Stata: Data Analysis and Statistical Software

Notice: On April 23, 2014, Statalist moved from an email list to a forum, based at statalist.org.

• Re: st: Looping with regression controls
  • From: David Hoaglin <[email protected]>
• Re: st: SE erroes for xtmixed-predict fitted
  • From: Steve Samuels <[email protected]>
• st: QR IVs and Cluster Robust bootstrap for bsqreg
  • From: Abekah Nkrumah <[email protected]>
• st: QR IVs and Cluster Robust Bootstrap for bsqreg
  • From: Abekah Nkrumah <[email protected]>
• Re: st: Looping with regression controls
  • From: Steve Samuels <[email protected]>
• Re: st: SE erroes for xtmixed-predict fitted
  • From: Steve Samuels <[email protected]>
• Re: st: Looping with regression controls
  • From: Nick Cox <[email protected]>
• Re: st: RE: intreg with fixed effects and clustered standard errors
  • From: Stas Kolenikov <[email protected]>
• Re: st: RE: intreg with fixed effects and clustered standard errors
  • From: Nick Cox <[email protected]>
• Re: st: data management question
  • From: Nick Cox <[email protected]>
• Re: st: data management question
  • From: 千早 ケンジ <[email protected]>
• st: data management question
  • From: Maria Cecilia Vieira da Silva <[email protected]>
• st: Looping with regression controls
  • From: Ras Dondo <[email protected]>
• Re: st: Propensity Score Matching
  • From: Steve Samuels <[email protected]>
• Re: st: Power estimation in Cox ph model
  • From: Steve Samuels <[email protected]>
• st: RE: Hessian trigger "too many literals" error with "ml model"
  • From: <[email protected]>
• Re: st: Box-Cox Tobit
  • From: Mekhola Chatterjee <[email protected]>
• Re: st: Truncated and Censored Normal Distribution
  • From: Danny Dan <[email protected]>
• Re: st: RE: intreg with fixed effects and clustered standard errors
  • From: Pamela Campa <[email protected]>
• st: RE: intreg with fixed effects and clustered standard errors
  • From: Nick Cox <[email protected]>
• Re: st: intreg with fixed effects and clustered standard errors
  • From: Paul Norris <[email protected]>
• st: intreg with fixed effects and clustered standard errors
  • From: Pamela Campa <[email protected]>
• RE: st: Power estimation in Cox ph model
  • From: "ZHIVIN Sergey" <[email protected]>
• Re: st: time-trend in correlation equation
  • From: Oliver Jones <[email protected]>
• Re: st: SE erroes for xtmixed-predict fitted
  • From: Ricardo Ovaldia <[email protected]>
• st: RE: using IV estimation with spatial econometrics
  • From: "Schaffer, Mark E" <[email protected]>
• st: SSC Archive
  • From: Christopher Baum <[email protected]>
• RE: st: Propensity Score Matching
  • From: <[email protected]>
• Re: st: command for non linear decomposition using a multinimial logit
  • From: Maarten Buis <[email protected]>
• st: New version of -somersd- on SSC
  • From: "Roger B. Newson" <[email protected]>
• RE: st: copying a string variable to all rows within a group
  • From: Nick Cox <[email protected]>
• Re: st: copying a string variable to all rows within a group
  • From: <[email protected]>
• Re: st: copying a string variable to all rows within a group
  • From: <[email protected]>
• st: command for non linear decomposition using a multinimial logit
  • From: arlette simo fotso <[email protected]>
• Re: st: MIXLPRED: marginal effects after-MIXLOGIT-
  • From: Arne Risa Hole <[email protected]>
• Re: st: copying a string variable to all rows within a group
  • From: Nick Cox <[email protected]>
• Re: st: Re: problem with split command
  • From: Prakash Singh <[email protected]>
• Re: st: RE: RE: Using ivhettest to test for heterogeneity
  • From: Nick Cox <[email protected]>
• Re: st: Re: problem with split command
  • From: Nick Cox <[email protected]>
• st: RE: RE: Using ivhettest to test for heterogeneity
  • From: [email protected]
• Re: st: copying a string variable to all rows within a group
  • From: Nick Cox <[email protected]>
• st: MIXLPRED: marginal effects after-MIXLOGIT-
  • From: nagi kayo <[email protected]>
• st: copying a string variable to all rows within a group
  • From: <[email protected]>
• Re: st: Propensity Score Matching
  • From: Marco Ventura <[email protected]>
• Re: st: Re: problem with split command
  • From: Prakash Singh <[email protected]>
• st: Re: problem with split command
  • From: "Joseph Coveney" <[email protected]>
• st: Re: problem with split command
  • From: "Joseph Coveney" <[email protected]>
• st: problem with split command
  • From: Prakash Singh <[email protected]>
• Re: st: SE erroes for xtmixed-predict fitted
  • From: Steve Samuels <[email protected]>
• Re: st: SE erroes for xtmixed-predict fitted
  • From: Ricardo Ovaldia <[email protected]>
• st: using IV estimation with spatial econometrics
  • From: "Henrique Neder" <[email protected]>
• Re: st: RE: test command for categorical variables in survey data
  • From: Steve Samuels <[email protected]>
• Re: st: Power estimation in Cox ph model
  • From: Steve Samuels <[email protected]>
• Re: st: SE erroes for xtmixed-predict fitted
  • From: Steve Samuels <[email protected]>
• st: SE erroes for xtmixed-predict fitted
  • From: Ricardo Ovaldia <[email protected]>
• Re: st: Counter-intuitive overflow behavior
  • From: "Roger B. Newson" <[email protected]>
• Re: st: RE: New package -wridit- on SSC
  • From: "Roger B. Newson" <[email protected]>
• RE: st: RE: New package -wridit- on SSC
  • From: Nick Cox <[email protected]>
• Re: st: Counter-intuitive overflow behavior
  • From: "William Gould, StataCorp LP" <[email protected]>
• Re: st: RE: New package -wridit- on SSC
  • From: "Seed, Paul" <[email protected]>
• st: RE: RE: Using ivhettest to test for heterogeneity
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: Datamanagement: warning when using infile with optional if
  • From: David Kantor <[email protected]>
• Re: st: Datamanagement: warning when using infile with optional if
  • From: Nick Cox <[email protected]>
• RE: st: Datamanagement: warning when using infile with optional if
  • From: <[email protected]>
• Re: st: Datamanagement: warning when using infile with optional if
  • From: Nick Cox <[email protected]>
• st: Datamanagement: warning when using infile with optional if
  • From: <[email protected]>
• st: RE: Weighted 2SLS
  • From: "Schaffer, Mark E" <[email protected]>
• st: Weighted 2SLS
  • From: Daniel Brown <[email protected]>
• Re: st: Bootstrapping factor loadings
  • From: Nick Cox <[email protected]>
• Re: st: Bootstrapping factor loadings
  • From: Nick Cox <[email protected]>
• st: Power estimation in Cox ph model
  • From: "ZHIVIN Sergey" <[email protected]>
• st: Bootstrapping factor loadings
  • From: "Grant, Robert" <[email protected]>
• Re: st: Truncated and Censored Normal Distribution
  • From: Nick Cox <[email protected]>
• Re: st: RE: Interval Regression Heckman
  • From: "Bernini, Michele" <[email protected]>
• st: RE: Interval Regression Heckman
  • From: "David Roodman ([email protected])" <[email protected]>
• st: Interval Regression Heckman
  • From: "Bernini, Michele" <[email protected]>
• Re: st: Moderated mediation with multilevel data
  • From: Stas Kolenikov <[email protected]>
• Re: st: Moderated mediation with multilevel data
  • From: "Casey P. Durand" <[email protected]>
• RE: st: Moderated mediation with multilevel data
  • From: Cameron McIntosh <[email protected]>
• st: multilevel random effects added to -cmp-
  • From: "David Roodman ([email protected])" <[email protected]>
• st: Moderated mediation with multilevel data
  • From: Kris Anderson <[email protected]>
• st: Counter-intuitive overflow behavior
  • From: "Roger B. Newson" <[email protected]>
• st: Trying to understand output of postestimation tools for mutlivariable fractional polynomial modelling
  • From: vikas singh <[email protected]>
• re:st: Cox "logrank" test after propensity score weighting
  • From: "Ariel Linden. DrPH" <[email protected]>
• st: Truncated and Censored Normal Distribution
  • From: Danny Dan <[email protected]>
• Re: st: Stata with MacVim
  • From: Gabi Huiber <[email protected]>
• st: RE: Propensity Score Matching
  • From: "Millimet, Daniel" <[email protected]>
• st: RE: xtivreg2 and pweights
  • From: "Schaffer, Mark E" <[email protected]>
• st: Propensity Score Matching
  • From: <[email protected]>
• st: xtivreg2 and pweights
  • From: Paulo Regis <[email protected]>
• Re: st: RE: New package -wridit- on SSC
  • From: "Roger B. Newson" <[email protected]>
• st: RE: New package -wridit- on SSC
  • From: Nick Cox <[email protected]>
• st: RE: double quotes in var label error findname(ssc)
  • From: Nick Cox <[email protected]>
• AW: st: double quotes in var label error findname(ssc)
  • From: "Kaulisch, Marc" <[email protected]>
• st: time-trend in correlation equation
  • From: Bülent Köksal <[email protected]>
• Re: st: double quotes in var label error findname(ssc)
  • From: Muhammad Anees <[email protected]>
• Re: st: violating normality assumption for tobit
  • From: "Grant, Robert" <[email protected]>
• st: double quotes in var label error findname(ssc)
  • From: "Kaulisch, Marc" <[email protected]>
• st: New package -wridit- on SSC
  • From: "Roger B. Newson" <[email protected]>
• st: RE: Using ivhettest to test for heterogeneity
  • From: [email protected]
• Re: st: Box-Cox Tobit
  • From: Muhammad Anees <[email protected]>
• Re: st: Box-Cox Tobit
  • From: Mekhola Chatterjee <[email protected]>
• Re: st: Box-Cox Tobit
  • From: Muhammad Anees <[email protected]>
• Re: st: Box-Cox Tobit
  • From: Muhammad Anees <[email protected]>
• st: Box-Cox Tobit
  • From: Mekhola Chatterjee <[email protected]>
• st: Cox "logrank" test after propensity score weighting
  • From: Adam Olszewski <[email protected]>
• Re:st:stubs, ending with some number, are not available for all waves :-reshape-
  • From: Clyde B Schechter <[email protected]>
• Re: st: Dfbeta in Cox regression post-estimation with Stata 10.1
  • From: Annibale Cois <[email protected]>
• Re: RE: st: Random Effects Probit by Maximum Simulated Likelihood
  • From: [email protected]
• Re: st: Stata Transfer question
  • From: Muhammad Anees <[email protected]>
• Re: st: Stata Transfer question
  • From: Steve Samuels <[email protected]>
• Re: st: Confounding using chest
  • From: Jennifer Calder <[email protected]>
• st: Stata Transfer question
  • From: Jet <[email protected]>
• st: trying to understand output of stata command fracplot
  • From: vikas singh <[email protected]>
• Re: st: Confounding using chest
  • From: Maarten Buis <[email protected]>
• Re: st:stubs, ending with some number, are not available for all waves :-reshape-
  • From: Amanda Fu <[email protected]>
• st: Datasets earn2b.dta and accidents2.dta from Drukker, "Using margins," Italian SUG 2010
  • From: Bert Lloyd <[email protected]>
• Re: st: Dfbeta in Cox regression post-estimation with Stata 10.1
  • From: Steve Samuels <[email protected]>
• Re: st:stubs, ending with some number, are not available for all waves :-reshape-
  • From: daniel klein <[email protected]>
• Re: st:stubs, ending with some number, are not available for all waves :-reshape-
  • From: Nick Cox <[email protected]>
• Re: st: Performance histograms
  • From: Maarten Buis <[email protected]>
• st: Interval regression with selection
  • From: "Bernini, Michele" <[email protected]>
• re: st: Stata procedure for RD density test
  • From: "Ariel Linden. DrPH" <[email protected]>
• st: Confounding using chest
  • From: Jennifer Calder <[email protected]>
• st: Performance histograms
  • From: "Huerta, Tim" <[email protected]>
• st:stubs, ending with some number, are not available for all waves :-reshape-
  • From: Amanda Fu <[email protected]>
• Re: st: Re: Probability threshold for inclusion in ZINB count model
  • From: Stas Kolenikov <[email protected]>
• st: Re: Probability threshold for inclusion in ZINB count model
  • From: Jeremy Bowling <[email protected]>
• Re: st: Compute distance to all observations in a group
  • From: Fernando Luco <[email protected]>
• Re: st: foreach loop over all variables
  • From: Tim Wade <[email protected]>
• Re: st: Compute distance to all observations in a group
  • From: Robert Picard <[email protected]>
• Re: st: Econometrics Using Stata Online Course
  • From: Muhammad Anees <[email protected]>
• st: Compute distance to all observations in a group
  • From: Fernando Luco <[email protected]>
• Re: st: Econometrics Using Stata Online Course
  • From: Marcello Pagano <[email protected]>
• Re: st: foreach loop over all variables
  • From: John Antonakis <[email protected]>
• st: using "tobexog" with panel data
  • From: Michael Mulcahy <[email protected]>
• st: GMM estimation and Helmert procedure
  • From: Abubakr Saeed <[email protected]>
• st: using "tobexog" with panel data
  • From: Michael Mulcahy <[email protected]>
• RE: st: Random Effects Probit by Maximum Simulated Likelihood
  • From: Cameron McIntosh <[email protected]>
• RE: st: violating normality assumption for tobit
  • From: Cameron McIntosh <[email protected]>
• st: Dfbeta in Cox regression post-estimation with Stata 10.1
  • From: Annibale Cois <[email protected]>
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: Francesco <[email protected]>
• Re: st: Probability threshold for inclusion in ZINB count model
  • From: Nick Cox <[email protected]>
• Re: st: Reshape Long r(101) Error
  • From: Nick Cox <[email protected]>
• st: Econometrics Using Stata Online Course
  • From: Muhammad Anees <[email protected]>
• st: Probability threshold for inclusion in ZINB count model
  • From: Jeremy Bowling <[email protected]>
• Re: st: Program to simulate AR(1) time series and return autocorrelations
  • From: Robson Glasscock <[email protected]>
• re: st: Reshape Long r(101) Error
  • From: [email protected]
• Re: st: Program to simulate AR(1) time series and return autocorrelations
  • From: Nick Cox <[email protected]>
• Re: st: number of distinct values for a variable in a group using -collapse-
  • From: Nick Cox <[email protected]>
• st: Stata procedure for RD density test
  • From: "Krichevskiy, Dmitriy" <[email protected]>
• Re: st: Obtaining correct inference from within strata -att- estimation with -psmatch2-
  • From: Richard Herron <[email protected]>
• st: RE: Using ivhettest to test for heterogeneity
  • From: "Schaffer, Mark E" <[email protected]>
• st: read in file with varying # of observations
  • From: Caleb Southworth <[email protected]>
• Re: st: testing difference in partial coefficients with -test-
  • From: David Greenberg <[email protected]>
• re: Re: st: RE: Panel data: large number of linear time trends
  • From: Christopher Baum <[email protected]>
• Re: st: Herfindahl-Hirschman Index
  • From: Austin Nichols <[email protected]>
• Re: st: Obtaining correct inference from within strata -att- estimation with -psmatch2-
  • From: Austin Nichols <[email protected]>
• st: Using ivhettest to test for heterogeneity
  • From: [email protected]
• st: Herfindahl-Hirschman Index
  • From: EconFinalist1 <[email protected]>
• Re: st: Problem while running a simple OLS regression
  • From: Louison CF <[email protected]>
• Re: st: RE: Panel data: large number of linear time trends
  • From: Austin Nichols <[email protected]>
• Re: st: Problem while running a simple OLS regression
  • From: Austin Nichols <[email protected]>
• Re: st: number of distinct values for a variable in a group using -collapse-
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: Program to simulate AR(1) time series and return autocorrelations
  • From: brandon lebeau <[email protected]>
• st: number of distinct values for a variable in a group using -collapse-
  • From: Lloyd Dumont <[email protected]>
• st: Problem while running a simple OLS regression
  • From: Louison CF <[email protected]>
• re: st: RE: Panel data: large number of linear time trends
  • From: Christopher Baum <[email protected]>
• st: Obtaining correct inference from within strata -att- estimation with -psmatch2-
  • From: Richard Herron <[email protected]>
• Re: st: mosaic plot with an intensity dimension
  • From: Austin Nichols <[email protected]>
