.com (William Gould, Stata)
- Re: st: can I generate my own bootstrap weights for survey data?
- From: "Stas Kolenikov" <skolenik@gmail.com>
- Re: st: Tobit regression where left vs right censoring cannot be determined in the preferred dependent variable
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: Tobit regression where left vs right censoring cannot be determined in the preferred dependent variable
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- Re: st: Bell Curve of Predicted Values
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- RE: st: Bell Curve of Predicted Values
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: Tobit regression where left vs right censoring cannot be determined in the preferred dependent variable
- RE: st: Bell Curve of Predicted Values
- From: "Scott Merryman" <smerryman@kc.rr.com>
- Re: st: Bell Curve of Predicted Values
- From: Randall <anewone23@yahoo.com>
- Re: st: Bootstrapped errors valid?
- From: "Stas Kolenikov" <skolenik@gmail.com>
- RE: st: duplicates tagged, but list is not limited to unique values
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: RE: -surface- still the only one for 3D graphs?
- From: "Nick Cox" <n.j.cox@durham.ac.uk>
- st: basic string operations
- From: Kit Baum <kitbaum@mac.com>
- Re: st: basic string operations
- From: "Ada Ma" <heu034@googlemail.com>
- Re: st: basic string operations
- From: Ronnie Babigumira <rb.glists@gmail.com>
- st: basic string operations
- From: "Alexander Nervedi" <alexnerdy@hotmail.com>
- st: Does Stata Talk to Matlab?
- From: "Alexander Nervedi" <alexnerdy@hotmail.com>
- Re: st: duplicates tagged, but list is not limited to unique values
- From: Michael McCulloch <mm@pinest.org>
- Re: st: duplicates tagged, but list is not limited to unique values
- From: "Clive Nicholas" <Clive.Nicholas@newcastle.ac.uk>
- st: statalist-digest V4 #2308
- From: <e.breeze@public-health.ucl.ac.uk>
- st: Bootstrapped errors valid?
- From: "Jake Kendall" <kendall_jake@hotmail.com>
- st: lo-mackinlay variance ratio test
- From: "Tomasz Stepniak" <tomasz_stepniak@hotmail.com>
- st: Update to -moremata- on SSC
- From: "Ben Jann" <ben.jann@soz.gess.ethz.ch>
- st: RE: time-dependent variables in survival analysis
- From: "Ben Jann" <ben.jann@soz.gess.ethz.ch>
- st: duplicates tagged, but list is not limited to unique values
- From: Michael McCulloch <mm@pinest.org>
- st: Fifth North American Stata Users Group Meetings, Boston, July 2006
- From: Kit Baum <baum@bc.edu>
- RE: st: combining data sets with different dimensions
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: time-dependent variables in survival analysis
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: -surface- still the only one for 3D graphs?
- From: "Judith Saebel" <Judith.Saebel@unisa.edu.au>
- st: can I generate my own bootstrap weights for survey data?
- From: "Dongyi Du" <ddu001@gmail.com>
- Re: st: Trimming data and statistics
- From: "Akihito Tokuhara" <akitoku4@hotmail.com>
- st: time-dependent variables in survival analysis
- From: "Stephan Michelson" <deltarex@mchsi.com>
- RE: st: combining data sets with different dimensions
- From: "Marino, Jennifer" <jmarino@fhcrc.org>
- st: Stata 9.2
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- Re: st: combining data sets with different dimensions
- From: Kremena Platikanova <Kremena.Platikanova@colorado.edu>
- Re: st: Trimming data and statistics
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: Trimming data and statistics
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: pkcross - labeling error
- From: ymarchenko@stata.com (Yulia Marchenko, StataCorp)
- Re: st: Bell Curve of Predicted Values
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: combining data sets with different dimensions
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- Re: st: Weird problem with nested functions in Mata
- From: "Clive Nicholas" <Clive.Nicholas@newcastle.ac.uk>
- st: combining data sets with different dimensions
- From: Kremena Platikanova <Kremena.Platikanova@colorado.edu>
- RE: st: Truncated variable names with Summarize
- From: "Akihito Tokuhara" <akitoku4@hotmail.com>
- Re: st: Truncated variable names with Summarize
- From: "David Merriman" <dmerrim@luc.edu>
- Re: st: Truncated variable names with Summarize
- From: Fred Wolfe <fwolfe@arthritis-research.org>
- st: Truncated variable names with Summarize
- From: "David Merriman" <dmerrim@luc.edu>
- Re: st: Trimming data and statistics
- From: "Akihito Tokuhara" <akitoku4@hotmail.com>
- Re: st: Weird problem with nested functions in Mata
- From: "Michael Blasnik" <michael.blasnik@verizon.net>
- RE: st: RE: Statistical test comparing two nonindependent variances?
- From: "Anderson, Bradley J" <BAnderson1@lifespan.org>
- st: Bell Curve of Predicted Values
- From: Randall <anewone23@yahoo.com>
- Re: st: RE: Statistical test comparing two nonindependent variances?
- From: "Austin Nichols" <austinnichols@gmail.com>
- Re: st: Estimating a model allowing for AR(1) in residuals withweights in panel
- From: Tak-wai Chau <twchau@frontiernet.net>
- RE: st: RE: Rép. : st: RE: formatting and exporting ttest results
- From: "Akihito Tokuhara" <akitoku4@hotmail.com>
- Re: st: Trimming data and statistics
- From: "Akihito Tokuhara" <akitoku4@hotmail.com>
- st: RE: Statistical test comparing two nonindependent variances?
- From: "Anderson, Bradley J" <BAnderson1@lifespan.org>
- Re: st: pkcross - labeling error
- From: Ricardo Ovaldia <ovaldia@yahoo.com>
- Re: st: Trimming data and statistics
- From: Maarten buis <maartenbuis@yahoo.co.uk>
- st: Autocorrelation Test for OLS with Panel Corrected Standard Errors
- From: HYOJOUNG KIM <hyojoung@u.washington.edu>
- st: statalist-digest V4 #2306
- From: <e.breeze@public-health.ucl.ac.uk>
- st: Trimming data and statistics
- From: "Akihito Tokuhara" <akitoku4@hotmail.com>
- st: is there a tweak on xtgee that can handlepolytomous/multinomial dependent variable?
- From: "Erick Turner" <turnere@ohsu.edu>
- RE: st: Weird problem with nested functions in Mata
- From: "Ben Jann" <ben.jann@soz.gess.ethz.ch>
- RE: st: ordinal response variables in logistic regression
- From: "Jian Liu" <jliu@brocku.ca>
- Re: st: ordinal response variables in logistic regression
- From: Richard Williams <Richard.A.Williams.5@ND.edu>
- st: ordinal response variables in logistic regression
- From: "Jian Liu" <jliu@brocku.ca>
- Re: st: RE: RE: More on F test and the translog
- From: "Michael S. Hanson" <mshanson@mac.com>
