 |
Statalist archive (ordered by date)
(last updated Wed Oct 31 23:57:01 2012)
- Re: st: Questions Regarding Structural Equation Model (SEM)
- From: Yuval Arbel <yuval.arbel@gmail.com>
- Re: st: Questions Regarding Structural Equation Model (SEM)
- From: William Buchanan <william@williambuchanan.net>
- Re: st: Questions Regarding Structural Equation Model (SEM)
- From: Yuval Arbel <yuval.arbel@gmail.com>
- Re: st: Questions Regarding Structural Equation Model (SEM)
- From: William Buchanan <william@williambuchanan.net>
- [no subject]
- st: Questions Regarding Structural Equation Model (SEM)
- From: Yuval Arbel <yuval.arbel@gmail.com>
- Re: st: comparing xtdes-like patterns for variables
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: marginal effects for simultaneous changes in interacted variables
- From: David Quinn <dxquinnx@gmail.com>
- Re: st: marginal effects for simultaneous changes in interacted variables
- From: jpitblado@stata.com (Jeff Pitblado, StataCorp LP)
- Re: st: appending two survey data sets
- From: Stas Kolenikov <skolenik@gmail.com>
- st: appending two survey data sets
- From: Ameya Bondre <ameyabondre.jhsph@gmail.com>
- Re: st: Ologit question
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- Re: st: Ologit question
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: Ologit question
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- Re: st: Search Notes
- From: "William Gould, StataCorp LP" <wgould@stata.com>
- RE: st: Search Notes
- From: "Sarah Edgington" <sedging@ucla.edu>
- st: marginal effects for simultaneous changes in interacted variables
- From: David Quinn <dxquinnx@gmail.com>
- RE: st: CI for ri variance after melogit
- From: "Bontempo, Daniel E" <deb193@ku.edu>
- st: Two-Part Modeling: Using -margins- command to calculate predicted cost and confidence intervals
- From: "Weichle, Thomas" <Thomas.Weichle@va.gov>
- Re: st: Search Notes
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Search Notes
- From: Pedro Nakashima <nakashimapedrolist@gmail.com>
- Re: st: comparing xtdes-like patterns for variables
- From: László Sándor <sandorl@gmail.com>
- Re: st: Ologit question
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- Re: st: Trouble importing an Excel spreadsheet when the desired sheet is not the first sheet
- From: Aaron Kirkman <ak1795mailserv@gmail.com>
- Re: st: comparing xtdes-like patterns for variables
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: CI for ri variance after melogit
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: Trouble importing an Excel spreadsheet when the desired sheet is not the first sheet
- From: Steve Nakoneshny <scnakone@ucalgary.ca>
- st: comparing xtdes-like patterns for variables
- From: László Sándor <sandorl@gmail.com>
- st: Trouble importing an Excel spreadsheet when the desired sheet is not the first sheet
- From: Aaron Kirkman <ak1795mailserv@gmail.com>
- Re: st: Ologit question
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: Is there a way to use or emulate the behaviour of --predict-- with --by-- groups?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: SSM and GLLAPRED
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Is there a way to use or emulate the behaviour of --predict-- with --by-- groups?
- From: Aaron Kirkman <ak1795mailserv@gmail.com>
- Re: st: Search Notes
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Is there a way to use or emulate the behaviour of --predict-- with --by-- groups?
- From: Nick Cox <njcoxstata@gmail.com>
- st: xtivreg2: simple slopes specification
- From: Ari Dothan <ari.dothan@gmail.com>
- Re: st: Search Notes
- From: Pedro Nakashima <nakashimapedrolist@gmail.com>
- Re: st: Is there a way to use or emulate the behaviour of --predict-- with --by-- groups?
- From: Aaron Kirkman <ak1795mailserv@gmail.com>
- st: CI for ri variance after melogit
- From: "Bontempo, Daniel E" <deb193@ku.edu>
- st: Ologit question
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- st: SSM and GLLAPRED
- From: "McCullough, Kathleen" <kmccullough@cob.fsu.edu>
- Re: st: Questions abou svyset and svyselmlog
- From: Nick Cox <njcoxstata@gmail.com>
- st: Questions abou svyset and svyselmlog
- From: Luiz Gama <lcdgama@gmail.com>
- Re: st: Ologit question
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- st: lorenz ordinates and curve????
- From: Ajita Atreya <ajita63@hotmail.com>
- st: SARAR model: Cluster option????
- From: Ajita Atreya <ajita63@hotmail.com>
- Re: st: Ologit question
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- Re: st: Ologit question
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: somersd error message
- From: "Roger B. Newson" <r.newson@imperial.ac.uk>
- Re: st: Ologit question
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Ologit question
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- Re: st: Ologit question
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- Re: st: Ologit question
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: somersd error message
- From: "William Gould, StataCorp LP" <wgould@stata.com>
- Re: st: Ologit question
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- Re: st: Ologit question
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- Re: st: Ologit question
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Concentration Index for Binary Health Variable
- From: Abekah Nkrumah <ankrumah@gmail.com>
- Re: st: Ologit question
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- Re: st: Ologit question
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: Ologit question
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: somersd error message
- From: Barry Quinn <brotherbarry@me.com>
- st: Ologit question
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- Re: st: mi impute chained
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: mi impute chained
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: somersd error message
- From: "Roger B. Newson" <r.newson@imperial.ac.uk>
- Re: st: Do the symbols listed in -[G-4] text- have consistent Unicodes?
- From: "Roger B. Newson" <r.newson@imperial.ac.uk>
- st: svyset command
- From: Rebecca Pietrelli <rebecca.pietrelli@gmail.com>
- RE: st: CoxReg. XI may not be combined with by
- From: "Kirby Bradley (NATIONAL SERVICES SCOTLAND)" <bradley.kirby@nhs.net>
- Re: st: somersd error message
- From: Barry Quinn <brotherbarry@me.com>
- Re: st: somersd error message
- From: Barry Quinn <brotherbarry@me.com>
- Re: st: combining tables
- From: "Roger B. Newson" <r.newson@imperial.ac.uk>
- Re: st: somersd error message
- From: "Roger B. Newson" <r.newson@imperial.ac.uk>
- Re: st: somersd error message
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: somersd error message
- From: Barry Quinn <brotherbarry@me.com>
- Re: st: combining tables
- From: daniel klein <klein.daniel.81@googlemail.com>
- Re:Re: st: confidence intervals of predicted risk after stcox
- RE: st: mi impute chained
- From: chong shiauyun <shiauyun416@hotmail.com>
- Re: st: CoxReg. XI may not be combined with by
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Is there a way to use or emulate the behaviour of --predict-- with --by-- groups?
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: Is there a way to use or emulate the behaviour of --predict-- with --by-- groups?
- From: Aaron Kirkman <ak1795mailserv@gmail.com>
- Re: st: Search Notes
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: combining tables
- From: Daniel Feenberg <feenberg@nber.org>
- st: Search Notes
- From: Pedro Nakashima <nakashimapedrolist@gmail.com>
- Re: st: combining tables
- From: Nick Cox <njcoxstata@gmail.com>
- st: combining tables
- From: Rebecca Pope <rebecca.a.pope@gmail.com>
- Re: st: Do the symbols lorted in -[G-4] text- have consistent Unicodes?
- From: John Luke Gallup <jlgallup@pdx.edu>
- st: correct errors for the Heckman two-step method
- From: "Robinson, Adina Barbulescu" <adina.barbulescu@utk.edu>
- Re: st: confidence intervals of predicted risk after stcox
- From: Steve Samuels <sjsamuels@gmail.com>
- st: Do the symbols lorted in -[G-4] text- have consistent Unicodes?
