Notice: On March 31, it was **announced** that Statalist is moving from an email list to a **forum**. The old list will shut down at the end of May, and its replacement, **statalist.org** is already up and running.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

From |
"Roger B. Newson" <r.newson@imperial.ac.uk> |

To |
statalist@hsphsun2.harvard.edu |

Subject |
Re: st: How to plot ORs and CI - results of a logistic regression |

Date |
Mon, 02 Jul 2012 12:20:29 +0100 |

ytitle("", axis=2)

ylab(, valuelabel angle(0) axis(1)) What exactly do you mean by "print on top of the estimates"? Best wishes Roger Roger B Newson BSc MSc DPhil Lecturer in Medical Statistics Respiratory Epidemiology and Public Health Group National Heart and Lung Institute Imperial College London Royal Brompton Campus Room 33, Emmanuel Kaye Building 1B Manresa Road London SW3 6LR UNITED KINGDOM Tel: +44 (0)20 7352 8121 ext 3381 Fax: +44 (0)20 7351 8322 Email: r.newson@imperial.ac.uk Web page: http://www.imperial.ac.uk/nhli/r.newson/ Departmental Web page: http://www1.imperial.ac.uk/medicine/about/divisions/nhli/respiration/popgenetics/reph/ Opinions expressed are those of the author, not of the institution. On 02/07/2012 11:31, Sofia Ramiro wrote:

Thank you. It is moving on the right direction (attached), but now the labels of the variables on the left-hand side disappeared, whereas earlier I had it. Any idea why? On the right-hand side I do have the estimates and CI printed. Is it possible to get rid of the 2nd y-axis title "confint"? And is it possible to print on top of the estimates, something like "Odds Ratios (95% CI)"? Thank you very much for your help! Best wishes, Sofia ----------------------------------------Date: Mon, 2 Jul 2012 10:34:31 +0100 From: r.newson@imperial.ac.uk To: statalist@hsphsun2.harvard.edu Subject: Re: st: How to plot ORs and CI - results of a logistic regression Sorry, I should have specified a -ylabel()- option for your -rcap- plot. This should probably be: ylabel(, valuelabel angle(0) axis(2)) which should cause the values of -confint- to be printed with value labels, which should be confidence intervals. I hope this helps. Let me know if it doesn't. Best wishes Roger Roger B Newson BSc MSc DPhil Lecturer in Medical Statistics Respiratory Epidemiology and Public Health Group National Heart and Lung Institute Imperial College London Royal Brompton Campus Room 33, Emmanuel Kaye Building 1B Manresa Road London SW3 6LR UNITED KINGDOM Tel: +44 (0)20 7352 8121 ext 3381 Fax: +44 (0)20 7351 8322 Email: r.newson@imperial.ac.uk Web page: http://www.imperial.ac.uk/nhli/r.newson/ Departmental Web page: http://www1.imperial.ac.uk/medicine/about/divisions/nhli/respiration/popgenetics/reph/ Opinions expressed are those of the author, not of the institution. On 01/07/2012 21:31, Sofia Ramiro wrote:yes, you are totally right. Sorry about this. Now I manage to run it and to get a graph. however, I don't have the estimates and CI printed on the right-hand side. The only thing added in this graph was a 2nd y-axis on the right named "confint" and nothing else differed. I am not sure I will be able to send the graph attached, but I will try. Any hints? thanks! Best wishes, Sofia ----------------------------------------Date: Sun, 1 Jul 2012 20:53:48 +0100 From: r.newson@imperial.ac.uk To: statalist@hsphsun2.harvard.edu Subject: Re: st: How to plot ORs and CI - results of a logistic regression I suspect that you have an out-of-date version of -sdecode-. If your current version of Stata is Version 11 or higher, then you should update -sdecode- (and -bmjcip-) to the most recent version downloadable from SSC. I hope this helps. Let me know if it doesn't. Best wishes Roger Roger B Newson BSc MSc DPhil Lecturer in Medical Statistics Respiratory Epidemiology and Public Health Group National Heart and Lung Institute Imperial College London Royal Brompton Campus Room 33, Emmanuel Kaye Building 1B Manresa Road London SW3 6LR UNITED KINGDOM Tel: +44 (0)20 7352 8121 ext 3381 Fax: +44 (0)20 7351 8322 Email: r.newson@imperial.ac.uk Web page: http://www.imperial.ac.uk/nhli/r.newson/ Departmental Web page: http://www1.imperial.ac.uk/medicine/about/divisions/nhli/respiration/popgenetics/reph/ Opinions expressed are those of the author, not of the institution. On 01/07/2012 20:41, Sofia Ramiro wrote:Thank you very much for your hel, Roger. The first part worked very well and now I manage to include the variable labels, thanks! however, I got some problems with the 2nd part . bmjcip S_1 S_2 S_3, cformat(%8.2f) option ftrim not allowed I still tried using other cformats and even xmlsub, but none of them worked. Can you please help me? thanks! Sofia ----------------------------------------Date: Sun, 1 Jul 2012 20:12:14 +0100 From: r.newson@imperial.ac.uk To: statalist@hsphsun2.harvard.edu Subject: Re: st: How to plot ORs and CI - results of a logistic regression To reconstruct the variable labels into a variable with value labels, use the -label- option of -parmest-, together with the -sencode- package, which you can also download from SSC, and which is a "super" version of -encode-. As in: #delim ; logistic asdasimprov3M1 asdascalc male num_anos_escolaridade eva_total_colunaconvhighlow4; parmest, norestore eform label; sencode label, gene(parmlab); twoway scatter parmlab estimate, xline(1) ylab(, valuelabel angle(0)) || rcap min95 max95 parmlab, horizontal legend(order(1 "point estimate" 2 "95% conf. int.") pos(6)) xlabel(0(1)8) xtitle("Odds Ratio") ytitle(""); And, if you want to print the estimates and confidence limits on the right-hand side of the graph, then you can download the -sdecode- and -bmjcip- packages from SSC, and use those. (-sdecode- is a "super" version of -decode-, and -bmjcip- is a front end for -sdecode-.) As in: #delim ; logistic asdasimprov3M1 asdascalc male num_anos_escolaridade eva_total_colunaconvhighlow4; parmest, norestore eform label; sencode label, gene(parmlab); clonevar S_1=estimate; clonevar S_2=min95; clonevar S_3=max96; bmjcip S_1 S_2 S_3, cformat(%8.2f); gene confint=S_1+" "+S_2+" "+S_3; sencode confint, many replace; twoway scatter parmlab estimate, xline(1) ylab(, valuelabel angle(0)) yaxis(1) || rcap min95 max95 confint, horizontal yaxis(2) || , legend(order(1 "point estimate" 2 "95% conf. int.") pos(6)) xlabel(0(1)8) xtitle("Odds Ratio") ytitle(""); This should give the confidence intervals for the odds ratios on the right-hand axis to 2 decimal places. (Let me know if it doesn't.) Best wishes Roger Roger B Newson BSc MSc DPhil Lecturer in Medical Statistics Respiratory Epidemiology and Public Health Group National Heart and Lung Institute Imperial College London Royal Brompton Campus Room 33, Emmanuel Kaye Building 1B Manresa Road London SW3 6LR UNITED KINGDOM Tel: +44 (0)20 7352 8121 ext 3381 Fax: +44 (0)20 7351 8322 Email: r.newson@imperial.ac.uk Web page: http://www.imperial.ac.uk/nhli/r.newson/ Departmental Web page: http://www1.imperial.ac.uk/medicine/about/divisions/nhli/respiration/popgenetics/reph/ Opinions expressed are those of the author, not of the institution. On 01/07/2012 19:13, Sofia Ramiro wrote:Dear Statalist members, I am trying to plot the results of a logistic regression. I would like to have a graph with the ORs and 95%CI plotted. On the y-axis I would like to include the label of the variables names and, ideally (if possible), I would like to add, on the right hand side of the graph, the ORs and 95%CI written (just as we see for the forrest plots in a meta-analysis). Having reviewed what as been written on this topic on statalist, this is what I did: logistic asdasimprov3M1 asdascalc male num_anos_escolaridade eva_total_colunaconvhighlow4 parmest, norestore eform egen axis= axis(estimate), label(parm) twoway scatter axis estimate, /// xline(1) ylab(, valuelabel angle(0)) || /// rcap min95 max95 axis, horizontal /// legend(order(1 "point estimate" /// 2 "95% conf. int.") pos(6)) /// xlabel(0(1)8) xtitle("Odds Ratio") ytitle("") My problems are: - On the y-axis I get the variables' names, but they are abbreviated names for my own use - how do I manage to put there labels - eg instead of male, I would like to have "Male gender (vs. female)" ? - Is it to possible to create a column on the right hand side of the graph where the ORs and 95%CI are written (in addition to being ploted in the graph)? If yes, how? thanks! Sofia * * For searches and help try: * http://www.stata.com/help.cgi?search * http://www.stata.com/support/statalist/faq * http://www.ats.ucla.edu/stat/stata/* * For searches and help try: * http://www.stata.com/help.cgi?search * http://www.stata.com/support/statalist/faq * http://www.ats.ucla.edu/stat/stata/* * For searches and help try: * http://www.stata.com/help.cgi?search * http://www.stata.com/support/statalist/faq * http://www.ats.ucla.edu/stat/stata/* * For searches and help try: * http://www.stata.com/help.cgi?search * http://www.stata.com/support/statalist/faq * http://www.ats.ucla.edu/stat/stata/