• st: RE: Panel data: large number of linear time trends
  • From: Nick Cox <[email protected]>
• Re: st: violating normality assumption for tobit
  • From: Austin Nichols <[email protected]>
• st: Panel data: large number of linear time trends
  • From: William Gui Woolston <[email protected]>
• st: extracting select saved results using column names
  • From: Ben Cooper <[email protected]>
• st: bivariate probit and generalised residuals
  • From: Emilia Del Bono <[email protected]>
• st: RE: mosaic plot with an intensity dimension
  • From: Nick Cox <[email protected]>
• st: Random Effects Probit by Maximum Simulated Likelihood
  • From: [email protected]
• st: mosaic plot with an intensity dimension
  • From: "Dimitriy V. Masterov" <[email protected]>
• RE: st: Select a particular test
  • From: "Peci, Adriana (OAHPP)" <[email protected]>
• st: A general tip: look carefully to see where -egen- allows expressions as arguments
  • From: Nick Cox <[email protected]>
• RE: st: Select a particular test
  • From: Nick Cox <[email protected]>
• Re: st: Removing the overall variable label and using only variable value in sts graph
  • From: Clinton Thompson <[email protected]>
• st: RE: RE: RE: RE: RE: RE: looping to value of a variable
  • From: Richard Fox <[email protected]>
• st: RE: Removing the overall variable label and using only variable value in sts graph
  • From: Tim Evans <[email protected]>
• Re: st: Removing the overall variable label and using only variable value in sts graph
  • From: Nick Cox <[email protected]>
• st: Removing the overall variable label and using only variable value in sts graph
  • From: Tim Evans <[email protected]>
• SV: st: truncreg with linear restriction
  • From: Stefan Öberg <[email protected]>
• Re: st: RE: RE: RE: RE: RE: looping to value of a variable
  • From: Nick Cox <[email protected]>
• Re: st: Select a particular test
  • From: Nick Cox <[email protected]>
• st: clustering SE xtprobit and xtgee
  • From: "Roberto GANAU" <[email protected]>
• Re: st: violating normality assumption for tobit
  • From: Nick Cox <[email protected]>
• st: testing difference in partial coefficients with -test-
  • From: Martin Engeler <[email protected]>
• st: violating normality assumption for tobit
  • From: Raymond Lim <[email protected]>
• Re: st: gmm and a panel data set
  • From: Muhammad Anees <[email protected]>
• Re: st: Select a particular test
  • From: Nick Cox <[email protected]>
• Re: st: Comparing strings within the same variable
  • From: Francisco Morales <[email protected]>
• st: Select a particular test
  • From: "Peci, Adriana (OAHPP)" <[email protected]>
• Re: st: gmm and a panel data set
  • From: "Brian P. Poi" <[email protected]>
• st: gmm and a panel data set
  • From: "Marder, Andrew" <[email protected]>
• Re: st: Missing (partial) records from ODBC load command
  • From: "Dimitriy V. Masterov" <[email protected]>
• Re: st: Missing (partial) records from ODBC load command
  • From: Austin Nichols <[email protected]>
• st: Missing (partial) records from ODBC load command
  • From: "Pi, Ron" <[email protected]>
• Re: st: Comparing strings within the same variable
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: Comparing strings within the same variable
  • From: [email protected]
• re: st: tsset error codes
  • From: Christopher Baum <[email protected]>
• re: Re: st: stata 12 installation on mac osx
  • From: Christopher Baum <[email protected]>
• re: st: tsset error codes
  • From: Christopher Baum <[email protected]>
• RE: st: smart averaging
  • From: Nick Cox <[email protected]>
• st: RE: test command for categorical variables in survey data
  • From: Nanlesta Pilgrim <[email protected]>
• st: RE: Mata run time error r(3499)
  • From: Nick Cox <[email protected]>
• st: Mata run time error r(3499)
  • From: Ebru Öztürk <[email protected]>
• Re: st: truncreg with linear restriction
  • From: Austin Nichols <[email protected]>
• st: RE: semi variogram Graph???
  • From: Nick Cox <[email protected]>
• st: RE: RE: RE: RE: RE: looping to value of a variable
  • From: Nick Cox <[email protected]>
• RE: st: tsset error codes
  • From: William Hart <[email protected]>
• RE: st: tsset error codes
  • From: Nick Cox <[email protected]>
• st: RE: tsset error codes
  • From: Nick Cox <[email protected]>
• st: Marginal Effects after Tobit
  • From: Danny Dan <[email protected]>
• st: truncreg with linear restriction
  • From: Stefan Öberg <[email protected]>
• Re: st: Controlling for atrittion in panel, or creating a panel without atrittion
  • From: Laurie Molina <[email protected]>
• Re: st: tsset error codes
  • From: Maarten Buis <[email protected]>
• RE: st: tsset error codes
  • From: William Hart <[email protected]>
• st: tsset error codes
  • From: William Hart <[email protected]>
• Re: st: cox regression values
  • From: Maarten Buis <[email protected]>
• st: cox regression values
  • From: Luisa Soares-Miranda <[email protected]>
• st: semi variogram Graph???
  • From: Ajita Atreya <[email protected]>
• Re: st: stata 12 installation on mac osx
  • From: Lars Folkestad <[email protected]>
• Re: st: stata 12 installation on mac osx
  • From: William Buchanan <[email protected]>
• st: RE: RE: RE: RE: looping to value of a variable
  • From: Richard Fox <[email protected]>
• Re: st: stata 12 installation on mac osx
  • From: Richard Goldstein <[email protected]>
• Re: st: Question on esttab
  • From: Maarten Buis <[email protected]>
• Re: st: Question on esttab
  • From: Alberto R Osella <[email protected]>
• st: Re: R: How to take into account correlation in Logistic regression using Stata
  • From: "Tiago V. Pereira" <[email protected]>
• st: Dear All
  • From: Alberto R Osella <[email protected]>
• st: Question on esttab
  • From: Alberto R Osella <[email protected]>
• Re: st: stata 12 installation on mac osx
  • From: Phil Clayton <[email protected]>
• Re: st: Controlling for atrittion in panel, or creating a panel without atrittion
  • From: [email protected] (Brendan Halpin)
• st: RE: RE: RE: looping to value of a variable
  • From: Nick Cox <[email protected]>
• st: stata 12 installation on mac osx
  • From: Lars Folkestad <[email protected]>
• st: RE: RE: Week handling broken in Stata, how to customize week handling
  • From: Nick Cox <[email protected]>
• Re: st: foreach loop over all variables
  • From: Benjamin Volland <[email protected]>
• st: foreach loop over all variables
  • From: "Seliger Florian" <[email protected]>
• st: RE: Week handling broken in Stata, how to customize week handling
  • From: Charles Vellutini <[email protected]>
• st: R: How to take into account correlation in Logistic regression using Stata
  • From: <[email protected]>
• st: RE: RE: looping to value of a variable
  • From: Richard Fox <[email protected]>
• st: weak instrument test for xtdpd?
  • From: Jian Zhang <[email protected]>
• st: Week handling broken in Stata, how to customize week handling
  • From: James Sams <[email protected]>
• st: command xtdpd: different sets of Instrumental variables get different estimated results
  • From: Jian Zhang <[email protected]>
• Re: st: smart averaging
  • From: Francisco Morales <[email protected]>
• st: Controlling for atrittion in panel, or creating a panel without atrittion
  • From: Laurie Molina <[email protected]>
• Re: st: smart averaging
  • From: Fernando Rios Avila <[email protected]>
• st: smart averaging
  • From: Murat Mercan <[email protected]>
• st: How to take into account correlation in Logistic regression using Stata
  • From: "Tiago V. Pereira" <[email protected]>
• Re: st: Slowing Stata down
  • From: Alan Riley <[email protected]>
• RE: st: RE: Slowing Stata down
  • From: Laura Gibbons <[email protected]>
• RE: st: RE: Slowing Stata down
  • From: "David Radwin" <[email protected]>
• Re: st: How to take into account correlation in Logistic regression using Stata
  • From: Francisco Morales <[email protected]>
• Re: st: RE: Slowing Stata down
  • From: Laura Gibbons <[email protected]>
• st: RE: Slowing Stata down
  • From: "Sarah Edgington" <[email protected]>
• Re: st: Stata/MP8
  • From: Rodrigo Briceño <[email protected]>
• st: Stata/MP8
  • From: Karen Strope <[email protected]>
• st: tobit for placement data with heavy right truncation
  • From: Raymond Lim <[email protected]>
• RE: st: asclogit interactions correction
  • From: Liz Lyons <[email protected]>
• st: Slowing Stata down
  • From: Laura Gibbons <[email protected]>
• Re: st: ODBC: drop down menu vs. command line
  • From: Thomas Speidel <[email protected]>
• Re: st: Simulating time series with if else condition
  • From: [email protected]
• Re: st: Breadwinner variable
  • From: Austin Nichols <[email protected]>
• st: RE: Breadwinner variable
  • From: Nick Cox <[email protected]>
• st: Breadwinner variable
  • From: Peter Gambrill <[email protected]>
• st: How to take into account correlation in Logistic regression using Stata
  • From: "Tiago V. Pereira" <[email protected]>
• Re: st: missing factor variables in table of estimates
  • From: [email protected] (Jeff Pitblado, StataCorp LP)
• Re: st: ODBC: drop down menu vs. command line
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: ODBC: drop down menu vs. command line
  • From: Thomas Speidel <[email protected]>
• st: RE: looping to value of a variable
  • From: Nick Cox <[email protected]>
• st: RE: Mata run time error r(3499)
  • From: Nick Cox <[email protected]>
• Re: st: To: [email protected]
  • From: Steven Archambault <[email protected]>
• st: Mata run time error r(3499)
  • From: Ebru Öztürk <[email protected]>
• st: RE: run stata on macbook air
  • From: "David Radwin" <[email protected]>
• st: New version of -geonear-; updated helpfile for -geodist-
  • From: Robert Picard <[email protected]>
• st: looping to value of a variable
  • From: Richard Fox <[email protected]>
• Re: st: command for non linear decomposition using a multinimial logit
  • From: Austin Nichols <[email protected]>
• Re: st: command for non linear decomposition using a multinimial logit
  • From: Stas Kolenikov <[email protected]>
• Re: st: xtoverid
  • From: Muhammad Anees <[email protected]>
• Re: st: xtoverid
  • From: Phil Clayton <[email protected]>
• st: xtoverid
  • From: "Loncar, Dejan" <[email protected]>
• Re: st: Thread-Index: AczxXtYwD2VOTYqASdGGftzjvCHPSg==
  • From: Phil Clayton <[email protected]>
• Re: st: clock function accuracy
  • From: Emmanouil Mentzakis <[email protected]>
• re: Re: st: error ocurred loading .ado file (ccmatch.ado)
  • From: Christopher Baum <[email protected]>
• Re: st: clock function accuracy
  • From: Phil Clayton <[email protected]>
• Re: st: clock function accuracy
  • From: Phil Clayton <[email protected]>
• Re: st: error ocurred loading .ado file (ccmatch.ado)
  • From: Phil Clayton <[email protected]>
• st: clock function accuracy
  • From: Emmanouil Mentzakis <[email protected]>
• st: Thread-Index: AczxXtYwD2VOTYqASdGGftzjvCHPSg==
  • From: Stig Lønberg Nielsen <[email protected]>
• Re: st: error ocurred loading .ado file (ccmatch.ado)
  • From: Benjamin Niug <[email protected]>
• Re: st: error ocurred loading .ado file (ccmatch.ado)
  • From: Benjamin Niug <[email protected]>
• Re: st: command for non linear decomposition using a multinimial logit
  • From: Maarten Buis <[email protected]>
• Re: st: error ocurred loading .ado file (ccmatch.ado)
  • From: Nick Cox <[email protected]>
• Re: st: error ocurred loading .ado file (ccmatch.ado)
  • From: Nick Cox <[email protected]>
• Re: st: error ocurred loading .ado file (ccmatch.ado)
  • From: Phil Clayton <[email protected]>
• Re: st: error ocurred loading .ado file (ccmatch.ado)
  • From: Benjamin Niug <[email protected]>
• Re: st: error ocurred loading .ado file (ccmatch.ado)
  • From: Muhammad Anees <[email protected]>
• st: error ocurred loading .ado file (ccmatch.ado)
  • From: Benjamin Niug <[email protected]>
• st: command for non linear decomposition using a multinimial logit
  • From: arlette simo fotso <[email protected]>
• st: Re: run Stata on macbook air
  • From: Christopher Baum <[email protected]>
• Re: st: Re: calculating proportions
  • From: Oliver Jones <[email protected]>
• Re: st: run stata on macbook air
  • From: Lars Folkestad <[email protected]>
• Re: st: RE: Test of Normality and Heteroskedasticity
  • From: Danny Dan <[email protected]>
• st: run stata on macbook air
  • From: Caleb Southworth <[email protected]>
• Re: st: To: [email protected]
  • From: Muyang Zhang <[email protected]>
• st: To: [email protected]
  • From: Sara Anderson <[email protected]>
• Re: st: Simulating time series with if else condition
  • From: Nick Cox <[email protected]>
• re: st: Simulating time series with if else condition
  • From: Christopher Baum <[email protected]>
• re: st: Simulating time series with if else condition
  • From: Christopher Baum <[email protected]>
• RE: st: Which inverter? (was: RE: RE: ivreg2 weak-id statistic and quadratic terms)
  • From: "Schaffer, Mark E" <[email protected]>
• st: Simulating time series with if else condition
  • From: [email protected]
• st: population weights question
  • From: Kyleigh Schraeder <[email protected]>
• Re: st: Which inverter? (was: RE: RE: ivreg2 weak-id statistic and quadratic terms)
  • From: Richard Gates <[email protected]>
• Re: st: Disappearing Statalist posts (was: RE: RE: RE: Which inverter? (was: RE: RE: ivreg2 weak-id statistic and quadratic terms))
  • From: Nick Cox <[email protected]>
• st: Disappearing Statalist posts (was: RE: RE: RE: Which inverter? (was: RE: RE: ivreg2 weak-id statistic and quadratic terms))
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: Re: calculating proportions
  • From: Nick Cox <[email protected]>
• RE: st: Which inverter? (was: RE: RE: ivreg2 weak-id statistic and quadratic terms)
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: Re: calculating proportions
  • From: Nick Cox <[email protected]>
• st: RE: RE: Which inverter? (was: RE: RE: ivreg2 weak-id statistic and quadratic terms)
  • From: DE SOUZA Eric <[email protected]>
• Re: st: Re: calculating proportions
  • From: Nick Cox <[email protected]>
• Re: st: AW: population weights question
  • From: Kyleigh Schraeder <[email protected]>
• Re: st: Re: calculating proportions
  • From: Ekaterina Hertog <[email protected]>
• st: AW: population weights question
  • From: Reinhardt Jan Dietrich <[email protected]>
• re: st: Propensity Score Matching
  • From: "Ariel Linden. DrPH" <[email protected]>
• Re: st: Re: calculating proportions
  • From: Ekaterina Hertog <[email protected]>
• Re: st: Which inverter? (was: RE: RE: ivreg2 weak-id statistic and quadratic terms)
  • From: Scott Merryman <[email protected]>
• Re: st: Re: calculating proportions
  • From: Nick Cox <[email protected]>
• st: missing factor variables in table of estimates
  • From: Lloyd Dumont <[email protected]>
• Re: st: Re: calculating proportions
  • From: Ekaterina Hertog <[email protected]>
• st: population weights question
  • From: Kyleigh Schraeder <[email protected]>
• Re: st: Re: calculating proportions
  • From: Pathmeswaran <[email protected]>
• Re: st: Re: calculating proportions
  • From: Oliver Jones <[email protected]>
• RE: st: names in -svmat- or -xsvmat-
  • From: "Feiveson, Alan H. (JSC-SK311)" <[email protected]>
• Re: st: names in -svmat- or -xsvmat-
  • From: "Roger B. Newson" <[email protected]>
• Re: st: names in -svmat- or -xsvmat-
  • From: Nick Cox <[email protected]>
• Re: st: names in -svmat- or -xsvmat-
  • From: Nick Cox <[email protected]>
• Re: st: names in -svmat- or -xsvmat-
  • From: Scott Merryman <[email protected]>
• re: st: names in -svmat- or -xsvmat-
  • From: Christopher Baum <[email protected]>
• st: Re: calculating proportions
  • From: Pathmeswaran <[email protected]>
• st: names in -svmat- or -xsvmat-
  • From: "Feiveson, Alan H. (JSC-SK311)" <[email protected]>
• Re: st: transforming observations
  • From: Nick Cox <[email protected]>
• st: transforming observations
  • From: Mintewab Bezabih <[email protected]>
• st: What does "The effect is significant" after xtprobit mean:examining ALL three effects?