- From: "Roger B. Newson" <r.newson@imperial.ac.uk>
- Re: st: -save- a varlist
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: -save- a varlist
- From: Daniel Feenberg <feenberg@nber.org>
- Re: st: selection equation Heckman
- From: urbain thierry YOGO <yogout@gmail.com>
- Re: R: st: intreg with control for sample selection and endogeneity bias
- From: urbain thierry YOGO <yogout@gmail.com>
- Re: st: selection equation Heckman
- From: Jeffrey Wooldridge <jmwooldridge60@gmail.com>
- AW: st: different fonts
- From: "Klaus Pforr" <kpforr@googlemail.com>
- Re: st: Re: aweight
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: -save- a varlist
- From: Nick Cox <njcoxstata@gmail.com>
- [no subject]
- st: Re: aweight
- From: Rita Luk <Rita.Luk@camh.ca>
- st: CoxReg. XI may not be combined with by
- From: "Kirby Bradley (NATIONAL SERVICES SCOTLAND)" <bradley.kirby@nhs.net>
- Re: st: -save- a varlist
- From: Jeph Herrin <stata@spandrel.net>
- Re: st: -save- a varlist
- From: Jeph Herrin <stata@spandrel.net>
- Re: st: Concentration Index for Binary Health Variable
- From: John Ataguba <johnataguba@yahoo.co.uk>
- Re: st: -save- a varlist
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: -save- a varlist
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: access coefficients from another regression
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: -save- a varlist
- From: Jeph Herrin <stata@spandrel.net>
- Re: st: different fonts
- From: Ryan Kessler <ryan.kessler.stata@gmail.com>
- Re: st: access coefficients from another regression
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: Interaction Variables with regards to xtabond2
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: MI margins
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: -save- a varlist
- From: daniel klein <klein.daniel.81@googlemail.com>
- Re: st: -save- a varlist
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: -save- a varlist
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: -save- a varlist
- From: Nick Cox <njcoxstata@gmail.com>
- st: -save- a varlist
- From: Jeph Herrin <stata@spandrel.net>
- Re: st: interpretation reciprocal causation ivprobit cdsimeq
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: Concentration Index for Binary Health Variable
- From: Nick Cox <njcoxstata@gmail.com>
- st: Concentration Index for Binary Health Variable
- From: Abekah Nkrumah <ankrumah@gmail.com>
- st: cmp and Vuong test
- From: Chris Rh <chrisrh@ymail.com>
- Re: st: mi impute: VCE is not positive definite
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: access coefficients from another regression
- From: Nick Cox <njcoxstata@gmail.com>
- st: access coefficients from another regression
- st: Interaction Variables with regards to xtabond2
- From: john ebireri <jebireri@yahoo.com>
- st: different fonts
- From: Klaus Pforr <kpforr@googlemail.com>
- Re: st: interpretation reciprocal causation ivprobit cdsimeq
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: mi impute: VCE is not positive definite
- From: Nick Cox <njcoxstata@gmail.com>
- st: fixed effects with time-invariant variable and interaction term
- From: Ferdinand Eibl <ferdinand.eibl@politics.ox.ac.uk>
- st: interpretation reciprocal causation ivprobit cdsimeq
- From: <Marianne.LEFEBVRE@ec.europa.eu>
- Re: st: total() returns zero if all missing in long-format data
- From: Shehzad Ali <drshehzad_ali@yahoo.com>
- st: mi impute: VCE is not positive definite
- From: chong shiauyun <shiauyun416@hotmail.com>
- Re: st: who we are (5,023 of us, more or less)
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: who we are (5,023 of us, more or less)
- From: David Kantor <kantor.d@att.net>
- Re: st: Re: st. aweight
- From: Steve Samuels <sjsamuels@gmail.com>
- Re: st: computing elasticities after using lpoly
- From: Austin Nichols <austinnichols@gmail.com>
- st: -xmluse-
- From: "Haiyong Xu" <hxu@mednet.ucla.edu>
- Re: R: st: intreg with control for sample selection and endogeneity bias
- From: "Justina Fischer" <JAVFischer@gmx.de>
- R: st: intreg with control for sample selection and endogeneity bias
- From: "Francesco Pastore" <francesco.pastore@unina2.it>
- R: st: intreg with control for sample selection and endogeneity bias
- From: "Francesco Pastore" <francesco.pastore@unina2.it>
- Re: st: intreg with control for sample selection and endogeneity bias
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: Lag operators on panel data inside -bysort-
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Lag operators on panel data inside -bysort-
- From: Richard Herron <richard.c.herron@gmail.com>
- st: Query on Dynamic Panel Technique / Granger Causality / Sargan Test
- From: Pejman Abedifar <pabedifar@gmail.com>
- Re: st: who we are (5,023 of us, more or less)
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Re: st. aweight
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: intreg with control for sample selection and endogeneity bias
- From: urbain thierry YOGO <yogout@gmail.com>
- [no subject]
- st: Re: st. aweight
- From: Rita Luk <Rita.Luk@camh.ca>
- Re: st: Multivariate kernel regression
- From: "Millimet, Daniel" <millimet@mail.smu.edu>
- Re: st: Multivariate kernel regression
- From: Josh Hyman <hyman.josh@gmail.com>
- Re: st: intreg with control for sample selection and endogeneity bias
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: aweight
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- st: intreg with control for sample selection and endogeneity bias
- From: "Francesco Pastore" <francesco.pastore@unina2.it>
- st: -xmluse-
- From: "Haiyong Xu" <hxu@mednet.ucla.edu>
- st: aweight
- From: Rita Luk <Rita.Luk@camh.ca>
- Re: st: who we are (5,023 of us, more or less)
- From: "Justina Fischer" <JAVFischer@gmx.de>
- st: who we are (5,023 of us, more or less)
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Lag operators on panel data inside -bysort-
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Create Timeline based on Dates
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Average If with Multiple Conditions
- From: Nick Cox <njcoxstata@gmail.com>
- st: writepsfrag now available on SSC
- From: Ryan Kessler <ryan.kessler.stata@gmail.com>
- st: -personage-
- From: Nick Cox <njcoxstata@gmail.com>
- st: Average If with Multiple Conditions
- From: Lisa Wang <lhwang0925@gmail.com>
- Re: st: Default Seed of Stata 12
- From: "William Gould, StataCorp LP" <wgould@stata.com>
- Re: st: Create Timeline based on Dates
- From: Lisa Wang <lhwang0925@gmail.com>
- Re: st: skipping rogue commas when importing csv file using -infile-
- From: Rob Shaw <rob.shaw.uk@gmail.com>
- st: Lag operators on panel data inside -bysort-
- From: Richard Herron <richard.c.herron@gmail.com>
- st: Treating interactions exogenously or endogenously in xtabond2
- From: john ebireri <jebireri@yahoo.com>
- Re: st: total() returns zero if all missing in long-format data
- From: Nick Cox <njcoxstata@gmail.com>
- st: MI margins
- From: "Goin, Dana" <DGoin@urban.org>
- Re: st: total() returns zero if all missing in long-format data
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: total() returns zero if all missing in long-format data
- From: Shehzad Ali <drshehzad_ali@yahoo.com>
- Re: st: Poisson and Negbin models
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: About -suest- and "Chow test"
- From: "Lynn Lee" <lynn09v@gmail.com>
- RE: st: Poisson and Negbin models
- From: Simon Falck <simon.falck@abe.kth.se>
- Re: st: Re: Queries about -cond()
- From: Nick Cox <njcoxstata@gmail.com>
- st: Re: Queries about -cond()
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Poisson and Negbin models
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: Endless iteration because of too many cases?
- From: Lucas <lucaselastic@gmail.com>
- RE: st: line width in time series graph
- From: Melanie Luen <Melanie.Luen@aucklandcouncil.govt.nz>
- Re: st: line width in time series graph
- From: Phil Clayton <philclayton@internode.on.net>
- st: line width in time series graph
- From: Melanie Luen <Melanie.Luen@aucklandcouncil.govt.nz>
- Re: st: computing elasticities after using lpoly
- From: Bert Lloyd <bert.lloyd.89@gmail.com>
- Re: st: computing elasticities after using lpoly
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: About -suest- and "Chow test"
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st:"endoegnous binary regressor"
- From: Austin Nichols <austinnichols@gmail.com>
- st: Poisson and Negbin models
- From: Simon Falck <simon.falck@abe.kth.se>
- st: Best practices for scientific computing
- From: Christopher Baum <kit.baum@bc.edu>
- st:"endoegnous binary regressor"
- From: Ayman Farahat <ayman.farahat@yahoo.com>
- Re: st: Splitting Dataset - Save by unique identifier
- From: Daniel Feenberg <feenberg@nber.org>
- Re: st: Is it possible to use --rename-- with the renumber option to rename variables in reverse order?
- From: Aaron Kirkman <ak1795mailserv@gmail.com>
- Re: st: Splitting Dataset - Save by unique identifier
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Splitting Dataset - Save by unique identifier
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Is it possible to use --rename-- with the renumber option to rename variables in reverse order?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Is it possible to use --rename-- with the renumber option to rename variables in reverse order?
- From: Phil Clayton <philclayton@internode.on.net>
- Re: st: Is it possible to use --rename-- with the renumber option to rename variables in reverse order?
- From: Aaron Kirkman <ak1795mailserv@gmail.com>
- RE: st: Is it possible to use --rename-- with the renumber option to rename variables in reverse order?
- From: "kantor.d@att.net" <kantor.d@att.net>
- Re: st: computing elasticities after using lpoly
- From: Bert Lloyd <bert.lloyd.89@gmail.com>
- st: Is it possible to use --rename-- with the renumber option to rename variables in reverse order?
- From: Aaron Kirkman <ak1795mailserv@gmail.com>
- st: Splitting Dataset - Save by unique identifier
- From: "Tim Streibel" <Tim.Streibel@gmx.de>
- Re: st: reclink type mismatch error
- From: Richard Herron <richard.c.herron@gmail.com>
- Re: st: reshaping data?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: reshaping data?
