Notice: On April 23, 2014, Statalist moved from an email list to a forum, based at statalist.org.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

From |
"Heekyung \"Hellen\" Kim" <hekim@mit.edu> |

To |
<statalist@hsphsun2.harvard.edu> |

Subject |
RE: st: how to put both coefficient and exponentiated form in a table using estout or similar command |

Date |
Fri, 14 Oct 2011 07:30:42 -0400 |

Thank you! Sorry for keeping asking a question. How can I label N_clust and D1 for a table (to present in my word document)? I found how to label variables, but couldn't find how to label stat numbers. -----Original Message----- From: owner-statalist@hsphsun2.harvard.edu [mailto:owner-statalist@hsphsun2.harvard.edu] On Behalf Of Carsten Sauer Sent: Friday, October 14, 2011 4:06 AM To: statalist@hsphsun2.harvard.edu Subject: Re: st: how to put both coefficient and exponentiated form in a table using estout or similar command Try this example example: sysuse auto, clear su length, d gen class = 1 if length< r(mean) replace class = 0 if length> r(mean) xi:nbreg rep78 foreign i.class, vce(cluster class) su foreign if e(sample)==1& foreign ==1 estadd scalar D1 = r(N) esttab, s(N N_clust D1) Carsten Am 13.10.2011 23:43, schrieb Heekyung "Hellen" Kim: > I have a related question to -estout, again. > > I need to put the number of observations in each group of two groups in the > samples from the analysis (D=1 and D=0). Then I have about 900 classes. > The "stat" command calls for only the total number of observations. Is > there any way I can make estout add three rows of N's for one group, N for > the total number of observations, and then N for the number of classes? > > My regression looks like this: > > xi:nbreg y D i.class, vce(cluster class) > > So I want to make -estout write N for D=1, N for all, N for the number of > classes. > > Thank you for the answer in advance. > > > -----Original Message----- > From: owner-statalist@hsphsun2.harvard.edu > [mailto:owner-statalist@hsphsun2.harvard.edu] On Behalf Of Carsten Sauer > Sent: Sunday, October 09, 2011 1:33 PM > To: statalist@hsphsun2.harvard.edu > Subject: Re: st: how to put both coefficient and exponentiated form in a > table using estout or similar command > > Try the following example: > > sysuse auto > nbreg rep78 price mpg > estadd expb > estout, cells(b(star fmt(2)) se(par fmt(2)) expb (par([ ]))) > drop(lnalpha:) stats(N ll chi2, fmt(%8.0f %8.2f)) > > > > Am 09.10.2011 18:44, schrieb Heekyung "Hellen" Kim: >> Thank you so much for the reply. >> >> I can see that I can make a table with two columns using -esttab with >> eform(0 1). Is there a way for me to put the expontionated form under the >> raw coefficient in a bracket in the same column? >> >> -----Original Message----- >> From: owner-statalist@hsphsun2.harvard.edu >> [mailto:owner-statalist@hsphsun2.harvard.edu] On Behalf Of Richard Herron >> Sent: Saturday, October 08, 2011 5:06 PM >> To: statalist@hsphsun2.harvard.edu >> Subject: Re: st: how to put both coefficient and exponentiated form in a >> table using estout or similar command >> >> Have you tried storing the regression with -eststo- then using >> -esttab- with the -, eform- option? >> >> Here's a like to an example on the -estout- package page: >> http://repec.org/bocode/e/estout/advanced.html#advanced001 >> >> (The -estout- package is available from SSC: >> http://repec.org/bocode/e/estout/index.html) >> >> On Sat, Oct 8, 2011 at 16:39, Heekyung "Hellen" Kim<hekim@mit.edu> wrote: >>> Hi, I want to use -estout (or anything like that) to have a result table. >>> >>> I am using xtnbreg or nbreg. I want to put both coefficient and >>> exponentiated form in ONE table. >>> >>> I can do one of each using estout without eform for the first and estout >>> with eform option for expoentiated form. >>> >>> Is there any way to show both in one table ? >>> >>> estout, cells(b(star fmt(2)) se(par fmt(2))) drop(_I* o._I*) stats(N ll >>> chi2, fmt(%8.2f)) >>> estout, cells(b(star fmt(2)) se(par fmt(2))) drop(_I* o._I*) stats(N ll >>> chi2, fmt(%8.2f)) eform >>> >>> I used the above two line to have SEPARATE tables. I wish to have one >> table >>> containing both. >>> >>> -Helen >>> >>> * >>> * For searches and help try: >>> * http://www.stata.com/help.cgi?search >>> * http://www.stata.com/support/statalist/faq >>> * http://www.ats.ucla.edu/stat/stata/ >>> >> * >> * For searches and help try: >> * http://www.stata.com/help.cgi?search >> * http://www.stata.com/support/statalist/faq >> * http://www.ats.ucla.edu/stat/stata/ >> >> >> * >> * For searches and help try: >> * http://www.stata.com/help.cgi?search >> * http://www.stata.com/support/statalist/faq >> * http://www.ats.ucla.edu/stat/stata/ -- Carsten Sauer Soziale Ungleichheit und Sozialstrukturanalyse Universität Bielefeld Fakultät für Soziologie Postfach 10 01 31 33501 Bielefeld Tel.: 0521 106-67291/-6948 (Sekr. Frau Fischer) Fax: 0521 106-6479 * * For searches and help try: * http://www.stata.com/help.cgi?search * http://www.stata.com/support/statalist/faq * http://www.ats.ucla.edu/stat/stata/ * * For searches and help try: * http://www.stata.com/help.cgi?search * http://www.stata.com/support/statalist/faq * http://www.ats.ucla.edu/stat/stata/

**Follow-Ups**:**Re: st: how to put both coefficient and exponentiated form in a table using estout or similar command***From:*carsten sauer <carsten.sauer@uni-bielefeld.de>

**References**:**st: how to put both coefficient and exponentiated form in a table using estout or similar command***From:*"Heekyung \"Hellen\" Kim" <hekim@mit.edu>

**Re: st: how to put both coefficient and exponentiated form in a table using estout or similar command***From:*Richard Herron <richard.c.herron@gmail.com>

**RE: st: how to put both coefficient and exponentiated form in a table using estout or similar command***From:*"Heekyung \"Hellen\" Kim" <hekim@mit.edu>

**Re: st: how to put both coefficient and exponentiated form in a table using estout or similar command***From:*Carsten Sauer <carsten.sauer@uni-bielefeld.de>

**RE: st: how to put both coefficient and exponentiated form in a table using estout or similar command***From:*"Heekyung \"Hellen\" Kim" <hekim@mit.edu>

*From:*Carsten Sauer <carsten.sauer@uni-bielefeld.de>

- Prev by Date:
**Re: st: how to index regressions inside a foreach loop in order to avoid writing over the estimates** - Next by Date:
- Previous by thread:
- Next by thread:
- Index(es):