  • From: Amanda Fu <[email protected]>
• Re: st: scale parameter in glm
  • From: Suryadipta Roy <[email protected]>
• st: RE: Which inverter? (was: RE: RE: ivreg2 weak-id statistic and quadratic terms)
  • From: "Schaffer, Mark E" <[email protected]>
• st: New version of -fvregen- on SSC
  • From: "Roger B. Newson" <[email protected]>
• st: New version of -xsvmat- on SSC
  • From: "Roger B. Newson" <[email protected]>
• st: Specification tests and mi
  • From: "Filipe Grilo" <[email protected]>
• st: STATA MP
  • From: Chiara Mussida <[email protected]>
• Re: st: calculating proportions
  • From: Oliver Jones <[email protected]>
• st: update margdistfit
  • From: Maarten Buis <[email protected]>
• Re: st: What does "The effect is significant" after xtprobit mean:examining ALL three effects?
  • From: Maarten Buis <[email protected]>
• st: scale parameter in glm
  • From: Marco Ventura <[email protected]>
• [no subject]
  • From: Unknown
• st: What does "The effect is significant" after xtprobit mean:examining ALL three effects?
  • From: Amanda Fu <[email protected]>
• Re: st: RE: RE: Transform source table to edgelist (or nodelist)
  • From: Steve Sauerwald <[email protected]>
• Re: st: RE: statalist-digest V4 #4433
  • From: Steve Samuels <[email protected]>
• st: Which inverter? (was: RE: RE: ivreg2 weak-id statistic and quadratic terms)
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: RE: calculating proportions
  • From: Nick Cox <[email protected]>
• Re: st: calculating proportions
  • From: Ekaterina Hertog <[email protected]>
• Re: st: RE: calculating proportions
  • From: Ekaterina Hertog <[email protected]>
• st: RE: ivreg2 weak-id statistic and quadratic terms
  • From: "Schaffer, Mark E" <[email protected]>
• st: ivreg2 weak-id statistic and quadratic terms
  • From: Miros Lav <[email protected]>
• Re: st: marginsplot error: margins not uniquely identified
  • From: Molly Moore Jeffery <[email protected]>
• Re: st: Converting annual data to quarterly data
  • From: urbain thierry YOGO <[email protected]>
• Re: st: RE: RE: Transform source table to edgelist (or nodelist)
  • From: Robert Picard <[email protected]>
• st: SV: RE: linear approximation - impute "missing" years
  • From: Miriam Wüst <[email protected]>
• st: RE: linear approximation - impute "missing" years
  • From: Nick Cox <[email protected]>
• st: linear approximation - impute "missing" years
  • From: Miriam Wüst <[email protected]>
• Re: st: merging datasets
  • From: Kyleigh Schraeder <[email protected]>
• Re: st: Converting annual data to quarterly data
  • From: Muhammad Anees <[email protected]>
• Re: st: merging datasets
  • From: Steve Samuels <[email protected]>
• st: combining datasets with population weights
  • From: Kyleigh Schraeder <[email protected]>
• st: multivariate normal probabilities and restricted cholesky matrix
  • From: saqlain raza <[email protected]>
• st: Inteff graph
  • From: Andreas Schädel <[email protected]>
• st: RE: Converting annual data to quarterly data
  • From: Nick Cox <[email protected]>
• st: Converting annual data to quarterly data
  • From: Muhammad Akram <[email protected]>
• Re: st: Re: weighted time dependent Cox model
  • From: Steve Samuels <[email protected]>
• st: RE: RE: Transform source table to edgelist (or nodelist)
  • From: Nick Cox <[email protected]>
• Re: st: calculating proportions
  • From: Oliver Jones <[email protected]>
• st: RE: calculating proportions
  • From: Nick Cox <[email protected]>
• st: calculating proportions
  • From: Ekaterina Hertog <[email protected]>
• st: Propensity Score Matching
  • From: vikramfinavker <[email protected]>
• st: RE: Transform source table to edgelist (or nodelist)
  • From: Nick Cox <[email protected]>
• Re: st: Estimation parameters from Logit to matrix
  • From: Diego Bellavia <[email protected]>
• st: Transform source table to edgelist (or nodelist)
  • From: Steve Sauerwald <[email protected]>
• Re: st: Interval regression: Categories with 100% censoring
  • From: [email protected]
• st: RE: Re: weighted time dependent Cox model
  • From: "Scholes, Shaun" <[email protected]>
• Re: st: Estimation parameters from Logit to matrix
  • From: Maarten Buis <[email protected]>
• st: Re: weighted time dependent Cox model
  • From: Ehsan Karim <[email protected]>
• Re: st: Interval regression: Categories with 100% censoring
  • From: Stas Kolenikov <[email protected]>
• Re: st: Propensity Score Matching
  • From: David Kantor <[email protected]>
• Re: st: Reshape Long r(101) Error
  • From: Nick Cox <[email protected]>
• st: merging datasets
  • From: Kyleigh Schraeder <[email protected]>
• st: tests with xtmixed and small number of groups
  • From: Alan Acock <[email protected]>
• st: Estimation parameters from Logit to matrix
  • From: Diego Bellavia <[email protected]>
• st: Stacked plots of cumulative incidence functions for multinominal covariates
  • From: Kenji Chihaya <[email protected]>
• st: RE: statalist-digest V4 #4433
  • From: "Seed, Paul" <[email protected]>
• RE: st: Propensity Score Matching
  • From: Cameron McIntosh <[email protected]>
• st: Interval regression: Categories with 100% censoring
  • From: [email protected]
• re: st: Propensity Score Matching
  • From: "Ariel Linden. DrPH" <[email protected]>
• st: Reshape Long r(101) Error
  • From: [email protected]
• Re: st: error when using felsdvregdm
  • From: Nick Cox <[email protected]>
• st: error when using felsdvregdm
  • From: Prashant <[email protected]>
• Re: st: weighted time dependent Cox model
  • From: Steve Samuels <[email protected]>
• Re: st: Organizing non-ranked multiple responses by generating new variable
  • From: Nick Cox <[email protected]>
• Re: st: weighted time dependent Cox model
  • From: Steve Samuels <[email protected]>
• st: weighted time dependent Cox model
  • From: Ehsan Karim <[email protected]>
• st: Organizing non-ranked multiple responses by generating new variable
  • From: JD Wright <[email protected]>
• st: Propensity Score Matching
  • From: vikramfinavker <[email protected]>
• st: 3 level xtmelogit woes
  • From: William Hauser <[email protected]>
• st: marginsplot error: margins not uniquely identified
  • From: Molly Moore Jeffery <[email protected]>
• st: RE: Cant reply to my own posts
  • From: DE SOUZA Eric <[email protected]>
• st: Get Companion matrix of eigenvalues saved by amat option
  • From: Muhammad Akram <[email protected]>
• Re: st: -cluster kmeans- with -weight- or -svyset-
  • From: [email protected] (Brendan Halpin)
• Re: st: RE: RE: IPUMS data open issue
  • From: [email protected]
• Re: st: Cant reply to my own posts
  • From: Alessandro Freire <[email protected]>
• RE: st: Cant reply to my own posts
  • From: "Nakelse, Tebila (AfricaRice)" <[email protected]>
• st: -cluster kmeans- with -weight- or -svyset-
  • From: David Cefskimal <[email protected]>
• Re: st: Cant reply to my own posts
  • From: Richard Williams <[email protected]>
• st: Cant reply to my own posts
  • From: vikramfinavker <[email protected]>
• st: NLLS to GMM
  • From: penarol49 <[email protected]>
• Re: st: survival analysis help
  • From: Steve Samuels <[email protected]>
• st: survival analysis help
  • From: Eugene DePasquale <[email protected]>
• st: Graph overlay marker labels over bars and lines
  • From: "Mills, Michael" <[email protected]>
• st: inverse logit of gamma and xtfrontier
  • From: Scott Merryman <[email protected]>
• Re: st: Predicting fitted values from xtivreg2 with fixed effects (xtivreg2 [...], fe)
  • From: Richard Herron <[email protected]>
• st: RE: RE: local macro and xtmixed in stata 12 giving diff results
  • From: Nick Cox <[email protected]>
• st: RE: local macro and xtmixed in stata 12 giving diff results
  • From: Nick Cox <[email protected]>
• Re: st: Bootstrapping, Robust and Weight options in regress
  • From: Danny Dan <[email protected]>
• st: local macro and xtmixed in stata 12 giving diff results
  • From: Clara Barata <[email protected]>
• Re: st: RE: RE: Fwd: Minimum in 24 hours
  • From: Paul McCabe <[email protected]>
• st: RE: RE: Fwd: Minimum in 24 hours
  • From: Nick Cox <[email protected]>
• Re: Re: Re: Re: st: Situation where multiple imputation may be of no use?
  • From: Clyde B Schechter <[email protected]>
• RE: Re: st: Comparing similar strings
  • From: Nick Cox <[email protected]>
• st: RE: Fwd: Minimum in 24 hours
  • From: Nick Cox <[email protected]>
• Re: Re: st: Comparing similar strings
  • From: Clyde B Schechter <[email protected]>
• Re: st: GLLAMM -- soprobit link
  • From: Stas Kolenikov <[email protected]>
• Re: st: Bootstrapping, Robust and Weight options in regress
  • From: Stas Kolenikov <[email protected]>
• st: Fwd: Minimum in 24 hours
  • From: Paul McCabe <[email protected]>
• st: RE: GLLAMM -- soprobit link
  • From: Reinhardt Jan Dietrich <[email protected]>
• Re: st: hierarchical logistic regression command
  • From: Richard Williams <[email protected]>
• st: GLLAMM -- soprobit link
  • From: George Bouliotis <[email protected]>
• Re: st: Bootstrapping, Robust and Weight options in regress
  • From: Danny Dan <[email protected]>
• RE: st: Reading NetCDF files
  • From: Steven Dubnoff <[email protected]>
• st: dprobit & Full Information Maximum Likelihood
  • From: nil sen <[email protected]>
• Re: st: Bootstrapping, Robust and Weight options in regress
  • From: Stas Kolenikov <[email protected]>
• st: Bootstrapping, Robust and Weight options in regress
  • From: Danny Dan <[email protected]>
• st: Predicting fitted values from xtivreg2 with fixed effects (xtivreg2 [...], fe)
  • From: Andreas Nilsson <[email protected]>
• Re: st: Foreach looping code for generating a Quantiles variable for each two digit sic code
  • From: Jaime Laird <[email protected]>
• st: How to implement FGLS on estimated regression coefficients?