- st: Comparing interaction terms in simultaneous equations
- From: Steve Binggeli <binggeli.steve@gmail.com>
- re: RE: st: Area under the curve and C-statistics
- From: "Ariel Linden, DrPH" <ariel.linden@gmail.com>
- RE: re: RE: st: Area under the curve and C-statistics
- From: "Ariel Linden, DrPH" <ariel.linden@gmail.com>
- re: RE: st: Area under the curve and C-statistics
- From: "Ariel Linden, DrPH" <ariel.linden@gmail.com>
- Re: st: Dropping first 60 months of every Stock (Permno)
- From: "Tim Streibel" <Tim.Streibel@gmx.de>
- st: About -suest- and "Chow test"
- From: "Lynn Lee" <lynn09v@gmail.com>
- RE:st: confidence intervals of predicted risk after stcox
- Re: st: Dropping first 60 months of every Stock (Permno)
- From: WEBER Sylvain <sylvain.weber@unine.ch>
- st: Dropping first 60 months of every Stock (Permno)
- From: "Tim Streibel" <Tim.Streibel@gmx.de>
- Re: st: How to set calibrated weights
- From: Veronica Galassi <veronicagalassi@gmail.com>
- st: how to do multiple horizon causality test by Dufour and Renault
- From: Prakash Singh <prakashbhu@gmail.com>
- Re: st: Greek symbols missing in "graph export" to PDF and EPS
- From: Alan Riley <ariley@stata.com>
- Re: st: confidence intervals of predicted risk after stcox
- From: Steve Samuels <sjsamuels@gmail.com>
- RE: st: Area under the curve and C-statistics
- From: Abdelouahid Tajar <a_tajar@hotmail.co.uk>
- RE: st: Thread-Index: Ac2zpwBrnny9GG5FQQ6Vz7stZfQOCw==
- From: Amal Khanolkar <Amal.Khanolkar@ki.se>
- Re: st: Subtract Closest Cell Which has A Value
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Default Seed of Stata 12
- From: Stas Kolenikov <skolenik@gmail.com>
- Re: st: Thread-Index: Ac2zpwBrnny9GG5FQQ6Vz7stZfQOCw==
- From: Richard Goldstein <richgold@ix.netcom.com>
- st: Default Seed of Stata 12
- From: <S.Jenkins@lse.ac.uk>
- st: Thread-Index: Ac2zpwBrnny9GG5FQQ6Vz7stZfQOCw==
- From: Amal Khanolkar <Amal.Khanolkar@ki.se>
- Re: st: Plot histogram w/X axis in descending order?
- From: Nick Cox <njcoxstata@gmail.com>
- st: Plot histogram w/X axis in descending order?
- From: John Whitmer <jcwhitmer@ucdavis.edu>
- Re: st: skipping rogue commas when importing csv file using -infile-
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: How to set calibrated weights
- From: Steve Samuels <sjsamuels@gmail.com>
- st: RE: Make categories from a list within a variable
- From: "David Radwin" <dradwin@mprinc.com>
- Re: st: Make categories from a list within a variable
- From: daniel klein <klein.daniel.81@googlemail.com>
- st: Make categories from a list within a variable
- From: Lynne Morgan <lmorgan3@wisc.edu>
- Re: st: How to set calibrated weights
- From: Veronica Galassi <veronicagalassi@gmail.com>
- Re: st: xtmixed: Cross-level interaction only with random coefficients?
- From: Clyde B Schechter <clyde.schechter@einstein.yu.edu>
- Re: st: How to set calibrated weights
- From: Steve Samuels <sjsamuels@gmail.com>
- st: skipping rogue commas when importing csv file using -infile-
- From: Rob Shaw <rob.shaw.uk@gmail.com>
- re: st: Area under the curve and C-statistics
- From: "Ariel Linden, DrPH" <ariel.linden@gmail.com>
- re: st: binary_mediation - a clarification
- From: "Ariel Linden, DrPH" <ariel.linden@gmail.com>
- Re: st: reshaping data?
- From: Nick Cox <njcoxstata@gmail.com>
- [no subject]
- Re: st: How to set calibrated weights
- From: Veronica Galassi <veronicagalassi@gmail.com>
- Ang: Re: Re: st: calibrated weights
- From: Tomas Lind <tomas.lind@sll.se>
- Re: st: reshaping data?
- RE: st: inaccurate hessian from mata: deriv()
- From: Sun Yutao <yutao.sun.statalist@outlook.com>
- Re: st: mi impute chained
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- st: Greek symbols missing in "graph export" to PDF and EPS
- From: Marco Ercolani <m.g.ercolani@bham.ac.uk>
- st: Comparing incidence rates
- From: Mikkel Høiberg <mikkelhoiberg@gmail.com>
- st: From: Mikkel Høiberg <mikkelhoiberg@gmail.com>
- From: owner-statalist@hsphsun2.harvard.edu
- Re: st: reshaping data?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: reshaping data?
- st: confidence intervals of predicted risk after stcox
- Re: st: Re: PDF tables
- From: "Bianca B." <bianca268@yahoo.com>
- Re: st: Create Timeline based on Dates
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Subtract Closest Cell Which has A Value
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Create Timeline based on Dates
- From: Nick Cox <njcoxstata@gmail.com>
- st: RE: using -cond- to create a indicator
- From: "PHAM Ngoc Minh" <pham@ri.ncgm.go.jp>
- st: RE: using -cond- to create a indicator
- From: "PHAM Ngoc Minh" <pham@ri.ncgm.go.jp>
- Re: st: intcens: how to estimate mean and variance after intcens
- From: Yoann Madec <yoann.madec@pasteur.fr>
- Re: using -cond- to create a indicator [was: Re: st: intcens: how to estimate mean and variance after intcens]
- From: Nick Cox <njcoxstata@gmail.com>
- RE: st: mi impute chained
- From: chong shiauyun <shiauyun416@hotmail.com>
- using -cond- to create a indicator [was: Re: st: intcens: how to estimate mean and variance after intcens]
- From: Maarten Buis <maartenlbuis@gmail.com>
- RE: st: intcens: how to estimate mean and variance after intcens
- From: "PHAM Ngoc Minh" <pham@ri.ncgm.go.jp>
- Re: st: intcens: how to estimate mean and variance after intcens
- From: Steve Samuels <sjsamuels@gmail.com>
- Re: st: intcens: how to estimate mean and variance after intcens
- From: Steve Samuels <sjsamuels@gmail.com>
- st: convergence problems in mi impute chained
- From: chong shiauyun <shiauyun416@hotmail.com>
- st: Subtract Closest Cell Which has A Value
- From: Lisa Wang <lhwang0925@gmail.com>
- Re: Ang: Re: st: calibrated weights
- From: Steve Samuels <sjsamuels@gmail.com>
- Re: st: How to set calibrated weights
- From: Steve Samuels <sjsamuels@gmail.com>
- st: Create Timeline based on Dates
- From: Lisa Wang <lhwang0925@gmail.com>
- Re: st: xtgraph question
- From: Nick Cox <njcoxstata@gmail.com>
- st: xtgraph question
- From: "Earl, Jennifer Suzanne - (jenniferearl)" <jenniferearl@email.arizona.edu>
- SPAM (06.828) st: mayumi ikeda は不在にしております。
- From: mayumi.ikeda@mail.tdb.co.jp
- st: Area under the curve and C-statistics
- From: Amal Khanolkar <Amal.Khanolkar@ki.se>
- Re: st: inaccurate hessian from mata: deriv()
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Tabulating and graphing mean income for three groups over several years
- From: Mosi Ifatunji <ifatunji@gmail.com>
- Re: st: Tabulating and graphing mean income for three groups over several years
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Tabulating and graphing mean income for three groups over several years
- From: Nick Cox <njcoxstata@gmail.com>
- st: Tabulating and graphing mean income for three groups over several years
- From: Mosi Ifatunji <ifatunji@gmail.com>
- st: inaccurate hessian from mata: deriv()
- From: Sun Yutao <yutao.sun.statalist@outlook.com>
- RE: st: Stripplot: problem with axis for variable with only 2 observations
- From: "Meghan Doiron, Miss" <meghan.doiron@mail.mcgill.ca>
- Re: Re: st: calibrated weights
- From: Stas Kolenikov <skolenik@gmail.com>
- st: xtivreg related IV test statistics
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: xtivreg related IV test statistics
- From: Kirk Geale <kirkgeale@gmail.com>
- st: xtivreg related IV test statistics
- From: "Lynn Lee" <lynn09v@gmail.com>
- st: xtmixed: Cross-level interaction only with random coefficients?
- Re: st: reshaping data?
- Re: st: reshaping data?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: reshaping data?
- Re: st: reshaping data?
- From: Yuval Arbel <yuval.arbel@gmail.com>
- Re: st: reshaping data?
