Notice: On March 31, it was **announced** that Statalist is moving from an email list to a **forum**. The old list will shut down on April 23, and its replacement, **statalist.org** is already up and running.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

From |
Sergiy Radyakin <serjradyakin@gmail.com> |

To |
"statalist@hsphsun2.harvard.edu" <statalist@hsphsun2.harvard.edu> |

Subject |
Re: st: table formatting in stata |

Date |
Fri, 28 Jun 2013 00:34:05 -0400 |

Hi, I really want to help, but I am afraid I can't understand the problem. Partially because it seems to me there is a part of the email missing. Also, in Stata 'casewise' means observation as a whole, not 'individual variable' which I think you are confusing here. See here for examples: http://books.google.com/books?id=zCym0GtuRE4C&lpg=PA25&ots=i2igqfWYtu&pg=PA25#v=onepage&q&f=false I have reproduced the output of the all 51s, and have modified it to show 51 where appropriate in your example. You can reinstall the package. Best, Sergiy On Thu, Jun 27, 2013 at 10:12 PM, Haluk Vahaboglu <vahabo@hotmail.com> wrote: > Hi Sergiy, > I would like to thank you again for the below code you provided and the ado "ttesttab". > May I take your attention to the difference between outputs obtained by executing the code below and the "ttesttab" ado. > > The code you provided below returns "n" of variables correctly, which means this code treats missing values independently for each row (variable). > But the ttesttab command treats missing values in a different way. > > sysuse auto, clear > replace price = . in 1 > > The code returns: > price 51 > length 52 > weight 52 > headroom 52 > > ttesttab returns: > price 51 > length 51 > weight 51 > headroom 51 > > I believe missing values should be treated case-wise as returned with the code. Could you help to fix this problem with the "ttestab" ado. > > Regards > > > > > > > > > > > @page > {;} > .ExternalClass P > {margin-bottom:0.08in;} > > > > > > > > > > > @page > {;} > .ExternalClass P > {margin-bottom:0.08in;} > > > > Prof. Dr. Haluk Vahaboğlu > Istanbul Medeniyet > Üniversitesi, > Göztepe Eğitim ve Araştırma Hastanesi > Enfeksiyon Hastalıkları > ve Klinik Mikrobiyoloji ABD > Dr. Erkin Caddesi 34730 > Kadıköy / Istanbul TURKIYE > > > >> Date: Thu, 6 Jun 2013 18:38:57 -0400 >> Subject: Re: st: table formatting in stata >> From: serjradyakin@gmail.com >> To: statalist@hsphsun2.harvard.edu >> >> How about this? Sergiy >> >> sysuse auto, clear >> >> local vars "price length weight headroom" >> local gvar "foreign" >> >> >> local n=`:word count `vars'' >> matrix R=J(`n',7,.) >> matrix list R >> >> forval i=1/`n' { >> local w `:word `i' of `vars'' >> quietly ttest `w', by(`gvar') >> matrix R[`i',1]=r(N_1) >> matrix R[`i',2]=r(mu_1) >> matrix R[`i',3]=r(sd_1) >> matrix R[`i',4]=r(N_2) >> matrix R[`i',5]=r(mu_2) >> matrix R[`i',6]=r(sd_2) >> matrix R[`i',7]=r(p) >> } >> >> matrix coleq R = " " "Group 1" " " " " "Group 2" " " " " >> matrix colnames R = N mean SD N mean SD p >> matrix rownames R = `vars' >> >> matrix list R , format(%4.3f) >> >> On Thu, Jun 6, 2013 at 6:18 PM, Haluk Vahaboglu <vahabo@hotmail.com> wrote: >>> Sergiy, >>> Thank you for your contribution. >>> Unfortunately, tabstat do not generate a "p" value of T Test. I need n mean sd & "p" on a line. >>> Therefore, neither tabstat not tabstatmat resolve this problem. >>> >>> >>> Prof. Dr. Haluk Vahaboğlu >>> Istanbul Medeniyet >>> Üniversitesi, >>> Göztepe Eğitim ve Araştırma Hastanesi >>> Enfeksiyon Hastalıkları >>> ve Klinik Mikrobiyoloji ABD >>> Dr. Erkin Caddesi 34730 >>> Kadıköy / Istanbul TURKIYE >>> >>> >>> >>> >>> ---------------------------------------- >>>> Date: Thu, 6 Jun 2013 16:13:32 -0400 >>>> Subject: Re: st: table formatting in stata >>>> From: serjradyakin@gmail.com >>>> To: statalist@hsphsun2.harvard.edu >>>> >>>> Yes, it is possible: >>>> >>>> sysuse auto,clear >>>> tabtstat price weight length, stats(mean sd) >>>> >>>> If you need it transposed, (and I assume you do) then add an option >>>> save to the above, then use Austin Nichols' -tabstatmat- to put >>>> results into matrix and transpose it. Type: >>>> >>>> findit tabstatmat >>>> >>>> and follow instructions. >>>> >>>> Best, Sergiy >>>> >>>> >>>> On Thu, Jun 6, 2013 at 5:11 AM, Haluk Vahaboglu <vahabo@hotmail.com> wrote: >>>>> TD P { margin-bottom: 0in; }P { margin-bottom: 0.08in; } >>>>> >>>>> >>>>> Hello Everybody, >>>>> In our research papers we >>>>> mostly present continuous data in a table with comparison to cases vs >>>>> controls as "n mean SD and p (from Ttest)". Here is a brief >>>>> example of such a table: >>>>> >>>>> >>>>> >>>>> ................Cases / Controls >>>>> ........N mean (SD) N mean (SD)...p >>>>> Var1 >>>>> Var2 >>>>> >>>>> >>>>> >>>>> With STATA I use these >>>>> commands >>>>> >>>>> >>>>> >>>>> 1. "estpost tabstat age >>>>> VAR1 VAR2, by(C/C) s(n mean sd) c(s)" >>>>> 2. "esttab ., main(mean) >>>>> aux(sd) unstack noobs nonote wide compress label" >>>>> 3. "estpost ttest age >>>>> VAR1 VAR2, by(C/C) une w" >>>>> 4. "esttab ., cell("p >>>>> (fmt(3))")" >>>>> >>>>> >>>>> >>>>> and get two separate >>>>> tables "n mean SD" in one and "p" in the other. I afterwards >>>>> combine these two in one table formatted as mentioned above. >>>>> >>>>> >>>>> >>>>> Is there any simple way to >>>>> get a table with n-mean-SD-p all in one line for multiple continuous >>>>> variables? >>>>> Thanks again >>>>> note: sorry for the subject line of my previous message >>>>> >>>>> * >>>>> * For searches and help try: >>>>> * http://www.stata.com/help.cgi?search >>>>> * http://www.stata.com/support/faqs/resources/statalist-faq/ >>>>> * http://www.ats.ucla.edu/stat/stata/ >>>> >>>> * >>>> * For searches and help try: >>>> * http://www.stata.com/help.cgi?search >>>> * http://www.stata.com/support/faqs/resources/statalist-faq/ >>>> * http://www.ats.ucla.edu/stat/stata/ >>> >>> * >>> * For searches and help try: >>> * http://www.stata.com/help.cgi?search >>> * http://www.stata.com/support/faqs/resources/statalist-faq/ >>> * http://www.ats.ucla.edu/stat/stata/ >> >> * >> * For searches and help try: >> * http://www.stata.com/help.cgi?search >> * http://www.stata.com/support/faqs/resources/statalist-faq/ >> * http://www.ats.ucla.edu/stat/stata/ > > * > * For searches and help try: > * http://www.stata.com/help.cgi?search > * http://www.stata.com/support/faqs/resources/statalist-faq/ > * http://www.ats.ucla.edu/stat/stata/ * * For searches and help try: * http://www.stata.com/help.cgi?search * http://www.stata.com/support/faqs/resources/statalist-faq/ * http://www.ats.ucla.edu/stat/stata/