  • From: Michael Boehm <[email protected]>
• Re: st: Foreach looping code for generating a Quantiles variable for each two digit sic code
  • From: Nick Cox <[email protected]>
• Re: st: RE: RE: IPUMS data open issue
  • From: Nick Cox <[email protected]>
• Re: st: RE: RE: IPUMS data open issue
  • From: Nils Braakmann <[email protected]>
• Re: st: RE: RE: IPUMS data open issue
  • From: Phil Clayton <[email protected]>
• Re: st: RE: creating loops using combinations of variables
  • From: Zeynep Ozkok <[email protected]>
• Re: st: Foreach looping code for generating a Quantiles variable for each two digit sic code
  • From: Jaime Laird <[email protected]>
• Re: st: Foreach looping code for generating a Quantiles variable for each two digit sic code
  • From: Nick Cox <[email protected]>
• Re: st: RE: RE: IPUMS data open issue
  • From: Nick Cox <[email protected]>
• st: Foreach looping code for generating a Quantiles variable for each two digit sic code
  • From: Jaime Laird <[email protected]>
• Re: st: RE: RE: IPUMS data open issue
  • From: Phil Clayton <[email protected]>
• Re: st: RE: RE: IPUMS data open issue
  • From: Edgar Munoz <[email protected]>
• Re: st: RE: RE: IPUMS data open issue
  • From: Nick Cox <[email protected]>
• st: RE: RE: IPUMS data open issue
  • From: "Ferro,Gabrielle A" <[email protected]>
• st: Statalist commandments
  • From: Nick Cox <[email protected]>
• RE: st: calculate alpha after polychoric factor analysis
  • From: <[email protected]>
• Re: st: Comparing similar strings
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: RE: IPUMS data open issue
  • From: Nick Cox <[email protected]>
• Re: st: Comparing similar strings
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: Comparing similar strings
  • From: "Daniel S." <[email protected]>
• Re: st: Last estimates not found error
  • From: Jaime Laird <[email protected]>
• st: RE: SimpleSlopes in Multilevel Models
  • From: "Bontempo, Daniel E" <[email protected]>
• Re: st: Last estimates not found error
  • From: Austin Nichols <[email protected]>
• st: IPUMS data open issue
  • From: "Ferro,Gabrielle A" <[email protected]>
• st: Date: Thu, 16 Feb 2012 17:39:38 +0000
  • From: "Daniel S." <[email protected]>
• Re: st: Last estimates not found error
  • From: Jaime Laird <[email protected]>
• Re: st: Last estimates not found error
  • From: Austin Nichols <[email protected]>
• Re: st: RE: xtabond2 for 2 DVs -- xtivreg2
  • From: Austin Nichols <[email protected]>
• Re: st: RE: xtabond2 for 2 DVs -- xtivreg2
  • From: Austin Nichols <[email protected]>
• Re: st: RE: xtabond2 for 2 DVs -- xtivreg2
  • From: Lisa Marie Yarnell <[email protected]>
• RE: st: hierarchical logistic regression command
  • From: Nick Cox <[email protected]>
• Re: st: adding observation of means of variables
  • From: Abhimanyu Arora <[email protected]>
• st: --estadd vif-- for --xtreg--
  • From: "Narahari H.S." <[email protected]>
• RE: st: hierarchical logistic regression command
  • From: Maria Niarchou <[email protected]>
• RE: st: Reading NetCDF files
  • From: Nick Cox <[email protected]>
• RE: st: adding observation of means of variables
  • From: Nick Cox <[email protected]>
• st: MS Outlook 2007 settings for posting to Statalist [was: RE: output to excel (specific location)]
  • From: Nick Cox <[email protected]>
• Re: st: adding observation of means of variables
  • From: Abhimanyu Arora <[email protected]>
• Re: st: hierarchical logistic regression command
  • From: Maarten Buis <[email protected]>
• RE: st: RE: creating loops using combinations of variables
  • From: Nick Cox <[email protected]>
• st: RE: xtabond2 for 2 DVs -- xtivreg2
  • From: "Schaffer, Mark E" <[email protected]>
• RE: st: adding observation of means of variables
  • From: Nick Cox <[email protected]>
• Re: st: Meta-analysis pooling relative risk from relative risks possible?
  • From: David Hoaglin <[email protected]>
• Re: st: adding observation of means of variables
  • From: Abhimanyu Arora <[email protected]>
• Re: st: RE: creating loops using combinations of variables
  • From: Zeynep Ozkok <[email protected]>
• Re: st: output to excel (specific location)
  • From: Phil Clayton <[email protected]>
• RE: st: adding observation of means of variables
  • From: Nick Cox <[email protected]>
• st: output to excel (specific location)
  • From: Richard Fox <[email protected]>
• Re: st: RE: creating loops using combinations of variables
  • From: Zeynep Ozkok <[email protected]>
• st: explaining where user-written programs come from [was: RE: RE: RE: xtfevd]
  • From: Nick Cox <[email protected]>
• Re: st: adding observation of means of variables
  • From: Abhimanyu Arora <[email protected]>
• Re: st: Reading NetCDF files
  • From: Gordon Hughes <[email protected]>
• Re: st: adding observation of means of variables
  • From: Phil Clayton <[email protected]>
• st: RE: RE: xtfevd
  • From: Murat Genc <[email protected]>
• RE: st: hierarchical logistic regression command
  • From: Maria Niarchou <[email protected]>
• st: adding observation of means of variables
  • From: Abhimanyu Arora <[email protected]>
• Re: st: <xtreg, fe> and unbalanced panels
  • From: Francesco <[email protected]>
• Re: st: hierarchical logistic regression command
  • From: Maarten Buis <[email protected]>
• st: <xtreg, fe> and unbalanced panels
  • From: mai7777 <[email protected]>
• st: RE: xtfevd
  • From: Nick Cox <[email protected]>
• st: hierarchical logistic regression command
  • From: Maria Niarchou <[email protected]>
• Re: st: AW: Meta-analysis pooling relative risk from relative risks possible?
  • From: "Roger B. Newson" <[email protected]>
• st: RE: creating loops using combinations of variables
  • From: Nick Cox <[email protected]>
• st: AW: Meta-analysis pooling relative risk from relative risks possible?
  • From: "Trelle Sven" <[email protected]>
• st: xtfevd
  • From: Murat Genc <[email protected]>
• st: RE: Meta-analysis pooling relative risk from relative risks possible?
  • From: Philip Ryan <[email protected]>
• Re: st: Test of parameter equality between two seemingly unrelated regressions
  • From: Michael Boehm <[email protected]>
• st: creating loops using combinations of variables
  • From: Zeynep Ozkok <[email protected]>
• Re: st: Composite measures
  • From: Nick Cox <[email protected]>
• st: Meta-analysis pooling relative risk from relative risks possible?
  • From: Sofia Ramiro <[email protected]>
• Re: st: Test of parameter equality between two seemingly unrelated regressions
  • From: Maarten Buis <[email protected]>
• st: Last estimates not found error
  • From: Jaime Laird <[email protected]>
• st: xtabond2 for 2 DVs -- xtivreg2
  • From: Lisa Marie Yarnell <[email protected]>
• Re: st: RE: could be simple but I don't get the error message on range
  • From: Nirina F <[email protected]>
• Re: st: Composite measures
  • From: William Buchanan <[email protected]>
• Re: st: Composite measures
  • From: Alessandro Freire <[email protected]>
• RE: st: xtabond2 for 2 DVs?
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: Test of parameter equality between two seemingly unrelated regressions
  • From: Michael Boehm <[email protected]>
• st: Estimating a dynamic limited dependent variable model (xtabond)
  • From: Alex Safavi <[email protected]>
• Re: st: Test of parameter equality between two seemingly unrelated regressions
  • From: Michael Boehm <[email protected]>
• RE: st: Execution of code out of the Stata Do-File-Editor: File not found
  • From: "Tiago V. Pereira" <[email protected]>
• Re: st: Reading NetCDF files
  • From: Andrew Dyck <[email protected]>
• Re: st: Test of parameter equality between two seemingly unrelated regressions
  • From: Maarten Buis <[email protected]>
• st: Test of parameter equality between two seemingly unrelated regressions
  • From: Michael Boehm <[email protected]>
• Re: Re: Re: st: Situation where multiple imputation may be of no use?
  • From: Maarten Buis <[email protected]>
• Re: st: How many observations can Stata 11 handle?
  • From: Austin Nichols <[email protected]>
• Re: Re: Re: st: Situation where multiple imputation may be of no use?
  • From: Stas Kolenikov <[email protected]>
• Re: st: Reading NetCDF files
  • From: Erik Lindsley <[email protected]>
• Re: st: How many observations can Stata 11 handle?
  • From: Richard Williams <[email protected]>
• Re: st: How many observations can Stata 11 handle?
  • From: Stas Kolenikov <[email protected]>
• Re: st: How many observations can Stata 11 handle?
  • From: Maarten Buis <[email protected]>
• Re: st: How many observations can Stata 11 handle?
  • From: Richard Williams <[email protected]>
• st: Update to stpm2
  • From: "Lambert, Paul C. (Dr.)" <[email protected]>
• st: How many observations can Stata 11 handle?
  • From: Tunga Kantarcı <[email protected]>
• st: New version of -somersd- on SSC
  • From: "Roger B. Newson" <[email protected]>
• st: New version of -xsvmat- on SSC
  • From: "Roger B. Newson" <[email protected]>
• Re: st: clarity on varsoc command
  • From: Muhammad Anees <[email protected]>
• st: bootstrap and derived dummy variable
  • From: Erasmo Giambona <[email protected]>
• RE: st: Composite measures
  • From: Nick Cox <[email protected]>
• Re: st: Composite measures
  • From: Alessandro Freire <[email protected]>
• Re: st: clarity on varsoc command
  • From: "Michael Ndlovu" <[email protected]>
• RE: st: Calendar weeks
  • From: Nick Cox <[email protected]>
• st: Alternate to Hausman
  • From: "Ali Karim" <[email protected]>
• Re: st: Execution of code out of the Stata Do-File-Editor: File not found
  • From: Felix Meickmann <[email protected]>
• RE: st: Calendar weeks
  • From: Charles Vellutini <[email protected]>
• st: RE: By with forvalues
  • From: Nick Cox <[email protected]>
• RE: st: Execution of code out of the Stata Do-File-Editor: File not found
  • From: "Tiago V. Pereira" <[email protected]>
• st: By with forvalues
  • From: Jorge Alé Chilet <[email protected]>
• Re: st: clarity on varsoc command
  • From: Maarten Buis <[email protected]>
• Re: st: clarity on varsoc command
  • From: "Michael Ndlovu" <[email protected]>
• Re: st: RE: Calendar weeks
  • From: Nick Cox <[email protected]>
• Re: st: Calendar weeks
  • From: Nick Cox <[email protected]>
• st: RE: Calendar weeks
  • From: Charles Vellutini <[email protected]>
• st: Calendar weeks
  • From: Charles Vellutini <[email protected]>
• st: clarity on varsoc command
  • From: "Michael Ndlovu" <[email protected]>
• Re: st: RE: could be simple but I don't get the error message on range
  • From: Nick Cox <[email protected]>
• st: RE: could be simple but I don't get the error message on range
  • From: "Jesper Lindhardsen" <[email protected]>
• st: could be simple but I don't get the error message on range
  • From: Nirina F <[email protected]>
• st: asclogit with choice choice sets that vary across individuals
  • From: Maria Ana Vitorino <[email protected]>
• RE: st: calculate alpha after polychoric factor analysis
  • From: Cameron McIntosh <[email protected]>
• RE: st: Fitting a linear regression with interval (inequality) constraints using nl
  • From: Cameron McIntosh <[email protected]>
• RE: st: calculate alpha after polychoric factor analysis
  • From: Cameron McIntosh <[email protected]>
• Re: st: calculate alpha after polychoric factor analysis
  • From: "Joseph Coveney" <[email protected]>
• RE: st: Composite measures
  • From: Cameron McIntosh <[email protected]>
• st: Generating Y variable immitating another regression's parameters
  • From: Duru <[email protected]>
• st: exporting formulas from stata to excel
  • From: Eric Stradley <[email protected]>
• Re: st: ANOVAs and Probability Weights
  • From: Steve Samuels <[email protected]>
• Re: st: ANOVAs and Probability Weights
  • From: Steve Samuels <[email protected]>
• Re: st: Fitting a linear regression with interval (inequality) constraints using nl
  • From: Nick Cox <[email protected]>
• Re: st: Working with aggregated data / exporting results to excel
  • From: Nick Cox <[email protected]>
• Re: st: xtabond2 for 2 DVs?
  • From: David Greenberg <[email protected]>
• st: Percentage points vs log points
  • From: Derya Karaci <[email protected]>
• st: xtabond2 for 2 DVs?
  • From: Lisa Marie Yarnell <[email protected]>
• st: Execution of code out of the Stata Do-File-Editor: File not found
  • From: Felix Meickmann <[email protected]>
• Re: st: drop multiple observations which are strings
  • From: [email protected] (Brendan Halpin)
• Re: st: Composite measures
  • From: Maarten Buis <[email protected]>
• Re: Re: Re: st: Situation where multiple imputation may be of no use?
  • From: Clyde B Schechter <[email protected]>
• st: drop multiple observations which are strings
  • From: Shubhabrata Mukherjee <[email protected]>
• st: Working with aggregated data / exporting results to excel
  • From: "Puddicombe, David" <[email protected]>
• st: Reading NetCDF files
  • From: Gordon Hughes <[email protected]>
• st: Composite measures
  • From: Alessandro Freire <[email protected]>
• st: Fitting a linear regression with interval (inequality) constraints using nl
  • From: "Lieke Boonen (SiRM)" <[email protected]>
• Re: st: using post stratification weights
  • From: Stas Kolenikov <[email protected]>
• re: st: RDD robustness check: Controlling for covariates?
  • From: "Ariel Linden, DrPH" <[email protected]>
• RE: st: using post stratification weights
  • From: Afif Naeem <[email protected]>
• Re: st: mixed
  • From: Clyde B Schechter <[email protected]>
• st: RE: xtmixed
  • From: "Hoffman, George" <[email protected]>
• st: xtabond2 for multiple dependent variables?
  • From: Lisa Marie Yarnell <[email protected]>
• Re: st: SV: RDD robustness check: Controlling for covariates?
  • From: Austin Nichols <[email protected]>
• st: Capturing text and numbers
  • From: "Narahari H.S." <[email protected]>
• st: Computing the Gini or another inequality coefficient from a limited number of data points
  • From: <[email protected]>
• Re: st: RE: combining reliability trial data
  • From: Hilary Taylor <[email protected]>
• st: SV: RDD robustness check: Controlling for covariates?
  • From: Miriam Wüst <[email protected]>
• st: -fmm- update
  • From: Partha Deb <[email protected]>
• st: xtmixed
  • From: Erik Carter <[email protected]>
• Re: st: IRF interpretation
  • From: Muhammad Anees <[email protected]>
• Re: st: ANOVAs and Probability Weights
  • From: "[email protected]" <[email protected]>
• Re: st: Zeros and measures of inequality or concentration
  • From: David Hoaglin <[email protected]>
• Re: st: ANOVAs and Probability Weights
  • From: Steve Samuels <[email protected]>
• Re: st: Zeros and measures of inequality or concentration
  • From: Troy Payne <[email protected]>
• Re: st: Recursively build local macro with "" around each addition
  • From: Richard Herron <[email protected]>
• Re: st: Recursively build local macro with "" around each addition
  • From: Nick Cox <[email protected]>
• st: Recursively build local macro with "" around each addition
  • From: Richard Herron <[email protected]>
• st: Multilevel Multinomial Logistic regression with few level 1 units
  • From: Richard Benton <[email protected]>
• Re: st: RE: combining reliability trial data
  • From: Nick Cox <[email protected]>
• st: IRF interpretation
  • From: Muhammad Akram <[email protected]>
• Re: st: using post stratification weights
  • From: Stas Kolenikov <[email protected]>
• st: RE: combining reliability trial data
  • From: Nick Cox <[email protected]>
• RE: st: using post stratification weights
  • From: Afif Naeem <[email protected]>
• Re: st: identifying duplicate records
  • From: "William Gould, StataCorp LP" <[email protected]>
• re: st: Mediation for a left-censored dependent variable and ordinal mediator variable
  • From: "Ariel Linden, DrPH" <[email protected]>
• Re: st: Including fixed effects in a panel regression
  • From: Fernando Rios Avila <[email protected]>
• st: combining reliability trial data
  • From: Hilary Taylor <[email protected]>
• st: RDD robustness check: Controlling for covariates?