- From: Yuval Arbel <yuval.arbel@gmail.com>
- st: RE: statalist-digest V4 #4681
- From: "David Roodman (droodman@cgdev.org)" <DRoodman@cgdev.org>
- Re: st: reshaping data?
- From: Nick Cox <njcoxstata@gmail.com>
- st: reshaping data?
- st: reshaping data?
- Re: st: How to set calibrated weights
- From: Veronica Galassi <veronicagalassi@gmail.com>
- Re: st: Re: PDF tables
- From: William Buchanan <william@williambuchanan.net>
- st: Re: PDF tables
- From: "Bianca B." <bianca268@yahoo.com>
- Re: st: PDF tables
- From: William Buchanan <william@williambuchanan.net>
- st: binary_mediation - a clarification
- From: Paula Arce <paulaarce@rocketmail.com>
- st: PDF tables
- From: "Bianca B." <bianca268@yahoo.com>
- Re: st: mi impute chained
- From: ymarchenko@stata.com (Yulia Marchenko, StataCorp)
- Re: st: mi impute chained
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: estimation of short run coefficient in panel data with small time series and large cross section
- From: Prakash Singh <prakashbhu@gmail.com>
- Re: Re: st: calibrated weights
- From: Nick Cox <njcoxstata@gmail.com>
- Ang: Re: st: calibrated weights
- From: Tomas Lind <tomas.lind@sll.se>
- Re: st: estimation of short run coefficient in panel data with small time series and large cross section
- From: Muhammad Anees <anees@aneconomist.com>
- Re: st: Default Seed of Stata 12
- From: Henrik Støvring <STOVRING@biostat.au.dk>
- Re: st: estimation of short run coefficient in panel data with small time series and large cross section
- From: Prakash Singh <prakashbhu@gmail.com>
- Re: st: Re: How to generate quantile categories by group/varlist?
- From: Alika Tuwo <alika.tuwo@gmail.com>
- st: how to get VIF(for multicollinearity testing) after - treatreg -
- From: Ye SUN <sunye74stata@gmail.com>
- Re: st: intcens: how to estimate mean and variance after intcens
- From: Yoann Madec <yoann.madec@pasteur.fr>
- Re: st: Re: How to generate quantile categories by group/varlist?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: estimation of short run coefficient in panel data with small time series and large cross section
- From: Muhammad Anees <anees@aneconomist.com>
- st: estimation of short run coefficient in panel data with small time series and large cross section
- From: Prakash Singh <prakashbhu@gmail.com>
- st: Re: How to generate quantile categories by group/varlist?
- From: Alika Tuwo <alika.tuwo@gmail.com>
- st: mi impute chained
- From: chong shiauyun <shiauyun416@hotmail.com>
- st: Sample size caluculation
- From: Mrs Mohana Rajmokan <mohana.rajmokan@uqconnect.edu.au>
- Re: st: how to get statistics in panel
- From: Muhammad Anees <anees@aneconomist.com>
- Re: st: mi impute chained error messages
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: reclink type mismatch error
- From: Richard Herron <richard.c.herron@gmail.com>
- st: how to get statistics in panel
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: suppressing low frequency observations in tabulation
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Stripplot: problem with axis for variable with only 2 observations
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Stripplot: problem with axis for variable with only 2 observations
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: suppressing low frequency observations in tabulation
- From: Nick Cox <njcoxstata@gmail.com>
- st: suppressing low frequency observations in tabulation
- From: Kevin McConeghy <kevinmcconeghy@gmail.com>
- Re: st: calibrated weights
- From: Steve Samuels <sjsamuels@gmail.com>
- Re: st: How to set calibrated weights
- From: Steve Samuels <sjsamuels@gmail.com>
- st: Stripplot: problem with axis for variable with only 2 observations
- From: "Meghan Doiron, Miss" <meghan.doiron@mail.mcgill.ca>
- Re: st: reclink type mismatch error
- From: Michael Blasnik <michael.blasnik@gmail.com>
- Re: st: Loop with capture
- From: Daniel Escher <descher@nd.edu>
- Re: st: Loop with capture
- From: Nick Cox <njcoxstata@gmail.com>
- st: Loop with capture
- From: Daniel Escher <descher@nd.edu>
- st: RE: how to get statistics in panel
- From: "Jacobs, David" <jacobs.184@sociology.osu.edu>
- Re: st: Start values for MLE with xtmixed
- From: Arne Risa Hole <arnehole@gmail.com>
- Re: st: Default Seed of Stata 12
- From: "William Gould, StataCorp LP" <wgould@stata.com>
- RE: st: Default Seed of Stata 12
- From: "David Radwin" <dradwin@mprinc.com>
- st: how to get statistics in panel
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: Adjusted Prevalence from Logistic models
- From: Dean Eurich <deurich@ualberta.ca>
- Re: st: How to set calibrated weights
- From: Veronica Galassi <veronicagalassi@gmail.com>
- st: Accounting for panel nature in a mixed process IV model?
- From: Kirk Geale <kirkgeale@gmail.com>
- st: AIC in fitstat
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: How to set calibrated weights
- From: Steve Samuels <sjsamuels@gmail.com>
- RE: st: eclass program based on cmp
- From: "David Roodman (droodman@cgdev.org)" <DRoodman@cgdev.org>
- Re: st: AIC in fitstat
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: Start values for MLE with xtmixed
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: AIC in fitstat
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: calibrated weights
- From: Veronica Galassi <veronicagalassi@gmail.com>
- Re: st: AIC in fitstat
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- st: AIC in fitstat
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: Plotting Residuals vs Fitted Values using GLM
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Adjusted Prevalence from Logistic models
- From: Phil Clayton <philclayton@internode.on.net>
- Re: st: Adjusted Prevalence from Logistic models
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: calibrated weights
- From: Tomas Lind <tomas.lind@sll.se>
- Re: st: sum issue (wrong values)
- From: Christian Bärtsch <christian.baertsch@student.unisg.ch>
- RE: st: Adjusted Prevalence from Logistic models
- From: Abdelouahid Tajar <a_tajar@hotmail.co.uk>
- Re: st: sum issue (wrong values)
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: how can I use noof obs in Syntax
- From: Daniel Feenberg <feenberg@nber.org>
- Re: st: interviewereffect-multilevelmodeling
- From: Stas Kolenikov <skolenik@gmail.com>
- Re: st: sum issue (wrong values)
- From: Christian Bärtsch <christian.baertsch@student.unisg.ch>
- Re: st: sum issue (wrong values)
- From: daniel klein <klein.daniel.81@googlemail.com>
- st: interviewereffect-multilevelmodeling
- From: Srinivas <geevasan@yahoo.com>
- Re: st: sum issue (wrong values)
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: sum issue (wrong values)
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: sum issue (wrong values)
- From: daniel klein <klein.daniel.81@googlemail.com>
- Re: st: sum issue (wrong values)
- From: Christian Bärtsch <christian.baertsch@student.unisg.ch>
- Re: st: sum issue (wrong values)
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: sum issue (wrong values)
- From: Nick Cox <njcoxstata@gmail.com>
- st: sum issue (wrong values)
- From: Christian Bärtsch <christian.baertsch@student.unisg.ch>
- Re: st: How Can I Store a Variable's Label to Label Another Variable?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Adjusted Prevalence from Logistic models
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: How Can I Store a Variable's Label to Label Another Variable?