**Follow-Ups**:**RE: st: table formatting in stata***From:*Haluk Vahaboglu <vahabo@hotmail.com>

**References**:**st: Nonlinear least squares restrictions***From:*"G. Anderson" <ga274@cam.ac.uk>

**st: RE: Nonlinear least squares restrictions***From:*tshmak <tshmak@hku.hk>

**Re: st: RE: Nonlinear least squares restrictions***From:*"G. Anderson" <ga274@cam.ac.uk>

**RE: st: RE: Nonlinear least squares restrictions***From:*Haluk Vahaboglu <vahabo@hotmail.com>

**st: table formatting in stata***From:*Haluk Vahaboglu <vahabo@hotmail.com>

**Re: st: table formatting in stata***From:*Sergiy Radyakin <serjradyakin@gmail.com>

**RE: st: table formatting in stata***From:*Haluk Vahaboglu <vahabo@hotmail.com>

**Re: st: table formatting in stata***From:*Sergiy Radyakin <serjradyakin@gmail.com>

**RE: st: table formatting in stata***From:*Haluk Vahaboglu <vahabo@hotmail.com>

- Prev by Date:
**RE: st: table formatting in stata** - Next by Date:
**st: Stata 13 illustrative example data file** - Previous by thread:
**RE: st: table formatting in stata** - Next by thread:
**RE: st: table formatting in stata** - Index(es):