  • From: Jen Zhen <[email protected]>
• RE: st: Including fixed effects in a panel regression
  • From: Alec Minnema <[email protected]>
• st: Including fixed effects in a panel regression
  • From: Krzysztof Gajewski <[email protected]>
• st: marginal effects on gllamm with link(ologit) option
  • From: ramesh <[email protected]>
• Re: st: gologit2 and mlogit coefficients do not agree
  • From: "Garth Rauscher" <[email protected]>
• Re: st: calculate alpha after polychoric factor analysis
  • From: <[email protected]>
• Re: st: calculate alpha after polychoric factor analysis
  • From: Stas Kolenikov <[email protected]>
• Re: st: marginal effects + bivariate probit + permutation test
  • From: saqlain raza <[email protected]>
• st: calculate alpha after polychoric factor analysis
  • From: <[email protected]>
• RE: st: Use of -marginsplot- to plot predicted non linear combination of coefficients
  • From: Charles Vellutini <[email protected]>
• RE: st: xtivreg without constant?
  • From: Ozgur Ererdem <[email protected]>
• st: Gllamm multinominal logit model estimation problems
  • From: Alec Minnema <[email protected]>
• RE: st: why Margins gives "not estimable" ?
  • From: Austin Black <[email protected]>
• st: marginal effects + bivariate probit + permutation test
  • From: margherita Comola <[email protected]>
• Re: st: Use of -marginsplot- to plot predicted non linear combination of coefficients
  • From: Maarten Buis <[email protected]>
• Re: st: How to vertically align graphs with Stata 12 ?
  • From: Francesco <[email protected]>
• Re: st: Zeros and measures of inequality or concentration
  • From: Nick Cox <[email protected]>
• Re: st: How to vertically align graphs with Stata 12 ?
  • From: Nick Cox <[email protected]>
• Re: st: gologit2 and mlogit coefficients do not agree
  • From: Richard Williams <[email protected]>
• st: Mediation for a left-censored dependent variable and ordinal mediator variable
  • From: Vijay Sampath <[email protected]>
• st: ANOVAs and Probability Weights
  • From: "[email protected]" <[email protected]>
• Re: st: gologit2 and mlogit coefficients do not agree
  • From: Richard Williams <[email protected]>
• st: gologit2 and mlogit coefficients do not agree
  • From: "Rauscher, Garth" <[email protected]>
• Re: st: using post stratification weights
  • From: Steve Samuels <[email protected]>
• [no subject]
  • From: Unknown
• Re: st: xtivreg without constant?
  • From: Christopher Baum <[email protected]>
• st: xtivreg without constant?
  • From: Ozgur Ererdem <[email protected]>
• Re: st: using post stratification weights
  • From: Sunil Kumar <[email protected]>
• re: st: Which matching command works best?
  • From: "Ariel Linden, DrPH" <[email protected]>
• Re: st: How to vertically align graphs with Stata 12 ?
  • From: Francesco <[email protected]>
• RE: st: using post stratification weights
  • From: Afif Naeem <[email protected]>
• st: Use of -marginsplot- to plot predicted non linear combination of coefficients
  • From: Charles Vellutini <[email protected]>
• st: New program -usesome- available from SSC
  • From: daniel klein <[email protected]>
• st: RE: statalist-digest V4 #4425
  • From: <[email protected]>
• Re: st: How to vertically align graphs with Stata 12 ?
  • From: Nick Cox <[email protected]>
• re: Re: st: Best way to export a simple Stata model
  • From: Christopher Baum <[email protected]>
• Re: st: glm model syntax
  • From: Nikolaos Pandis <[email protected]>
• AW: st: why Margins gives "not estimable" ?
  • From: Reinhardt Jan Dietrich <[email protected]>
• st: How to vertically align graphs with Stata 12 ?
  • From: Francesco <[email protected]>
• Re: st: glm model syntax
  • From: Nick Cox <[email protected]>
• Re: st: Best way to export a simple Stata model
  • From: daniel klein <[email protected]>
• st: glm model syntax
  • From: Nikolaos Pandis <[email protected]>
• Re: st: Svy commands for cluster sampling
  • From: Steve Samuels <[email protected]>
• Re: st: Best way to export a simple Stata model
  • From: "Dimitriy V. Masterov" <[email protected]>
• RE: st: RE: Test of Normality and Heteroskedasticity
  • From: Cameron McIntosh <[email protected]>
• Re: st: RE: Test of Normality and Heteroskedasticity
  • From: Danny Dan <[email protected]>
• Re: st: using post stratification weights
  • From: Steve Samuels <[email protected]>
• RE: Subject: RE: st: Situation where multiple imputation may be of no use?
  • From: Cameron McIntosh <[email protected]>
• Re: st: using post stratification weights
  • From: Steve Samuels <[email protected]>
• Subject: RE: st: Situation where multiple imputation may be of no use?
  • From: Clyde B Schechter <[email protected]>
• st: RE: heteroskedasticity-robust standard errors using "xtivreg2, fe"
  • From: "Schaffer, Mark E" <[email protected]>
• st: Specification tests and mi
  • From: "Filipe Grilo" <[email protected]>
• st: recursive bivariate probit and insignificant rho
  • From: David Quinn <[email protected]>
• Re: st: why Margins gives "not estimable" ?
  • From: Francesco <[email protected]>
• Re: st: RE: RE: rearrange table#2 -add variables
  • From: Nick Cox <[email protected]>
• RE: st: using post stratification weights
  • From: Afif Naeem <[email protected]>
• Re: st: Validity of ivreg2-tests for underidentification and weak instruments if errors are not i.i.d. etc.
  • From: Anne Tausch <[email protected]>
• RE: st: why Margins gives "not estimable" ?
  • From: Cameron McIntosh <[email protected]>
• Re: st: using post stratification weights
  • From: Stas Kolenikov <[email protected]>
• RE: st: Validity of ivreg2-tests for underidentification and weak instruments if errors are not i.i.d. etc.
  • From: "Schaffer, Mark E" <[email protected]>
• st: why Margins gives "not estimable" ?
  • From: Francesco <[email protected]>
• Re: st: RE: RE: rearrange table#2 -add variables
  • From: Nikolaos Pandis <[email protected]>
• Re: st: how to construct change in earnings since last election
  • From: Robson Glasscock <[email protected]>
• Re: st: Best way to export a simple Stata model
  • From: Maarten Buis <[email protected]>
• st: Which matching command works best?
  • From: Benjamin Niug <[email protected]>
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: "Joseph Coveney" <[email protected]>
• RE: st: Interaction model
  • From: Cameron McIntosh <[email protected]>
• RE: st: using post stratification weights
  • From: Cameron McIntosh <[email protected]>
• st: using post stratification weights
  • From: Afif Naeem <[email protected]>
• st: stset multiple-spell(recurrent) delayed entry
  • From: Rodrigo Alvarez <[email protected]>
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: Francesco <[email protected]>
• st: how to construct change in earnings since last election
  • From: hnbc1 <[email protected]>
• Re: st: RE: Manipulating tabulation output so rows are sorted by value of column...
  • From: Rieza Soelaeman <[email protected]>
• RE: st: Situation where multiple imputation may be of no use?
  • From: Cameron McIntosh <[email protected]>
• Re: st: Panel data with simultaneous equations
  • From: David Greenberg <[email protected]>
• re: Re: st: RE: Getting variable names in a matrix
  • From: Christopher Baum <[email protected]>
• Re: Re: st: Situation where multiple imputation may be of no use?
  • From: Clyde B Schechter <[email protected]>
• Re: st: RE: Getting variable names in a matrix
  • From: [email protected]
• Re: st: Interaction model
  • From: David Hoaglin <[email protected]>
• Re: st: identifying duplicate records
  • From: "Dimitriy V. Masterov" <[email protected]>
• re: st: Panel data with simultaneous equations
  • From: Christopher Baum <[email protected]>
• st: Validity of ivreg2-tests for underidentification and weak instruments if errors are not i.i.d. etc.
  • From: Anne Tausch <[email protected]>
• st: Panel data with simultaneous equations
  • From: Ayman Farahat <[email protected]>
• RE: st: identifying duplicate records
  • From: Nick Cox <[email protected]>
• st: RE: Getting variable names in a matrix
  • From: Nick Cox <[email protected]>
• Re: st: Computing the Gini or another inequality coefficient from a limited number of data points
  • From: Jen Zhen <[email protected]>
• Re: st: RE: rearrange table
  • From: Muhammad Anees <[email protected]>
• Re: st: Computing the Gini or another inequality coefficient from a limited number of data points
  • From: Austin Nichols <[email protected]>
• st: Best way to export a simple Stata model
  • From: "Dimitriy V. Masterov" <[email protected]>
• RE: st: RE: rearrange table
  • From: Muhammad Akram <[email protected]>
• Re: st: Computing the Gini or another inequality coefficient from a limited number of data points
  • From: Joerg Luedicke <[email protected]>
• RE: st: Interaction model
  • From: Lauren Beresford <[email protected]>
• Re: st: identifying duplicate records
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: RE: RE: RE: margins for subset of model coefficients w/o constant term
  • From: Reinhardt Jan Dietrich <[email protected]>
• st: RE: RE: margins for subset of model coefficients w/o constant term
  • From: "Feiveson, Alan H. (JSC-SK311)" <[email protected]>
• st: identifying duplicate records
  • From: raoul reulen <[email protected]>
• RE: st: RE: RE: rearrange table#2 -add variables
  • From: Nick Cox <[email protected]>
• st: Getting variable names in a matrix
  • From: [email protected]
• Re: st: RE: RE: rearrange table#2 -add variables
  • From: Nikolaos Pandis <[email protected]>
• RE: st: RE: rearrange table
  • From: Nick Cox <[email protected]>
• st: RE: RE: rearrange table
  • From: Nick Cox <[email protected]>
• Re: st: Computing the Gini or another inequality coefficient from a limited number of data points
  • From: Daniel Feenberg <[email protected]>
• Re: st: RE: rearrange table
  • From: Phil Clayton <[email protected]>
• st: RE: rearrange table
  • From: Nick Cox <[email protected]>
• st: Computing the Gini or another inequality coefficient from a limited number of data points
  • From: Jen Zhen <[email protected]>
• st: rearrange table
  • From: Nikolaos Pandis <[email protected]>
• Re: st: confirmatory factor analysis programs [was: RE: Stata support]
  • From: Nick Cox <[email protected]>
• Re: st: RE: using egen, total() with weights
  • From: Steve Samuels <[email protected]>
• Re: st: confirmatory factor analysis programs [was: RE: Stata support]
  • From: Nick Cox <[email protected]>
• Re: st: RE: using egen, total() with weights
  • From: Nick Cox <[email protected]>
• Re: st: RE: using egen, total() with weights
  • From: Steve Samuels <[email protected]>
• Re: st: confirmatory factor analysis programs [was: RE: Stata support]
  • From: "[email protected]" <[email protected]>
• Re: st: confirmatory factor analysis programs [was: RE: Stata support]
  • From: Stas Kolenikov <[email protected]>
• Re: st: confirmatory factor analysis programs [was: RE: Stata support]
  • From: Stas Kolenikov <[email protected]>
• Re: st: confirmatory factor analysis programs [was: RE: Stata support]
  • From: "[email protected]" <[email protected]>
• st: RE: Manipulating tabulation output so rows are sorted by value of column...
  • From: Nick Cox <[email protected]>
• RE: st: RE: using egen, total() with weights
  • From: Nick Cox <[email protected]>
• st: confirmatory factor analysis programs [was: RE: Stata support]
  • From: Nick Cox <[email protected]>
• Re: st: RE: using egen, total() with weights
  • From: Sheera Joy Olasky <[email protected]>
• Re: st: Stata support
  • From: Rieza Soelaeman <[email protected]>
• st: Manipulating tabulation output so rows are sorted by value of column...
  • From: Rieza Soelaeman <[email protected]>
• st: Stata support
  • From: "[email protected]" <[email protected]>
• st: RE: using egen, total() with weights
  • From: Nick Cox <[email protected]>
• st: using egen, total() with weights
  • From: Sheera Joy Olasky <[email protected]>
• st: Re: Merge problem; missing observation
  • From: Shubhabrata Mukherjee <[email protected]>
• Re: st: Situation where multiple imputation may be of no use?
  • From: Richard Williams <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Steve Samuels <[email protected]>
• st: variable thresholds in a ordered model
  • From: Ramiro Antonio Burga Villanueva <[email protected]>
• st: Situation where multiple imputation may be of no use?