- From: Charalambos Karagiannakis <karagiannakis.charalambos@ucy.ac.cy>
- RE: st: Adjusted Prevalence from Logistic models
- From: Abdelouahid Tajar <a_tajar@hotmail.co.uk>
- RE: st: how to store matrix in a data file
- From: "rasool.bux" <rasool.bux@aku.edu>
- Re: st: how can I use noof obs in Syntax
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: how can I use noof obs in Syntax
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Default Seed of Stata 12
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: how to store matrix in a data file
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Adjusted Prevalence from Logistic models
- From: Richard Williams <richardwilliams.ndu@gmail.com>
- Re: st: Start values for MLE with xtmixed
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: Adjusted Prevalence from Logistic models
- From: Dean Eurich <deurich@ualberta.ca>
- RE: st: how to store matrix in a data file
- From: "rasool.bux" <rasool.bux@aku.edu>
- st: how can I use noof obs in Syntax
- From: "rasool.bux" <rasool.bux@aku.edu>
- st: Default Seed of Stata 12
- From: "rasool.bux" <rasool.bux@aku.edu>
- st: Start values for MLE with xtmixed
- From: Justina Kamiel Grayman <justina.grayman@nyu.edu>
- RE: st: mi impute chained error messages
- From: chong shiauyun <shiauyun416@hotmail.com>
- st: Solution Sought for BCa CI cannot be computed
- From: Donna L Quadri <quadri@nyu.edu>
- Re: st: forvalues
- From: solafem7@yahoo.co.uk
- Re: st: get the current path
- From: Stas Kolenikov <skolenik@gmail.com>
- Re: st: get the current path
- From: Nick Cox <njcoxstata@gmail.com>
- st: Plotting Residuals vs Fitted Values using GLM
- From: Brent Gibbons <brent.gibbons@gmail.com>
- RE: st: get the current path
- From: Sun Yutao <yutao.sun.statalist@outlook.com>
- Re: st: get the current path
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: get the current path
- From: Nick Cox <njcoxstata@gmail.com>
- st: RE: RE: RE: RE: different results ivregress ivreg2
- From: Michael Betz <betz.40@buckeyemail.osu.edu>
- st: get the current path
- From: Sun Yutao <yutao.sun.statalist@outlook.com>
- st: RE: RE: RE: different results ivregress ivreg2
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: reclink type mismatch error
- From: Richard Herron <richard.c.herron@gmail.com>
- st: ARIMA with endogenous covariates
- From: Ayman Farahat <ayman.farahat@yahoo.com>
- st: Updated R Workshops
- From: "Muenchen, Robert A (Bob)" <muenchen@utk.edu>
- Re: st: Demeaning TFP
- From: SAM MCCAW <sam2stata@gmail.com>
- Re: st: mi impute chained error messages
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: Fill in values for year in an unbalanced panel with known order
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Fill in values for year in an unbalanced panel with known order
- From: Fernando Luco <flucoestatalist@gmail.com>
- Re: st: Fill in values for year in an unbalanced panel with known order
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: forvalues
- From: William Buchanan <william@williambuchanan.net>
- st: Fill in values for year in an unbalanced panel with known order
- From: Fernando Luco <flucoestatalist@gmail.com>
- Re: st: Windows 8
- From: jhassell@stata.com (James Hassell)
- st: RE: RE: different results ivregress ivreg2
- From: Michael Betz <betz.40@buckeyemail.osu.edu>
- Re: st: forvalues
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: forvalues
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: forvalues
- From: - <dimpol7@googlemail.com>
- Re: st: forvalues
- From: - <dimpol7@googlemail.com>
- Re: st: forvalues
- From: William Buchanan <william@williambuchanan.net>
- Re: st: forvalues
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: forvalues
- From: - <dimpol7@googlemail.com>
- Re: st: forvalues
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: forvalues
- From: - <dimpol7@googlemail.com>
- Re: st: forvalues
- From: Henrik Støvring <STOVRING@biostat.au.dk>
- Re: st: forvalues
- From: - <dimpol7@googlemail.com>
- Re: st: forvalues
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: forvalues
- From: William Buchanan <william@williambuchanan.net>
- Re: st: forvalues
- From: Henrik Støvring <STOVRING@biostat.au.dk>
- Re: st: forvalues
- From: - <dimpol7@googlemail.com>
- Re: st: forvalues
- From: Henrik Støvring <STOVRING@biostat.au.dk>
- st: forvalues
- From: - <dimpol7@googlemail.com>
- Re: st: How do I store the value of an observation to a note?
- From: Aaron Kirkman <ak1795mailserv@gmail.com>
- st: Re: st: Re: st: Export Excel – multiple worksheets
- From: "Kathrin Jacobs" <jacobs.1@gmx.net>
- Re: st: Using "stata" command from Mata
- From: Nick Cox <njcoxstata@gmail.com>
- RE: st: Using "stata" command from Mata
- From: David Bell <d.n.f.bell@stir.ac.uk>
- Re: st: Using "stata" command from Mata
- From: Nick Cox <njcoxstata@gmail.com>
- st: Using "stata" command from Mata
- From: David Bell <d.n.f.bell@stir.ac.uk>
- st: Esttab: Dummy variable coefficient not found
- From: emanuele mazzini <madsoenistata@gmail.com>
- st: Re: st: Re: st: Export Excel – multiple worksheets
- From: Nick Cox <njcoxstata@gmail.com>
- st: Re: st: Export Excel – multiple worksheets
- From: daniel klein <klein.daniel.81@googlemail.com>
- st: Re: st: Export Excel – multiple worksheets
- From: daniel klein <klein.daniel.81@googlemail.com>
- st: Re: st: Re: st: Export Excel – multiple worksheets
- From: Nick Cox <njcoxstata@gmail.com>
- st: Re: st: Export Excel – multiple worksheets
- From: Muhammad Anees <anees@aneconomist.com>
- st: Export Excel – multiple worksheets
- From: "Kathrin Jacobs" <jacobs.1@gmx.net>
- Re: st: how to store matrix in a data file
- From: Maarten Buis <maartenlbuis@gmail.com>
- RE: st: mi impute chained error messages
- From: chong shiauyun <shiauyun416@hotmail.com>
- st: how to store matrix in a data file
- From: "rasool.bux" <rasool.bux@aku.edu>
- Re: st: How do I store the value of an observation to a note?
- From: Phil Clayton <philclayton@internode.on.net>
- st: How do I store the value of an observation to a note?
- From: Aaron Kirkman <ak1795mailserv@gmail.com>
- Re: st: how to get age in number of years, months and days
- From: jose maria pacheco de souza <jmpsouza@usp.br>
- st: Re: Windows 8
- From: "Joseph Coveney" <jcoveney@bigplanet.com>
- st: RE: RE: RE: -esttab- with ivreg2
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: RE: different results ivregress ivreg2
- From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
- st: Windows 8
- From: jhassell@stata.com (James Hassell)
- Re: st: different results ivregress ivreg2 (Out of office until 29 Oct 2012)
- From: <Eveline.Nuesch@lshtm.ac.uk>
- Re: st: different results ivregress ivreg2 (Out of office until 29 Oct 2012)
- From: <Eveline.Nuesch@lshtm.ac.uk>
- st: different results ivregress ivreg2
- From: Michael Betz <betz.40@buckeyemail.osu.edu>
- st: RE: RE: -esttab- with ivreg2
- From: Michael Betz <betz.40@buckeyemail.osu.edu>
- st: RE: -esttab- with ivreg2
- From: Michael Betz <betz.40@buckeyemail.osu.edu>
- Re: st: xmelogit error message
- From: Nick Cox <njcoxstata@gmail.com>
- st: -esttab- with ivreg2
- From: Michael Betz <betz.40@buckeyemail.osu.edu>
- Re: st: xmelogit error message
- From: KOTa <kota.alba@gmail.com>
- Re: st: Beta's and xtmixed
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: Beta's and xtmixed
- From: Richard Goldstein <richgold@ix.netcom.com>
- Re: st: Beta's and xtmixed
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: Split string variable
- From: Suryadipta Roy <sroy2138@gmail.com>
- st: Squared terms divided by 100 with factor variables
- From: Nikolaos Kanellopoulos <nkkanel@yahoo.gr>
- Re: st: How to insert scalars (elements from Stata's matricies) as locals' values in the 'forvalues' command?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: mi impute chained error messages
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: Split string variable
- From: daniel klein <klein.daniel.81@googlemail.com>
- Re: st: xmelogit error message
- From: Nick Cox <njcoxstata@gmail.com>
- st: Split string variable
- From: Suryadipta Roy <sroy2138@gmail.com>
- st: critical value
- From: "Lynn Lee" <lynn09v@gmail.com>
- st: xmelogit error message
- From: KOTa <kota.alba@gmail.com>
- Re: st: Identifying Experiment subjects that belong in both the Placebo and Experiment Groups
- From: Nick Cox <njcoxstata@gmail.com>
- st: Creating the group(matching) variable for clogit
- From: "Murphy, Neil" <neil.murphy08@imperial.ac.uk>
- Re: st: Identifying Experiment subjects that belong in both the Placebo and Experiment Groups
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Identifying Experiment subjects that belong in both the Placebo and Experiment Groups
- From: Beatrice Benavidez <beatricestata1711@gmail.com>
- Re: st: critical value
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: critical value
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: critical value
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: Beta's and xtmixed
- From: Filip Van Droogenbroeck <filip.van.droogenbroeck@vub.ac.be>
- st: oligit interpretation
- From: "Lynn Lee" <lynn09v@gmail.com>
- st: critical value
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: Loop year variable
- From: emanuele mazzini <madsoenistata@gmail.com>
- RE: st: How to insert scalars (elements from Stata's matricies) as locals' values in the 'forvalues' command?
- From: Charalambos Karagiannakis <karagiannakis.charalambos@ucy.ac.cy>
- Re: st: Loop year variable
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: oligit interpretation
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Loop year variable
- From: emanuele mazzini <madsoenistata@gmail.com>
- Re: st: critical value
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: critical value
- From: Nick Cox <njcoxstata@gmail.com>
- st: critical value
- From: "Lynn Lee" <lynn09v@gmail.com>
- st: oligit interpretation
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: Mkmat doesn't seem to store the observation values correctly?