**Follow-Ups**:**Re: st: How to plot ORs and CI - results of a logistic regression***From:*"Roger B. Newson" <r.newson@imperial.ac.uk>

**References**:**st: How to plot ORs and CI - results of a logistic regression***From:*Sofia Ramiro <sofiaramiro@hotmail.com>

**Re: st: How to plot ORs and CI - results of a logistic regression***From:*"Roger B. Newson" <r.newson@imperial.ac.uk>

**RE: st: How to plot ORs and CI - results of a logistic regression***From:*Sofia Ramiro <sofiaramiro@hotmail.com>

**Re: st: How to plot ORs and CI - results of a logistic regression***From:*"Roger B. Newson" <r.newson@imperial.ac.uk>

**RE: st: How to plot ORs and CI - results of a logistic regression***From:*Sofia Ramiro <sofiaramiro@hotmail.com>

**Re: st: How to plot ORs and CI - results of a logistic regression***From:*"Roger B. Newson" <r.newson@imperial.ac.uk>

**RE: st: How to plot ORs and CI - results of a logistic regression***From:*Sofia Ramiro <sofiaramiro@hotmail.com>

- Prev by Date:
**st: negative variance after gb2fit** - Next by Date:
**Re: st: How to plot ORs and CI - results of a logistic regression** - Previous by thread:
**RE: st: How to plot ORs and CI - results of a logistic regression** - Next by thread:
**Re: st: How to plot ORs and CI - results of a logistic regression** - Index(es):