  • From: Clyde B Schechter <[email protected]>
• Re: st: imputing data values using hotdeck
  • From: Richard Williams <[email protected]>
• Re: st: Re: Merge problem; missing observation
  • From: Anders Alexandersson <[email protected]>
• Re: st: Re: Merge problem; missing observation
  • From: Phil Clayton <[email protected]>
• st: Re: Merge problem; missing observation
  • From: Shubhabrata Mukherjee <[email protected]>
• st: RE: Merge problem; missing observation
  • From: Nick Cox <[email protected]>
• Re: st: Matching procedure based on shortest distance given latitudes and longitudes
  • From: Rüdiger Vollmeier <[email protected]>
• st: Merge problem; missing observation
  • From: Shubhabrata Mukherjee <[email protected]>
• RE: st: Matching procedure based on shortest distance given latitudes and longitudes
  • From: Nick Cox <[email protected]>
• Re: st: Matching procedure based on shortest distance given latitudes and longitudes
  • From: Robert Picard <[email protected]>
• Re: st: Matching procedure based on shortest distance given latitudes and longitudes
  • From: Rüdiger Vollmeier <[email protected]>
• Re: st: Matching procedure based on shortest distance given latitudes and longitudes
  • From: Rüdiger Vollmeier <[email protected]>
• st: RE: Adding Shaded Areas to Time Series Graph
  • From: Nick Cox <[email protected]>
• Re: st: state space model estimation in STATA
  • From: Richard Gates <[email protected]>
• st: imputing data values using hotdeck
  • From: "Krohmer, Anne (MDH)" <[email protected]>
• Re: st: Binary panel data questions
  • From: [email protected] (Brendan Halpin)
• Re: st: Binary panel data questions
  • From: Kim Peeters <[email protected]>
• st: RE: time varying covariate Cox regression
  • From: Tim Evans <[email protected]>
• Re: st: Matching procedure based on shortest distance given latitudes and longitudes
  • From: Robert Picard <[email protected]>
• Re: st: how can I merge two data sets over a range of values
  • From: Richard Warr <[email protected]>
• st: Bai and Perron test
  • From: Olalekan Aworinde <[email protected]>
• Re: st: Zeros and measures of inequality or concentration
  • From: Troy Payne <[email protected]>
• Re: st: how can I merge two data sets over a range of values
  • From: Nick Cox <[email protected]>
• RE: st: Output logistic regression results using outreg
  • From: Maria Cecilia Vieira da Silva <[email protected]>
• Re: st: Output logistic regression results using outreg
  • From: Alberto R Osella <[email protected]>
• st: Adding Shaded Areas to Time Series Graph
  • From: [email protected]
• Re: st: how can I merge two data sets over a range of values
  • From: Richard Warr <[email protected]>
• st: RE: margins for subset of model coefficients w/o constant term
  • From: Reinhardt Jan Dietrich <[email protected]>
• st: margins for subset of model coefficients w/o constant term
  • From: "Feiveson, Alan H. (JSC-SK311)" <[email protected]>
• RE: st: Output logistic regression results using outreg
  • From: Maria Cecilia Vieira da Silva <[email protected]>
• re: Re: st: MIXLOGIT: marginal effects
  • From: Christopher Baum <[email protected]>
• Re: st: Zeros and measures of inequality or concentration
  • From: "Roger B. Newson" <[email protected]>
• Re: st: Zeros and measures of inequality or concentration
  • From: David Hoaglin <[email protected]>
• st: state space model estimation in STATA
  • From: "Adjmal Sekander Sirak" <[email protected]>
• Re: st: Matching procedure based on shortest distance given latitudes and longitudes
  • From: [email protected] (Brendan Halpin)
• st: Zeros and measures of inequality or concentration
  • From: <[email protected]>
• st: Matching procedure based on shortest distance given latitudes and longitudes
  • From: Rüdiger Vollmeier <[email protected]>
• st: Valid and Relevant Instrument
  • From: Miguel Àngel García López <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Maarten Buis <[email protected]>
• Re: st: Zeros and measures of inequality or concentration
  • From: Nick Cox <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: [email protected] (Brendan Halpin)
• Re: Re: st: MIXLOGIT: marginal effects
  • From: Maarten Buis <[email protected]>
• st: heteroskedasticity-robust standard errors using "xtivreg2, fe"
  • From: Nina Neubecker <[email protected]>
• st: Svy commands for cluster sampling
  • From: Hajime SATO <[email protected]>
• Re: st: Output logistic regression results using outreg
  • From: Phil Clayton <[email protected]>
• Re: st: Tukey's HSD test from summary statistics
  • From: Muhammad Anees <[email protected]>
• st: Zeros and measures of inequality or concentration
  • From: Troy Payne <[email protected]>
• Re: st: Output logistic regression results using outreg
  • From: Richard Williams <[email protected]>
• Re: st: how can I merge two data sets over a range of values
  • From: David Radwin <[email protected]>
• RE: st: Interaction model
  • From: Cameron McIntosh <[email protected]>
• Re: st: Interaction model
  • From: David Hoaglin <[email protected]>
• Re: st: RE: a question on how to create a complex loop
  • From: Nick Cox <[email protected]>
• st: Output logistic regression results using outreg
  • From: Maria Cecilia Vieira da Silva <[email protected]>
• Re: Re: st: MIXLOGIT: marginal effects
  • From: Nick Cox <[email protected]>
• Re: Re: st: MIXLOGIT: marginal effects
  • From: Clive Nicholas <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Clive Nicholas <[email protected]>
• re: Re: st: MIXLOGIT: marginal effects
  • From: Richard Williams <[email protected]>
• Re: st: Interaction model
  • From: Shikha Sinha <[email protected]>
• Re: st: RE: a question on how to create a complex loop
  • From: Lim Lee <[email protected]>
• Re: st: how can I merge two data sets over a range of values
  • From: Lim Lee <[email protected]>
• Re: st: Drop subjects from a panel
  • From: Ayman Farahat <[email protected]>
• Re: st: Interaction model
  • From: David Hoaglin <[email protected]>
• Re: st: repost mixed effects fractional polynomial
  • From: Anders Alexandersson <[email protected]>
• Re: st: Drop subjects from a panel
  • From: Klaus Pforr <[email protected]>
• Re: st: repost mixed effects fractional polynomial
  • From: Anders Alexandersson <[email protected]>
• Re: st: Drop subjects from a panel
  • From: Phil Clayton <[email protected]>
• st: Interaction model
  • From: Shikha Sinha <[email protected]>
• st: how can I merge two data sets over a range of values
  • From: Richard Warr <[email protected]>
• RE: st: Tukey's HSD test from summary statistics
  • From: Maria Niarchou <[email protected]>
• Re: st: Drop subjects from a panel
  • From: Ayman Farahat <[email protected]>
• Fwd: st: Drop subjects from a panel
  • From: Abhimanyu Arora <[email protected]>
• Re: st: RE: re: St : matching estimator
  • From: Shikha Sinha <[email protected]>
• Re: st: Drop subjects from a panel
  • From: Klaus Pforr <[email protected]>
• Re: st: nbreg with fixed effect vs xtnbreg,fe
  • From: Shikha Sinha <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: [email protected] (Brendan Halpin)
• st: Drop subjects from a panel
  • From: Ayman Farahat <[email protected]>
• re: Re: st: MIXLOGIT: marginal effects
  • From: Christopher Baum <[email protected]>
• st: Selection correction with panel data. Standard errors
  • From: Fernando Rios Avila <[email protected]>
• Re: st: Tukey's HSD test from summary statistics
  • From: [email protected] (Jeff Pitblado, StataCorp LP)
• Re: st: nbreg with fixed effect vs xtnbreg,fe
  • From: "Brian P. Poi" <[email protected]>
• st: AW: time varying covariate Cox regression
  • From: Reinhardt Jan Dietrich <[email protected]>
• st: Graph: color in the document but prints dashed lines (scheme stata journal)
  • From: Marianne Bruins <[email protected]>
• [no subject]
  • From: Unknown
• st: time varying covariate Cox regression
  • From: Tim Evans <[email protected]>
• st: RE: catzero
  • From: Nick Cox <[email protected]>
• st: RE: a question on how to create a complex loop
  • From: Reinhardt Jan Dietrich <[email protected]>
• st: a question on how to create a complex loop
  • From: Aluko Hope <[email protected]>
• Re: st: R-Squre for Fixed Effects
  • From: Nick Cox <[email protected]>
• st: R-Squre for Fixed Effects
  • From: Ozgur Ozdemir <[email protected]>
• Re: st: org-mode
  • From: [email protected] (Brendan Halpin)
• st: Tukey's HSD test from summary statistics
  • From: Maria Niarchou <[email protected]>
• Re: st: RE: a question on averaging in Stata
  • From: Nick Cox <[email protected]>
• st: 2-day Dynamic Factor Models/Time Series course with Stata - 2-3 April 2012
  • From: Aiste Luksyte <[email protected]>
• st: Discrete-time duration models with sample selection
  • From: "Pattaro S." <[email protected]>
• Re: st: RE: a question on averaging in Stata
  • From: "[email protected]" <[email protected]>
• Re: st: RE: Scroll back the console without pausing calculations
  • From: Richard Herron <[email protected]>
• st: testing first-order autocorrelation correction
  • From: Edward James <[email protected]>
• st: RE: Scroll back the console without pausing calculations
  • From: "Cohen, Elan" <[email protected]>
• st: org-mode
  • From: "Airey, David C" <[email protected]>
• st: Re: Reshape and foreach for multiple failure analysis
  • From: [email protected]
• Re: st: autotabgraph
  • From: Nick Cox <[email protected]>
• Re: st: eta2
  • From: Nick Cox <[email protected]>
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: "Joseph Coveney" <[email protected]>
• st: eta2
  • From: "Carla Horlacher" <[email protected]>
• st: autotabgraph
  • From: Richard Fox <[email protected]>
• Re: st: Interpreting 3 way dummy interaction with margins
  • From: Maarten Buis <[email protected]>
• Re: st: Consistent estimation of the Double Hurdle model
  • From: Nick Cox <[email protected]>
• st: Consistent estimation of the Double Hurdle model
  • From: verdes <[email protected]>
• st: Scroll back the console without pausing calculations
  • From: Richard Herron <[email protected]>
• Re: st: Mata: editing values in a matrix when a condition is met
  • From: Nick Cox <[email protected]>
• Re: st: Binary panel data questions
  • From: Maarten Buis <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Clive Nicholas <[email protected]>
• Re: st: nbreg with fixed effect vs xtnbreg,fe
  • From: Richard Williams <[email protected]>
• Re: st: Re: Reshape and foreach for multiple failure analysis
  • From: Phil Clayton <[email protected]>
• Re: st: Re: Reshape and foreach for multiple failure analysis
  • From: Phil Clayton <[email protected]>
• Re: st: nbreg with fixed effect vs xtnbreg,fe
  • From: Muhammad Anees <[email protected]>
• Re: st: nbreg with fixed effect vs xtnbreg,fe
  • From: Richard Williams <[email protected]>
• st: Re: Reshape and foreach for multiple failure analysis
  • From: [email protected]
• re:st: Mata: editing values in a matrix when a condition is met
  • From: Christopher Baum <[email protected]>
• Re: st: RE: panel data
  • From: Joerg Luedicke <[email protected]>
• Re: st: RE: panel data
  • From: Richard Williams <[email protected]>
• st: Error message using Tabout and regressions by year command
  • From: Alice Jones <[email protected]>
• Re: st: RE: panel data
  • From: Deepti Garg <[email protected]>
• st: Mata: editing values in a matrix when a condition is met
  • From: Pablo Mitnik <[email protected]>
• Re: st: RE: panel data
  • From: Joerg Luedicke <[email protected]>
• Re: st: nbreg with fixed effect vs xtnbreg,fe
  • From: Richard Williams <[email protected]>
• Re: st: RE: panel data
  • From: Deepti Garg <[email protected]>
• Re: st: nbreg with fixed effect vs xtnbreg,fe
  • From: Shikha Sinha <[email protected]>
• st: Binary panel data questions
  • From: Kim Peeters <[email protected]>
• st: Re: non-convergence
  • From: [email protected] (Brendan Halpin)
• st: non-convergence
  • From: [email protected] (Brendan Halpin)
• st: catzero
  • From: Margaret MacDougall <[email protected]>
• Re: Re: st: pooled regression vs fixed effects
  • From: Sami Alameen <[email protected]>
• re:Re: st: pooled regression vs fixed effects
  • From: Christopher Baum <[email protected]>
• Re: st: Interpreting 3 way dummy interaction with margins
  • From: Colleen Nugent <[email protected]>
• Re: st: pooled regression vs fixed effects
  • From: Richard Williams <[email protected]>
• Re: st: pooled regression vs fixed effects
  • From: Sami Alameen <[email protected]>
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: [email protected]
• Re: st: nbreg with fixed effect vs xtnbreg,fe
  • From: Richard Williams <[email protected]>
• st: New versions of nearstat and splagvar available from SSC
  • From: "P. Wilner Jeanty" <[email protected]>
• st: RE: Main sources for Stata packages
  • From: "Lachenbruch, Peter" <[email protected]>
• Re: st: Main sources for Stata packages
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Re: st: nbreg with fixed effect vs xtnbreg,fe
  • From: Muhammad Anees <[email protected]>
• Re: st: nbreg with fixed effect vs xtnbreg,fe
  • From: Richard Williams <[email protected]>
• st: Re: Midas univariable regression
  • From: NELE BRUSSELAERS <[email protected]>
• RE: st: Interpreting 3 way dummy interaction with margins
  • From: Lauren Beresford <[email protected]>
• Re: st: nbreg with fixed effect vs xtnbreg,fe
  • From: Richard Williams <[email protected]>
• st: RE: RE: RE: RE: RE: RE: Accessing to a subvector of vector like
  • From: Nick Cox <[email protected]>
• st: RE: RE: RE: RE: RE: Accessing to a subvector of vector like
  • From: "Nakelse, Tebila (AfricaRice)" <[email protected]>
• Re: st: Interpreting 3 way dummy interaction with margins
  • From: "Airey, David C" <[email protected]>
• st: Stata London meeting September 13-14 2012: call for papers
  • From: Nick Cox <[email protected]>
• Re: st: Interpreting 3 way dummy interaction with margins
  • From: Maarten Buis <[email protected]>
• RE: st: pooled regression vs fixed effects
  • From: Ozgur Ozdemir <[email protected]>
• re:st: pooled regression vs fixed effects
  • From: Christopher Baum <[email protected]>
• Re: RE: st: SimpleSlopes in Multilevel Models
  • From: "Kerstin Alfes" <[email protected]>
• st: pooled regression vs fixed effects
  • From: Ozgur Ozdemir <[email protected]>
• Re: st: nbreg with fixed effect vs xtnbreg,fe
  • From: Muhammad Anees <[email protected]>
• RE: st: nbreg with fixed effect vs xtnbreg,fe
  • From: Nick Cox <[email protected]>
• Re: st: Interpreting 3 way dummy interaction with margins
  • From: Colleen Nugent <[email protected]>
• st: Re: Tobit with gllamm
  • From: janreinhardt <[email protected]>
• RE: st: nbreg with fixed effect vs xtnbreg,fe
  • From: Nick Cox <[email protected]>
• st: RE: Use of data originating from SPSS - update
  • From: Nick Cox <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Maarten Buis <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Maarten Buis <[email protected]>
• st: Most models have absurd implications (was: Re: st: MIXLOGIT: marginal effects)
  • From: <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Nick Cox <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Clive Nicholas <[email protected]>
• Re: st: Main sources for Stata packages
  • From: Phil Clayton <[email protected]>
• st: Main sources for Stata packages
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• Re: st: nbreg with fixed effect vs xtnbreg,fe
  • From: Muhammad Anees <[email protected]>
• Re: st: nbreg with fixed effect vs xtnbreg,fe
  • From: Shikha Sinha <[email protected]>
• Re: st: nbreg with fixed effect vs xtnbreg,fe
  • From: Muhammad Anees <[email protected]>
• st: Class definition changed between Stata 11 and 12
  • From: Sergiy Radyakin <[email protected]>
• Re: st: change keyboard mapping in Stata 12 for Mac
  • From: Donald Spady <[email protected]>
• Re: st: how to rename a set of variables using foreach
  • From: Ekaterina Hertog <[email protected]>
• st: Use of data originating from SPSS - update
  • From: Margaret MacDougall <[email protected]>
• Re: st: RE: import value labels
  • From: Nikolaos Pandis <[email protected]>
• RE: st: RE: import value labels
  • From: Nick Cox <[email protected]>
• st: nbreg with fixed effect vs xtnbreg,fe
  • From: Shikha Sinha <[email protected]>
• Re: st: RE: import value labels
  • From: Nikolaos Pandis <[email protected]>
• Re: st: interaction effects vs. interaction coefficients using contrast?
  • From: Colleen Nugent <[email protected]>
• st: RE: import value labels
  • From: Nick Cox <[email protected]>
• Re: st: geocode command and google query limit
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: import value labels
  • From: Nikolaos Pandis <[email protected]>
• Re: st: Re: Nearstat version
  • From: "P. Wilner Jeanty" <[email protected]>
• st: RE: RE: RE: RE: Accessing to a subvector of vector like
  • From: Nick Cox <[email protected]>
• RE: st: creating a text file with a specific format
  • From: Nick Cox <[email protected]>
• st: Stata 12.1 and -spmap-
  • From: Maurizio Pisati <[email protected]>
• RE: st: geocode command and google query limit
  • From: Lance Erickson <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Richard Williams <[email protected]>
• Re: st: change keyboard mapping in Stata 12 for Mac
  • From: Phil Schumm <[email protected]>
• Re: st: creating a text file with a specific format
  • From: Michael Eisenberg <[email protected]>
• st: RE: RE: RE: Accessing to a subvector of vector like
  • From: "Nakelse, Tebila (AfricaRice)" <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Arne Risa Hole <[email protected]>
• Re: st: RE: dropping integers from id variable
  • From: marcos stata <[email protected]>
• Re: st: change keyboard mapping in Stata 12 for Mac
  • From: Phil Schumm <[email protected]>
• Re: st: Anonymous nonnies
  • From: Marcello Pagano <[email protected]>
• Re: st: Re: Nearstat version
  • From: Nick Cox <[email protected]>
• Re: st: Anonymous nonnies
  • From: Richard Williams <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Maarten Buis <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Arne Risa Hole <[email protected]>
• Re: st: Interpreting 3 way dummy interaction with margins
  • From: Maarten Buis <[email protected]>
• st: RE: RE: recovering -table- output for programmatic use
  • From: Charles Vellutini <[email protected]>
• st: Interpreting 3 way dummy interaction with margins
  • From: Lauren Beresford <[email protected]>
• st: RE: RE: Accessing to a subvector of vector like
  • From: "Nakelse, Tebila (AfricaRice)" <[email protected]>
• Re: st: Re: Nearstat version
  • From: [email protected] (Brendan Halpin)
• Re: st: MIXLOGIT: marginal effects
  • From: Arne Risa Hole <[email protected]>
• Re: st: interaction effects vs. interaction coefficients using contrast?