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: mi impute chained error messages
- From: chong shiauyun <shiauyun416@hotmail.com>
- st: Semiparametric estimation of single-index models
- From: Daniel Stuart <daniel.stuart78@gmail.com>
- Re: st: -tabplot- updated on SSC
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Loop year variable
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Loop year variable
- From: emanuele mazzini <madsoenistata@gmail.com>
- st: eclass program based on cmp
- From: Benjamin Villena <b_villena@yahoo.com>
- re: st: -tabplot- updated on SSC
- From: "Ariel Linden, DrPH" <ariel.linden@gmail.com>
- Re: st: NLS per individual
- From: Nick Cox <njcoxstata@gmail.com>
- st: NLS per individual
- From: Anton Goeree <antongoeree@gmail.com>
- st: Question about output into Latex
- From: "Lynn Lee" <lynn09v@gmail.com>
- st: Question about output into Latex
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: Loop year variable
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Loop year variable
- From: emanuele mazzini <madsoenistata@gmail.com>
- Re: st: Identifying Experiment subjects that belong in both the Placebo and Experiment Groups
- From: Nick Cox <njcoxstata@gmail.com>
- st: Identifying Experiment subjects that belong in both the Placebo and Experiment Groups
- From: Beatrice Benavidez <beatricestata1711@gmail.com>
- Re: st: Loop year variable
- From: Nick Cox <njcoxstata@gmail.com>
- st: Loop year variable
- From: emanuele mazzini <madsoenistata@gmail.com>
- RE: st: product of a variable
- From: Sun Yutao <yutao.sun.statalist@outlook.com>
- Re: st: Mkmat doesn't seem to store the observation values correctly?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Mkmat doesn't seem to store the observation values correctly?
- From: "Tim Streibel" <Tim.Streibel@gmx.de>
- Re: st: Mkmat doesn't seem to store the observation values correctly?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: how to get age in number of years, months and days
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Mkmat doesn't seem to store the observation values correctly?
- From: "Tim Streibel" <Tim.Streibel@gmx.de>
- Re: st: How to record the first occurrence of the event?
- From: Nick Cox <njcoxstata@gmail.com>
- st: How to record the first occurrence of the event?
- From: Roxannie Wankel <roxanniew@gmail.com>
- Re: st: Mkmat doesn't seem to store the observation values correctly?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: How to set calibrated weights
- From: Veronica Galassi <veronicagalassi@gmail.com>
- st: Mkmat doesn't seem to store the observation values correctly?
- From: "Tim Streibel" <Tim.Streibel@gmx.de>
- Re: st: computing elasticities after using lpoly
- From: Arka Roy Chaudhuri <gabuisi@gmail.com>
- Re: st: how to get age in number of years, months and days
- From: Phil Clayton <philclayton@internode.on.net>
- Re: st: pca and predict--confusion about what it does
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: pca and predict--confusion about what it does
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: pca and predict--confusion about what it does
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: How to set calibrated weights
- From: Steve Samuels <sjsamuels@gmail.com>
- Re: st: pca and predict--confusion about what it does
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: product of a variable
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: product of a variable
- From: jose maria pacheco de souza <jmpsouza@usp.br>
- Re: st: pca and predict--confusion about what it does
- From: Israel Pearce <ra.frbsf@gmail.com>
- st: product of a variable
- From: Sun Yutao <yutao.sun.statalist@outlook.com>
- Re: st: Extract year of maximum production
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: pca and predict--confusion about what it does
- From: Nick Cox <njcoxstata@gmail.com>
- st: pca and predict--confusion about what it does
- From: Israel Pearce <ra.frbsf@gmail.com>
- Re: st: Stata versions
- From: Muhammad Anees <anees@aneconomist.com>
- st: Stata versions
- From: "Shittu, Aminu" <ameen_vet@yahoo.com>
- st: musings on the vce architecture: ways to implement improvements to robust and clustered standard errors
- From: László Sándor <sandorl@gmail.com>
- re: Re: st: mlabel on marginsplot?
- From: "Ariel Linden, DrPH" <ariel.linden@gmail.com>
- re: st: -tabplot- updated on SSC
- From: "Airey, David C" <david.airey@vanderbilt.edu>
- Re: st: how to get age in number of years, months and days
- From: jose maria pacheco de souza <jmpsouza@usp.br>
- Re: st: Extract year of maximum production
- From: Daniel Escher <descher@nd.edu>
- st: SSC Archive updates
- From: Christopher Baum <kit.baum@bc.edu>
- st: RE: Re: "eval" in Mata?
- From: Sun Yutao <yutao.sun.statalist@outlook.com>
- Re: st: how to get age in number of years, months and days
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: How to set calibrated weights
- From: Veronica Galassi <veronicagalassi@gmail.com>
- st: -tabplot- updated on SSC
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Extract year of maximum production
- From: Nick Cox <njcoxstata@gmail.com>
- st: Re: "eval" in Mata?
- From: "Joseph Coveney" <jcoveney@bigplanet.com>
- st: Extract year of maximum production
- From: Daniel Escher <descher@nd.edu>
- Re: st: How to set calibrated weights
- From: Steve Samuels <sjsamuels@gmail.com>
- Re: st: mlabel on marginsplot?
- From: Steve Samuels <sjsamuels@gmail.com>
- Re: st: Why does Stata return an invalid syntax error in this ado file?
- From: Aaron Kirkman <ak1795mailserv@gmail.com>
- Re: st: Why does Stata return an invalid syntax error in this ado file?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Why does Stata return an invalid syntax error in this ado file?
- From: Nick Cox <njcoxstata@gmail.com>
- st: Why does Stata return an invalid syntax error in this ado file?
- From: Aaron Kirkman <ak1795mailserv@gmail.com>
- Re: st: Multivariate kernel regression
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: mlabel on marginsplot?
- From: Phil Clayton <philclayton@internode.on.net>
- st: access information criteria after treatreg twostep
- From: "Oberdabernig, Doris Anita" <Doris.Oberdabernig@wu.ac.at>
- RE: re: Re: Re: st: mlabel on marginsplot?
- From: "Ariel Linden, DrPH" <ariel.linden@gmail.com>
- st: "eval" in Mata?
- From: Sun Yutao <yutao.sun.statalist@outlook.com>
- Re: st: how to escalate coefficients using outreg2 or a similar program?
- From: John Luke Gallup <jlgallup@pdx.edu>
- RE: st: bcal
- From: betaidi2 <betaidi2@msn.com>
- Re: st: most requested *simple* features to help SPSS users transition
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- st: How to set calibrated weights
- From: Veronica Galassi <veronicagalassi@gmail.com>
- Re: st: most requested *simple* features to help SPSS users transition
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: most requested *simple* features to help SPSS users transition
- From: Donald Spady <dspady@ualberta.ca>
- RE: st: most requested *simple* features to help SPSS users transition
- From: "David Radwin" <dradwin@mprinc.com>
- Re: st: Multivariate kernel regression
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: most requested *simple* features to help SPSS users transition
- From: Nick Cox <njcoxstata@gmail.com>
- : st: Normally distributed error term & testing normality of residuals
- From: "Seed, Paul" <paul.seed@kcl.ac.uk>
- Re: st: bcal
- From: David Kantor <kantor.d@att.net>
- Re: st: most requested *simple* features to help SPSS users transition
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- Re: st: Multivariate kernel regression
- From: Josh Hyman <hyman.josh@gmail.com>
- st: bcal
- From: betaidi2 <betaidi2@msn.com>
- Re: st: most requested *simple* features to help SPSS users transition
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: most requested *simple* features to help SPSS users transition
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: most requested *simple* features to help SPSS users transition
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- Re: st: most requested *simple* features to help SPSS users transition
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: most requested *simple* features to help SPSS users transition
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: most requested *simple* features to help SPSS users transition
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: most requested *simple* features to help SPSS users transition
- From: Fred Wolfe <fwolfe@arthritis-research.org>
- Re: st: most requested *simple* features to help SPSS users transition
- From: Stas Kolenikov <skolenik@gmail.com>
- st: most requested *simple* features to help SPSS users transition
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- re: Re: Re: st: mlabel on marginsplot?
- From: "Ariel Linden, DrPH" <ariel.linden@gmail.com>
- Re: st: Test for significance of the difference between knee locations?
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: Outlier diagnostics for tobit (postestimation)
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: analysing experimental panel data
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- Re: st: analysing experimental panel data
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- st: interpretation reciprocal causation ivprobit cdsimeq
- From: <Marianne.LEFEBVRE@ec.europa.eu>
- Re: st: Test for significance of the difference between knee locations?