  • From: Maarten Buis <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Maarten Buis <[email protected]>
• Re: st: change keyboard mapping in Stata 12 for Mac
  • From: Fred Wolfe <[email protected]>
• st: Anonymous nonnies
  • From: Marcello Pagano <[email protected]>
• Re: st: Factor variable notation vs. hand made dummy vars
  • From: Ulrich Kohler <[email protected]>
• RE: st: creating a text file with a specific format
  • From: Nick Cox <[email protected]>
• st: Re: Nearstat version
  • From: "P. Wilner Jeanty" <[email protected]>
• Re: st: creating a text file with a specific format
  • From: Michael Eisenberg <[email protected]>
• Re: st: Factor variable notation vs. hand made dummy vars
  • From: [email protected] (Jeff Pitblado, StataCorp LP)
• Re: st: change keyboard mapping in Stata 12 for Mac
  • From: Donald Spady <[email protected]>
• Re: st: Factor variable notation vs. hand made dummy vars
  • From: Richard Williams <[email protected]>
• st: RE: Accessing to a subvector of vector like
  • From: Nick Cox <[email protected]>
• st: RE: Factor variable notation vs. hand made dummy vars
  • From: "Lachenbruch, Peter" <[email protected]>
• st: Accessing to a subvector of vector like
  • From: "Nakelse, Tebila (AfricaRice)" <[email protected]>
• Re: st: Factor variable notation vs. hand made dummy vars
  • From: Richard Williams <[email protected]>
• RE: st: Concatenating two numerical variables with labels
  • From: Tim Evans <[email protected]>
• Re: st: Factor variable notation vs. hand made dummy vars
  • From: Richard Williams <[email protected]>
• Re: st: Factor variable notation vs. hand made dummy vars
  • From: [email protected] (Brendan Halpin)
• Re: st: RE: Goodness of fit of ordered logit model
  • From: Urmi Bhattacharya <[email protected]>
• Re: st: change keyboard mapping in Stata 12 for Mac
  • From: Phil Schumm <[email protected]>
• st: RE: recovering -table- output for programmatic use
  • From: Nick Cox <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Richard Williams <[email protected]>
• Re: st: interaction effects vs. interaction coefficients using contrast?
  • From: Colleen Nugent <[email protected]>
• st: Factor variable notation vs. hand made dummy vars
  • From: Ulrich Kohler <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Richard Williams <[email protected]>
• Re: st: Solution for Autocorrelation in Lag orders for VAR
  • From: Muhammad Anees <[email protected]>
• st: RE: dropping integers from id variable
  • From: "Ben Hoen" <[email protected]>
• [no subject]
  • From: Unknown
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: "Joseph Coveney" <[email protected]>
• R: st: MIXLOGIT: marginal effects
  • From: "Davide Castellani" <[email protected]>
• st: How to standardize (and save) a variable with SVY
  • From: Federico Biagi <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Arne Risa Hole <[email protected]>
• RE: RE: st: repeated measures ANOVA to MANOVA - revisit
  • From: "Feiveson, Alan H. (JSC-SK311)" <[email protected]>
• st: dropping integers from id variable
  • From: marcos stata <[email protected]>
• Re: st: RE: Re: ivreg2 program code
  • From: Maarten Buis <[email protected]>
• st: recovering -table- output for programmatic use
  • From: Charles Vellutini <[email protected]>
• st: margins after two steps method
  • From: "Nakelse, Tebila (AfricaRice)" <[email protected]>
• RE: st: Solution for Autocorrelation in Lag orders for VAR
  • From: Muhammad Akram <[email protected]>
• re:st: geocode command and google query limit
  • From: Erik Lindsley <[email protected]>
• st: gllamm or sureg for panel data multiple-equations model
  • From: "Dithmer, Jan" <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Maarten Buis <[email protected]>
• st: Fwd: ivreg2 program define code
  • From: Christopher Baum <[email protected]>
• RE: st: RE: Re: ivreg2 program code
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: Concatenating two numerical variables with labels
  • From: Nick Cox <[email protected]>
• Re: st: RE: Re: ivreg2 program code
  • From: "Michael Ndlovu" <[email protected]>
• Re: st: Concatenating two numerical variables with labels
  • From: Nick Cox <[email protected]>
• Re: st: Concatenating two numerical variables with labels
  • From: Maarten Buis <[email protected]>
• Re: st: MIXLOGIT: marginal effects
  • From: Arne Risa Hole <[email protected]>
• Re: st: RE: Re: ivreg2 program code
  • From: Maarten Buis <[email protected]>
• Re: st: Re: ivreg2 program code
  • From: Nick Cox <[email protected]>
• st: Concatenating two numerical variables with labels
  • From: Tim Evans <[email protected]>
• st: MIXLOGIT: marginal effects
  • From: "Davide Castellani" <[email protected]>
• st: RE: Re: ivreg2 program code
  • From: "Schaffer, Mark E" <[email protected]>
• RE: st: Reshape help
  • From: Tim Evans <[email protected]>
• st: Re: ivreg2 program code
  • From: "Michael Ndlovu" <[email protected]>
• RE: st: ivreg2 program code (was: RE: st: ivreg program code)
  • From: "Schaffer, Mark E" <[email protected]>
• Re: st: ivreg program code
  • From: Nick Cox <[email protected]>
• st: ivreg program code
  • From: "Michael Ndlovu" <[email protected]>
• Re: st: Rehape help
  • From: Nick Cox <[email protected]>
• Re: st: Rehape help
  • From: Phil Clayton <[email protected]>
• st: Rehape help
  • From: Tim Evans <[email protected]>
• Re: st: re: matrix question
  • From: [email protected] (Brendan Halpin)
• Re: st: re: Matrix question
  • From: [email protected] (Brendan Halpin)
• Re: st: re: matrix question
  • From: [email protected] (Brendan Halpin)
• Re: st: Solution for Autocorrelation in Lag orders for VAR
  • From: Muhammad Anees <[email protected]>
• Re: st: combining surveys
  • From: Phil Clayton <[email protected]>
• Re: st: Non integer weights - problem
  • From: Stas Kolenikov <[email protected]>
• Re: st: combining surveys
  • From: Stas Kolenikov <[email protected]>
• st: re: matrix question
  • From: Christopher Baum <[email protected]>
• st: combining surveys
  • From: new user <[email protected]>
• st: re: Matrix question
  • From: Christopher Baum <[email protected]>
• Re: st: Non integer weights - problem
  • From: Nick Cox <[email protected]>
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: Klaus Pforr <[email protected]>
• st: change keyboard mapping in Stata 12 for Mac
  • From: Donald Spady <[email protected]>
• st: Non integer weights - problem
  • From: "Raquel Guimaraes" <[email protected]>
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: Richard Williams <[email protected]>
• st: Matrix question
  • From: [email protected] (Brendan Halpin)
• RE: st: SimpleSlopes in Multilevel Models
  • From: Cameron McIntosh <[email protected]>
• Re: st: SimpleSlopes in Multilevel Models
  • From: Stas Kolenikov <[email protected]>
• Re: st: graphing predicted counts after zinb
  • From: Jennifer Owens <[email protected]>
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: [email protected]
• Re: st: SimpleSlopes in Multilevel Models
  • From: "Kerstin Alfes" <[email protected]>
• RE: st: Solution for Autocorrelation in Lag orders for VAR
  • From: Muhammad Akram <[email protected]>
• st: prtab/prvalue: compare predicted probabilities across values of X
  • From: "Yam, Eileen A." <[email protected]>
• Re: st: graphing predicted counts after zinb
  • From: Maarten Buis <[email protected]>
• Re: st: Hazard model with multiple entry AND time varying controls?
  • From: Steve Samuels <[email protected]>
• re:RE: st: Solution for Autocorrelation in Lag orders for VAR
  • From: Christopher Baum <[email protected]>
• st: graphing predicted counts after zinb
  • From: Jennifer Owens <[email protected]>
• RE: st: Solution for Autocorrelation in Lag orders for VAR
  • From: Muhammad Akram <[email protected]>
• Re: st: Solution for Autocorrelation in Lag orders for VAR
  • From: Muhammad Anees <[email protected]>
• Re: st: SimpleSlopes in Multilevel Models
  • From: Stas Kolenikov <[email protected]>
• st: Solution for Autocorrelation in Lag orders for VAR
  • From: Muhammad Akram <[email protected]>
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: Klaus Pforr <[email protected]>
• RE: st: SimpleSlopes in Multilevel Models
  • From: Cameron McIntosh <[email protected]>
• Re: st: -weight- spss: weight by -- telling stata the weight
  • From: Steve Samuels <[email protected]>
• Re: st: how to rename a set of variables using foreach
  • From: Nick Cox <[email protected]>
• st: geocode command and google query limit
  • From: Rüdiger Vollmeier <[email protected]>
• Re: st: how to rename a set of variables using foreach
  • From: Phil Clayton <[email protected]>
• Re: st: Merging datasets using non-identical addresses/strings as identifiers
  • From: Nick Cox <[email protected]>
• st: how to rename a set of variables using foreach
  • From: Ekaterina Hertog <[email protected]>
• st: Merging datasets using non-identical addresses/strings as identifiers
  • From: Benjamin Niug <[email protected]>
• Re: st: interaction effects vs. interaction coefficients using contrast?
  • From: Maarten Buis <[email protected]>
• Re: st: re: nearstat version
  • From: Rüdiger Vollmeier <[email protected]>
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: "Joseph Coveney" <[email protected]>
• Re: st: SimpleSlopes in Multilevel Models
  • From: Stas Kolenikov <[email protected]>
• Re: st: SimpleSlopes in Multilevel Models
  • From: "Kerstin Alfes" <[email protected]>
• RE: st: SimpleSlopes in Multilevel Models
  • From: Cameron McIntosh <[email protected]>
• Re: st: SimpleSlopes in Multilevel Models
  • From: Stas Kolenikov <[email protected]>
• st: testing for omitted variable bias and heteroskedasticity after - svy: regress -
  • From: <[email protected]>
• RE: st: repeated measures ANOVA to MANOVA - revisit [on behalf of Rob Ploutz-Snyder]
  • From: "Airey, David C" <[email protected]>
• Re: st: SimpleSlopes in Multilevel Models
  • From: "Kerstin Alfes" <[email protected]>
• Re: st: SimpleSlopes in Multilevel Models
  • From: Stas Kolenikov <[email protected]>
• st: SimpleSlopes in Multilevel Models
  • From: "Kerstin Alfes" <[email protected]>
• st: interaction effects vs. interaction coefficients using contrast?
  • From: Colleen Nugent <[email protected]>
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: [email protected]
• RE: st: Tukey's HSD with summary statistics
  • From: Maria Niarchou <[email protected]>
• Re: st: Tukey's HSD with summary statistics
  • From: Muhammad Anees <[email protected]>
• st: Tukey's HSD with summary statistics
  • From: Maria Niarchou <[email protected]>
• R: st: repeated measures ANOVA to MANOVA - revisit
  • From: <[email protected]>
• RE: st: RE: Goodness of fit of ordered logit model
  • From: Cameron McIntosh <[email protected]>
• Re: st: repeated measures ANOVA to MANOVA - revisit, khi
  • From: Philip Ender <[email protected]>
• RE: st: repeated measures ANOVA to MANOVA - revisit
  • From: "Lachenbruch, Peter" <[email protected]>
• Re: RE: st: repeated measures ANOVA to MANOVA - revisit
  • From: [email protected]
• Re: st: RE: Use of data originating from SPSS
  • From: Margaret MacDougall <[email protected]>
• Re: st: repeated measures ANOVA to MANOVA - revisit
  • From: [email protected]
• RE: st: repeated measures ANOVA to MANOVA - revisit
  • From: Ricardo Ovaldia <[email protected]>
• [no subject]
  • From: Unknown
• re:st: arima vs. regress
  • From: Christopher Baum <[email protected]>
• st: Interpreting 3-way binary interactions in svy:logit regression with margins command
  • From: Lauren Beresford <[email protected]>
• st: arima vs. regress
  • From: "Ferry, Danielle" <[email protected]>
• RE: st: repeated measures ANOVA to MANOVA - revisit [on behalf of Rob Ploutz-Snyder]
  • From: Ricardo Ovaldia <[email protected]>
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: Klaus Pforr <[email protected]>
• Re: st: re: nearstat version
  • From: Richard Williams <[email protected]>
• st: tolerance in spmat contiguity
  • From: Ajita Atreya <[email protected]>
• st: RE: st: Re: st: Re: st: RE: Calculatin​g the shortest dist ances between observatio​ns (based on longitude and latitu de)
  • From: Nick Cox <[email protected]>
• RE: st: How to drop low frequency patterns from panel data
  • From: Nick Cox <[email protected]>
• Re: st: Re: st: Re: st: RE: Calculatinâ??g the shortest dist ances between observatioâ??ns (based on longitude and latitu de)
  • From: Richard Williams <[email protected]>
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: Clyde B Schechter <[email protected]>
• Re: st: MI reshape
  • From: [email protected] (Yulia Marchenko, StataCorp)
• Re: st: How to drop low frequency patterns from panel data
  • From: Kim Peeters <[email protected]>
• RE: st: repeated measures ANOVA to MANOVA - revisit [on behalf of Rob Ploutz-Snyder]
  • From: "Feiveson, Alan H. (JSC-SK311)" <[email protected]>
• Re: st: RE: carrying observations forward if criteria met
  • From: David Kantor <[email protected]>
• st: update betafit available
  • From: Maarten Buis <[email protected]>
• Re: st: exog variable in VAR
  • From: Muhammad Anees <[email protected]>
• [no subject]
  • From: Unknown
• [no subject]
  • From: Unknown
• Re: st: repeated measures ANOVA to MANOVA - revisit
  • From: Ricardo Ovaldia <[email protected]>
• Re: st: How to drop low frequency patterns from panel data
  • From: Nick Cox <[email protected]>
• Re: st: How to drop low frequency patterns from panel data
  • From: Kim Peeters <[email protected]>
• st: exog variable in VAR
  • From: Muhammad Akram <[email protected]>
• st: RE: Goodness of fit of ordered logit model
  • From: Eleimon Gonis <[email protected]>
• Re: st: Goodness of fit of ordered logit model
  • From: Nick Cox <[email protected]>
• Re: st: Exploratory factor analysis using a mix of categorical and continuous variables
  • From: Urmi Bhattacharya <[email protected]>
• st: Goodness of fit of ordered logit model
  • From: Urmi Bhattacharya <[email protected]>
• st: New version of -scheme_rbn1mono- on SSC
  • From: "Roger B. Newson" <[email protected]>
• Re: st: re: nearstat version
  • From: Nick Cox <[email protected]>
• Re: st: re: nearstat version
  • From: Nick Cox <[email protected]>
• st: re: nearstat version
  • From: Christopher Baum <[email protected]>
• st: Re: st: Re: st: Re: st: Re: st: RE: Calculatin​g the shortest distances between observatio​ns (based on longitude and latitude)
  • From: Nick Cox <[email protected]>
• st: New version of -scsomersd- for SSC
  • From: "Roger B. Newson" <[email protected]>
• Re: st: How to drop low frequency patterns from panel data
  • From: Nick Cox <[email protected]>
• st: New version of -dsweight- on SSC
  • From: "Roger B. Newson" <[email protected]>
• st: re: nearstat version
  • From: Christopher Baum <[email protected]>
• st: Re: st: Re: st: Re: st: RE: Calculatin​g the shortest distances between observatio​ns (based on longitude and latitude)
  • From: Rüdiger Vollmeier <[email protected]>
• st: Update to -stjm- on SSC
  • From: "Crowther, Michael J." <[email protected]>
• Re: st: How to drop low frequency patterns from panel data
  • From: Kim Peeters <[email protected]>
• Re: st: st: generating lag variable in a Panel Dataset
  • From: Nick Cox <[email protected]>
• st: Re: st: Re: st: RE: Calculatin​g the shortest distances between observatio​ns (based on longitude and latitude)
  • From: Nick Cox <[email protected]>
• st: Re: st: RE: Calculatin​g the shortest distances between observatio​ns (based on longitude and latitude)
  • From: Rüdiger Vollmeier <[email protected]>
• Re: st: Uppercase arguments for programs
  • From: Nick Cox <[email protected]>
• Re: st: Exploratory factor analysis using a mix of categorical and continuous variables
  • From: Nick Cox <[email protected]>
• st: R: qnorm and ttest question
  • From: <[email protected]>
• Re: st: How to drop low frequency patterns from panel data
  • From: Nick Cox <[email protected]>
• st: Exploratory factor analysis using a mix of categorical and continuous variables
  • From: Urmi Bhattacharya <[email protected]>
• Re: AW: st: RE: Use of data originating from SPSS
  • From: Nick Cox <[email protected]>
• st: How to drop low frequency patterns from panel data
  • From: Kim Peeters <[email protected]>
• Re: AW: st: RE: Use of data originating from SPSS
  • From: Margaret MacDougall <[email protected]>
• AW: st: RE: Use of data originating from SPSS
  • From: "Kaulisch, Marc" <[email protected]>
• Re: st: Uppercase arguments for programs
  • From: Nick Cox <[email protected]>
• Re: st: set logtype text, permanent doesn't stay permanent
  • From: "Airey, David C" <[email protected]>
• st: Uppercase arguments for programs
  • From: Bert Lloyd <[email protected]>
• Re: st: RE: One v. two-step ECMs
  • From: Neesha Harnam <[email protected]>
• Re: st: qnorm and ttest question
  • From: David Hoaglin <[email protected]>
• st: st: generating lag variable in a Panel Dataset
  • From: "Clifton Chow" <[email protected]>
• st: xtmixed backed up because of big sample size?