- From: "Roger B. Newson" <r.newson@imperial.ac.uk>
- Re: st: Outlier diagnostics for tobit (postestimation)
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Outlier diagnostics for tobit (postestimation)
- From: "Timo Beck" <timoworldwide@gmx.de>
- Re: st: How to insert scalars (elements from Stata's matricies) as locals' values in the 'forvalues' command?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Outlier diagnostics for tobit (postestimation)
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Outlier diagnostics for tobit (postestimation)
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: Getting Beta's with esttab after xtmixed
- From: Filip Van Droogenbroeck <filip.van.droogenbroeck@vub.ac.be>
- Re: st: Increase/Decrease Decimal Places without Graph Editor
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Outlier diagnostics for tobit (postestimation)
- From: "Timo Beck" <timoworldwide@gmx.de>
- Re: st: Increase/Decrease Decimal Places without Graph Editor
- From: Lisa Wang <lhwang0925@gmail.com>
- Re: st: Increase/Decrease Decimal Places without Graph Editor
- From: Nick Cox <njcoxstata@gmail.com>
- st: Increase/Decrease Decimal Places without Graph Editor
- From: Lisa Wang <lhwang0925@gmail.com>
- Re: st: Outlier diagnostics for tobit (postestimation)
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Outlier diagnostics for tobit (postestimation)
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Test for significance of the difference between knee locations?
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: how to escalate coefficients using outreg2 or a similar program?
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: How to insert scalars (elements from Stata's matricies) as locals' values in the 'forvalues' command?
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: How to insert scalars (elements from Stata's matricies) as locals' values in the 'forvalues' command?
- From: Charalambos Karagiannakis <karagiannakis.charalambos@ucy.ac.cy>
- st: time averaged exposure in -stcox-
- From: Gloria Chi <stata.glochi@gmail.com>
- Re: st: analysing experimental panel data
- From: Yuval Arbel <yuval.arbel@gmail.com>
- RE: st: analysing experimental panel data
- From: Matthew Sunderland <matthews@unsw.edu.au>
- Re: st: RE: Meta-Analysis using --metan-- how to ensure comparison to ES=1 not ES=0
- From: Belinda Butcher <bbutcher@writesourcemedical.com.au>
- Re: st: how to get age in number of years, months and days
- From: jose maria pacheco de souza <jmpsouza@usp.br>
- Re: st: how to get age in number of years, months and days
- From: Muhammad Anees <anees@aneconomist.com>
- Re: st: Test for significance of the difference between knee locations?
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- Re: st: Test for significance of the difference between knee locations?
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: how to get age in number of years, months and days
- From: jose maria pacheco de souza <jmpsouza@usp.br>
- Re: st: how to get age in number of years, months and days
- From: Nick Cox <njcoxstata@gmail.com>
- st: Date: Thu, 18 Oct 2012 19:21:23 -0400
- From: Jeremy Kronick <jeremykronick@hotmail.com>
- st: re: error message using varlmar command
- From: Jeremy Kronick <jeremykronick@hotmail.com>
- Re: st: Unable to use "replace" on specific values (but others work ok)
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Outlier diagnostics for tobit (postestimation)
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: Unable to use "replace" on specific values (but others work ok)
- From: Anna Reimondos <areimondos@gmail.com>
- Re: st: Test for significance of the difference between knee locations?
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- st: how to get age in number of years, months and days
- From: jose maria pacheco de souza <jmpsouza@usp.br>
- Re: st: Test for significance of the difference between knee locations?
- From: "Millimet, Daniel" <millimet@mail.smu.edu>
- Re: st: Test for significance of the difference between knee locations?
- From: Jordan Silberman <silberman.stata@gmail.com>
- Re: st: Test for significance of the difference between knee locations?
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: Test for significance of the difference between knee locations?
- From: Yuval Arbel <yuval.arbel@gmail.com>
- Re: st: Test for significance of the difference between knee locations?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Test for significance of the difference between knee locations?
- From: Yuval Arbel <yuval.arbel@gmail.com>
- Re: st: Test for significance of the difference between knee locations?
- From: Yuval Arbel <yuval.arbel@gmail.com>
- Re: st: Test for significance of the difference between knee locations?
- From: "Roger B. Newson" <r.newson@imperial.ac.uk>
- st: Creating tables
- From: Amal Khanolkar <Amal.Khanolkar@ki.se>
- st: Test for significance of the difference between knee locations?
- From: Jordan Silberman <silberman.stata@gmail.com>
- Re: st: Outlier diagnostics for tobit (postestimation)
- From: Nick Cox <njcoxstata@gmail.com>
- st: Outlier diagnostics for tobit (postestimation)
- From: timoworldwide@gmx.de
- Re: st: how to escalate coefficients using outreg2 or a similar program?
- From: Benjamin Villena <b_villena@yahoo.com>
- st: spatdiag
- From: "Bianca B." <bianca268@yahoo.com>
- Re: st: how to escalate coefficients using outreg2 or a similar program?
- From: Benjamin Villena <b_villena@yahoo.com>
- Re: st: analysing experimental panel data
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- st: Wild Bootstrap for Tobit
- From: Maria Navarro <maria.statalist@gmail.com>
- Re: st: analysing experimental panel data
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- Re: st: mlabel on marginsplot?
- From: "Roger B. Newson" <r.newson@imperial.ac.uk>
- Re: Re: st: mlabel on marginsplot?
- From: Scott Merryman <scott.merryman@gmail.com>
- Re: st: Batch renaming variables
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: ipfweight command. Clarification of population margins
- From: Johanna Birnir <jkbirnir@gmail.com>
- Re: st: Batch renaming variables
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Batch renaming variables
- From: Wameq Raza <wameq.r@gmail.com>
- Re: st: RE: Dropping Observations based on Observations Across Rows
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Batch renaming variables
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: Re: st: mlabel on marginsplot?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Batch renaming variables
- From: Nick Cox <njcoxstata@gmail.com>
- st: RE: Dropping Observations based on Observations Across Rows
- From: Beatrice Benavidez <beatricestata1711@gmail.com>
- re: Re: st: mlabel on marginsplot?
- From: "Ariel Linden, DrPH" <ariel.linden@gmail.com>
- Re: st: Batch renaming variables
- From: Wameq Raza <wameq.r@gmail.com>
- Re: st: Batch renaming variables
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Batch renaming variables
- From: Wameq Raza <wameq.r@gmail.com>
- Re: st: Batch renaming variables
- From: David Kantor <kantor.d@att.net>
- Re: st: Batch renaming variables
- From: Wameq Raza <wameq.r@gmail.com>
- Re: st: Batch renaming variables
- From: saqlain raza <bhatti_sb@yahoo.com>
- st: Batch renaming variables
- From: Wameq Raza <wameq.r@gmail.com>
- st: Re: Graph interaction of two countinous variables
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: ipfweight command. Clarification of population margins
- From: Johanna Birnir <jkbirnir@umd.edu>
- Re: st: use xtnbreg, fe or xtpoisson, fe vce(r)?
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: analysing experimental panel data
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: use xtnbreg, fe or xtpoisson, fe vce(r)?
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: use xtnbreg, fe or xtpoisson, fe vce(r)?
- From: Muhammad Anees <anees@aneconomist.com>
- st: analysing experimental panel data
- From: Matthew Sunderland <matthews@unsw.edu.au>
- Re: st: adjusting hazard ratios in st cox using offset
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: adjusting hazard ratios in st cox using offset
- From: Steve Samuels <sjsamuels@gmail.com>
- Re: st: adjusting hazard ratios in st cox using offset
- From: Steve Samuels <sjsamuels@gmail.com>
- Fwd: st: Importing subset of a pipe delimited textfile - resolved (almost)
- From: Rob Shaw <rob.shaw.uk@gmail.com>
- Re: st: how to escalate coefficients using outreg2 or a similar program?
- From: John Luke Gallup <jlgallup@pdx.edu>
- st: use xtnbreg, fe or xtpoisson, fe vce(r)?
- From: "Vestal, Alex - COB" <Alex.Vestal@bus.oregonstate.edu>
- RE: st: Interpreting interactions
- From: "Fogel, Ariel" <AFogel@urban.org>
- st: RE: Interpreting interactions
- From: "Fogel, Ariel" <AFogel@urban.org>
- Re: st: Importing subset of a pipe delimited textfile
- From: Brendan Halpin <brendan.halpin@ul.ie>
- Re: st: Drawing sample using bootstrap
- From: Melaku Fekadu <melaku.fekadu@gmail.com>
- st: error message with pstest
- From: "Money, Roy" <roy.money@yale.edu>
- Re: st: Multivariate kernel regression
- From: Austin Nichols <austinnichols@gmail.com>
- st: Interpreting interactions
- From: Amal Khanolkar <Amal.Khanolkar@ki.se>
- Re: st: generating a continuous sequence
- From: Nick Cox <njcoxstata@gmail.com>
- st: generating a continuous sequence
- From: Jason Rosenberg <RSNJAS002@myuct.ac.za>
- Re: st: Multivariate kernel regression
- From: Shan Zhizhong <victor.shan@gmail.com>
- Re: st: Multivariate kernel regression
- From: Josh Hyman <hyman.josh@gmail.com>
- st: Suppressing some standard deviations in -esttab-
- From: Max.Livingston@ny.frb.org
- Re: st: mlabel on marginsplot?