  • From: Michael Ochsner <[email protected]>
• RE: st: RE: Use of data originating from SPSS
  • From: Nick Cox <[email protected]>
• Re: st: RE: Use of data originating from SPSS
  • From: Margaret MacDougall <[email protected]>
• RE: st: RE: Use of data originating from SPSS
  • From: Nick Cox <[email protected]>
• Re: st: RE: Use of data originating from SPSS
  • From: Margaret MacDougall <[email protected]>
• Re: st: RE: Use of data originating from SPSS
  • From: Margaret MacDougall <[email protected]>
• st: RE: carrying observations forward if criteria met
  • From: Nick Cox <[email protected]>
• Re: st: Estout
  • From: Joerg Luedicke <[email protected]>
• st: MI reshape
  • From: Laura Gibbons <[email protected]>
• Re: st: RE: strings
  • From: KOTa <[email protected]>
• st: carrying observations forward if criteria met
  • From: laura hendrix <[email protected]>
• st: Re: st: RE: Calculatin​g the shortest distances between observatio​ns (based on longitude and latitude)
  • From: "Dimitriy V. Masterov" <[email protected]>
• st: Estout
  • From: Sarah Phillips <[email protected]>
• st: RE: Calculatin​g the shortest distances between observatio​ns (based on longitude and latitude)
  • From: "P. Wilner Jeanty" <[email protected]>
• st: problem with looping and saving macros
  • From: Lim Lee <[email protected]>
• st: qnorm and ttest question
  • From: Stata <[email protected]>
• Re: st: -weight- spss: weight by -- telling stata the weight
  • From: Stas Kolenikov <[email protected]>
• Re: st: Hazard model with multiple entry AND time varying controls?
  • From: Nick Eubank <[email protected]>
• st: -weight- spss: weight by -- telling stata the weight
  • From: David Cefskimal <[email protected]>
• Re: st: Fixed lag smoothing in state space model
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• st: RE: How do the Wald test chi-square statistic and the pseudo r-square relate to each other in clogit?
  • From: LUCIA SUMMERS <[email protected]>
• RE: st: saving estimated parameters with -parmby-
  • From: Schöler, Lisa <[email protected]>
• Re: st: FW: VAR lag selection and lags autocorrelation
  • From: Muhammad Anees <[email protected]>
• st: FW: VAR lag selection and lags autocorrelation
  • From: Muhammad Akram <[email protected]>
• st: New package -reffadjust- on SSC
  • From: Tom Palmer <[email protected]>
• Re: st: saving estimated parameters with -parmby-
  • From: "Roger B. Newson" <[email protected]>
• st: saving estimated parameters with -parmby-
  • From: Schöler, Lisa <[email protected]>
• Re: st: Calculating the shortest distances between observations (based on longitude and latitude)
  • From: Robert Picard <[email protected]>
• Re: st: Calculating the shortest distances between observations (based on longitude and latitude)
  • From: Nick Cox <[email protected]>
• st: Calculating the shortest distances between observations (based on longitude and latitude)
  • From: Rüdiger Vollmeier <[email protected]>
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: Richard Herron <[email protected]>
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: Amir Sariaslan <[email protected]>
• Re: st: RE: strings
  • From: Robert Picard <[email protected]>
• st: Pie charts - wrong colors when re-sized
  • From: "Allan Reese (Cefas)" <[email protected]>
• [no subject]
  • From: Unknown
• [no subject]
  • From: Unknown
• Re: st: repeated measures ANOVA to MANOVA - revisit
  • From: Ricardo Ovaldia <[email protected]>
• st: SSC Activity, January 2012
  • From: Christopher Baum <[email protected]>
• st: Bug with pie charts: example
  • From: "Allan Reese (Cefas)" <[email protected]>
• Re: st: Use of data originating from SPSS
  • From: Ronan Conroy <[email protected]>
• Re: st: Hazard model with multiple entry AND time varying controls?
  • From: Steve Samuels <[email protected]>
• Re: st: string date
  • From: Nick Cox <[email protected]>
• st: Re: SAS vs STATA : why is xtlogit SO slow ?
  • From: "Joseph Coveney" <[email protected]>
• st: RE: One v. two-step ECMs
  • From: DE SOUZA Eric <[email protected]>
• Re: st: One v. two-step ECMs
  • From: Muhammad Anees <[email protected]>
• st: One v. two-step ECMs
  • From: Neesha Harnam <[email protected]>
• Re: st: Coding assistance.
  • From: Nick Cox <[email protected]>
• Re: st: RE: strings
  • From: Nick Cox <[email protected]>
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: [email protected]
• Re: st: string date
  • From: Nick Cox <[email protected]>
• st: Coding assistance.
  • From: natasha agarwal <[email protected]>
• st: Margin with two step estimator.
  • From: "Nakelse, Tebila (AfricaRice)" <[email protected]>
• st: RE: Use of data originating from SPSS
  • From: "MacLennan, Graeme" <[email protected]>
• st: Fixed lag smoothing in state space model
  • From: Jorge Eduardo Pérez Pérez <[email protected]>
• st: Hazard model with multiple entry AND time varying controls?
  • From: Nick Eubank <[email protected]>
• Re: st: SAS vs STATA : why is xtlogit SO slow ?
  • From: Amir Sariaslan <[email protected]>
• Re: st: Identifying subfamilies (2nd+ marriages) within records of families
  • From: Anna Reimondos <[email protected]>
• Re: st: set logtype text, permanent doesn't stay permanent
  • From: Donald Spady <[email protected]>
• Re: st: Identifying subfamilies (2nd+ marriages) within records of families
  • From: Nick Cox <[email protected]>
• Re: st: string date
  • From: Nick Cox <[email protected]>
• Re: st: Program error after installing Stata 12.1 for the MAC.
  • From: [email protected] (James Hassell, StataCorp LP)
• Re: st: Identifying subfamilies (2nd+ marriages) within records of families
  • From: Anna Reimondos <[email protected]>
• st: string date
  • From: Rui Zeng <[email protected]>
• Re: st: Re: factor analysis and bootstrapping
  • From: Jurgen Sidgman <[email protected]>
• Re: st: Identifying subfamilies (2nd+ marriages) within records of families
  • From: Nick Cox <[email protected]>
• st: Identifying subfamilies (2nd+ marriages) within records of families
  • From: Anna Reimondos <[email protected]>
• Re: st: Re: factor analysis and bootstrapping
  • From: Nick Cox <[email protected]>
• Re: st: Program error after installing Stata 12.1 for the MAC.
  • From: Fred Wolfe <[email protected]>
• st: Re: factor analysis and bootstrapping
  • From: Jurgen Sidgman <[email protected]>
• Re: st: Program error after installing Stata 12.1 for the MAC.
  • From: Phil Schumm <[email protected]>
• Re: st: within estimator and effecomic effects
  • From: Christopher Baum <[email protected]>
• Re: Re: st: Program error after installing Stata 12.1 for the MAC.,
  • From: Philip Ender <[email protected]>
• Re: st: Problem with esttab matrix() and rtf files
  • From: Carsten Sauer <[email protected]>
• Re: st: Program error after installing Stata 12.1 for the MAC.
  • From: Fred Wolfe <[email protected]>
• Re: st: Program error after installing Stata 12.1 for the MAC.
  • From: Phil Schumm <[email protected]>
• Re: st: Program error after installing Stata 12.1 for the MAC.
  • From: Philip Ender <[email protected]>
• st: Program error after installing Stata 12.1 for the MAC.
  • From: Fred Wolfe <[email protected]>
• Re: st: protect my files in a public hard drive
  • From: Anders Alexandersson <[email protected]>
• RE: st: conditional frailty model
  • From: Arranz Muñoz José María <[email protected]>
• Re: st: protect my files in a public hard drive
  • From: Steve Nakoneshny <[email protected]>
• st: SAS vs STATA : why is xtlogit SO slow ?
  • From: [email protected]
• Re: st: Use of data originating from SPSS
  • From: Richard Williams <[email protected]>
• st: RE: Error message using Tabout and regressions by year command
  • From: Nick Cox <[email protected]>
• Re: st: conditional frailty model
  • From: Matthias Pierce <[email protected]>
• st: RE: Use of data originating from SPSS
  • From: Nick Cox <[email protected]>
• st: Use of data originating from SPSS
  • From: Margaret MacDougall <[email protected]>
• Re: Re: st: New program - snpgrab
  • From: Elwood Cook <[email protected]>
• RE: st: factor analysis and bootstrapping
  • From: "Grant, Robert" <[email protected]>
• st: Error message using Tabout and regressions by year command
  • From: Alice Jones <[email protected]>
• st: Question about Mata classes and Static keyword
  • From: Erik Lindsley <[email protected]>
• st: protect my files in a public hard drive
  • From: Andrés Castañeda <[email protected]>
• st: Problem with esttab matrix() and rtf files
  • From: Christophe Kolodziejczyk <[email protected]>
• Re: st: repeated measures ANOVA to MANOVA
  • From: Ricardo Ovaldia <[email protected]>
• re: st: Propensity Score Matching
  • From: "Ariel Linden, DrPH" <[email protected]>
• Re: st: subpop() and over() with survey mean estimation using SDR weights
  • From: Sam Schulhofer-Wohl <[email protected]>
• st: repeated measures ANOVA to MANOVA
  • From: Ricardo Ovaldia <[email protected]>
• st: spmat idistance error
  • From: [email protected]
• RE: st: factor analysis and bootstrapping
  • From: Cameron McIntosh <[email protected]>
• re: st: set logtype text, permanent doesn't stay permanent
  • From: "Airey, David C" <[email protected]>
• Re: st: Re: st: RE: endogeneous switching regression with movestay-ado: error after margins command
  • From: Stephani Jens <[email protected]>
• Re: st: set logtype text, permanent doesn't stay permanent
  • From: Amy Dunbar <[email protected]>
• RE: st: RE: strings
  • From: Nick Cox <[email protected]>
• st: RE: Test of Normality and Heteroskedasticity
  • From: Nick Cox <[email protected]>
• Re: st: RE: strings
  • From: KOTa <[email protected]>
• RE: st: RE: Panel data
  • From: Alexander James <[email protected]>
• RE: st: Testing the extent of difference between two coefficients in the same model
  • From: Nick Cox <[email protected]>
• Re: st: Testing the extent of difference between two coefficients in the same model
  • From: Maarten Buis <[email protected]>
• st: RE: strings
  • From: Nick Cox <[email protected]>
• Re: st: RE: Panel data
  • From: Klaus Pforr <[email protected]>
• st: -groups- updated on SSC
  • From: Nick Cox <[email protected]>
• st: strings
  • From: KOTa <[email protected]>
• RE: st: Testing the extent of difference between two coefficients in the same model
  • From: Erik Aadland <[email protected]>
• st: RE: Panel data
  • From: Nick Cox <[email protected]>
• Re: st: How to standardize a variable with a define mean
  • From: Alberto R Osella <[email protected]>
• RE: st: How to standardize a variable with a define mean
  • From: Nick Cox <[email protected]>
• Re: st: coding for weighting factor variable -weight-
  • From: David Cefskimal <[email protected]>
• Re: st: Listing var1 if var* equals X
  • From: Lars Folkestad <[email protected]>
• Re: st: How to standardize a variable with a define mean
  • From: Alberto R Osella <[email protected]>
• st: Panel data
  • From: Alexander James <[email protected]>
• Re: st: How to standardize a variable with a define mean
  • From: Maarten Buis <[email protected]>
• st: How to standardize a variable with a define mean
  • From: Alberto R Osella <[email protected]>
• Re: st: categorize variables basaed on percentitles
  • From: Nick Cox <[email protected]>
• Re: st: Testing the extent of difference between two coefficients in the same model
  • From: Maarten Buis <[email protected]>
• RE: st: Testing the extent of difference between two coefficients in the same model
  • From: Erik Aadland <[email protected]>