- From: "Roger B. Newson" <r.newson@imperial.ac.uk>
- st: new command - stnet- for net survival
- From: Enzo Coviello <enzo.coviello@tin.it>
- Re: st: ipfweight command. Clarification of population margins
- From: Stas Kolenikov <skolenik@gmail.com>
- st: mlabel on marginsplot?
- From: "Ariel Linden, DrPH" <ariel.linden@gmail.com>
- st: how to escalate coefficients using outreg2 or a similar program?
- From: Benjamin Villena <b_villena@yahoo.com>
- Re: st: Importing subset of a pipe delimited textfile
- From: "Joseph Coveney" <jcoveney@bigplanet.com>
- Re: st: Assign observations to the right week number
- From: "Marco Müller" <endlevel@gmx.ch>
- Re: st: Importing subset of a pipe delimited textfile
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Importing subset of a pipe delimited textfile
- From: Rob Shaw <rob.shaw.uk@gmail.com>
- Re: st: Importing subset of a pipe delimited textfile
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Importing subset of a pipe delimited textfile
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Importing subset of a pipe delimited textfile
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Importing subset of a pipe delimited textfile
- From: Rob Shaw <rob.shaw.uk@gmail.com>
- Re: st: appending date variable in 2 datafiles
- From: Kamarul Imran <kim4597@gmail.com>
- Re: st: Importing subset of a pipe delimited textfile
- From: Daniel Feenberg <feenberg@nber.org>
- Re: st: appending date variable in 2 datafiles
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: replace part of observations in a string variable
- From: Kamarul Imran <kim4597@gmail.com>
- st: appending date variable in 2 datafiles
- From: Kamarul Imran <kim4597@gmail.com>
- Re: st: Assign observations to the right week number
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: replace part of observations in a string variable
- From: Kamarul Imran <kim4597@gmail.com>
- Re: st: replace part of observations in a string variable
- From: daniel klein <klein.daniel.81@googlemail.com>
- Re: st: replace part of observations in a string variable
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Assign observations to the right week number
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: replace part of observations in a string variable
- From: Muhammad Anees <anees@aneconomist.com>
- st: replace part of observations in a string variable
- From: Kamarul Imran <kim4597@gmail.com>
- st: Assign observations to the right week number
- From: "Marco Müller" <endlevel@gmx.ch>
- Re: st: Capturing unique actors meeting conditions by focal actor and year (excluding focal actor)
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Importing subset of a pipe delimited textfile
- From: Nick Cox <njcoxstata@gmail.com>
- st: ipfweight command. Clarification of population margins
- From: Johanna Birnir <jkbirnir@umd.edu>
- st: Importing subset of a pipe delimited textfile
- From: Rob Shaw <rob.shaw.uk@gmail.com>
- RE: st: Capturing unique actors meeting conditions by focal actor and year (excluding focal actor)
- From: Erik Aadland <erikaadland@hotmail.com>
- Re: st: Interpreting interactions
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Recode and Label problem
- From: daniel klein <klein.daniel.81@googlemail.com>
- Re: st: Recode and Label problem
- From: daniel klein <klein.daniel.81@googlemail.com>
- Re: st: Interpreting interactions
- From: Rieza Soelaeman <rsoelaeman@gmail.com>
- st: Recode and Label problem
- From: Rieza Soelaeman <rsoelaeman@gmail.com>
- Re: st: Recode and Label problem
- From: Prakash Singh <prakashbhu@gmail.com>
- Re: st: Recode and Label problem
- From: Prakash Singh <prakashbhu@gmail.com>
- st: Recode and Label problem
- From: malay biswas <stata.malay@gmail.com>
- Re: st: Abnormal logistic results
- From: Ras Dondo <ras.dondo@yahoo.com>
- st: Interpreting interactions
- From: Amal Khanolkar <Amal.Khanolkar@ki.se>
- Re: st: Success is sweet
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Success is sweet
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: Success is sweet
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Success is sweet
- From: Reg Jordan <drreg@earthlink.net>
- Re: st: Success is sweet
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: Success is sweet
- From: Fernando Rios Avila <f.rios.a@gmail.com>
- st: Success is sweet
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Drawing sample using bootstrap
- From: Fernando Rios Avila <f.rios.a@gmail.com>
- Re: st: Unable to use "replace" on specific values (but others work ok)
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Unable to use "replace" on specific values (but others work ok)
- From: Laura Gibbons <gibbonsl@u.washington.edu>
- st: Drawing sample using bootstrap
- From: Melaku Fekadu <melaku.fekadu@gmail.com>
- Re: st: label one variable using values from another variable when you have nonintegers
- From: Felipe Benguria <fb4k@virginia.edu>
- Re: st: Capturing unique actors meeting conditions by focal actor and year (excluding focal actor)
- From: Nick Cox <njcoxstata@gmail.com>
- RE: st: Capturing unique actors meeting conditions by focal actor and year (excluding focal actor)
- From: Erik Aadland <erikaadland@hotmail.com>
- Re: st: Capturing unique actors meeting conditions by focal actor and year (excluding focal actor)
- From: Nick Cox <njcoxstata@gmail.com>
- st: panel unitroot tests allowing for structural breaks
- From: andy pondorfer <andi.pondorfer@gmail.com>
- RE: st: Capturing unique actors meeting conditions by focal actor and year (excluding focal actor)
- From: Erik Aadland <erikaadland@hotmail.com>
- Re: st: Abnormal logistic results
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Capturing unique actors meeting conditions by focal actor and year (excluding focal actor)
- From: Nick Cox <njcoxstata@gmail.com>
- RE: st: Capturing unique actors meeting conditions by focal actor and year (excluding focal actor)
- From: Erik Aadland <erikaadland@hotmail.com>
- Re: st: Abnormal logistic results
- From: Ras Dondo <ras.dondo@yahoo.com>
- Re: st: Capturing unique actors meeting conditions by focal actor and year (excluding focal actor)
- From: Nick Cox <njcoxstata@gmail.com>
- st: Capturing unique actors meeting conditions by focal actor and year (excluding focal actor)
- From: Erik Aadland <erikaadland@hotmail.com>
- Re: st: Normally distributed error term & testing normality of residuals
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: adjusting hazard ratios in st cox using offset
- From: Will Schairer <wschairer@gmail.com>
- st: whether difference is significant
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: stcurve: why two different graphs?
- From: Steve Samuels <sjsamuels@gmail.com>
- Re: st: Unable to use "replace" on specific values (but others work ok)
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: to hijack the stata ml?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Unable to use "replace" on specific values (but others work ok)
- From: Anna Reimondos <areimondos@gmail.com>
- st: to hijack the stata ml?
- From: Sun Yutao <yutao.sun.statalist@outlook.com>
- Re: st: Unable to use "replace" on specific values (but others work ok)
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Unable to use "replace" on specific values (but others work ok)
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: Unable to use "replace" on specific values (but others work ok)
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Unable to use "replace" on specific values (but others work ok)
- From: Tim <lists@timbp.com>
- Re: st: Unable to use "replace" on specific values (but others work ok)
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Unable to use "replace" on specific values (but others work ok)
- From: daniel klein <klein.daniel.81@googlemail.com>
- Re: st: Working with really large Datasets
- From: Fernando Rios Avila <f.rios.a@gmail.com>
- st: Degrees of freedom in STPM2
- From: Adam Olszewski <adam.olszewski@gmail.com>
- st: Unable to use "replace" on specific values (but others work ok)
- From: Anna Reimondos <areimondos@gmail.com>
- Re: st: Working with really large Datasets
- From: Richard Williams <richardwilliams.ndu@gmail.com>
- Re: st: Working with really large Datasets
- From: "Justina Fischer" <JAVFischer@gmx.de>
- st: Working with really large Datasets
- From: Fernando Rios Avila <f.rios.a@gmail.com>
- Re: st: OLS and IV have opposite sign
- From: Shikha Sinha <shikha.sinha414@gmail.com>
- RE: st: OLS and IV have opposite sign
- From: Sun Yutao <yutao.sun.statalist@outlook.com>
- Re: st: OLS and IV have opposite sign
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: OLS and IV have opposite sign
- From: Austin Nichols <austinnichols@gmail.com>
- st: stcurve: why two different graphs?
- RE: st: OLS and IV have opposite sign
- From: "Millimet, Daniel" <millimet@mail.smu.edu>
- RE: st: OLS and IV have opposite sign
- From: Sun Yutao <yutao.sun.statalist@outlook.com>
- Re: st: OLS and IV have opposite sign
- From: Shikha Sinha <shikha.sinha414@gmail.com>
- st: RE: OLS and IV have opposite sign
- From: Sun Yutao <yutao.sun.statalist@outlook.com>
- Re: st: OLS and IV have opposite sign
- From: Austin Nichols <austinnichols@gmail.com>
- st: OLS and IV have opposite sign
- From: Shikha Sinha <shikha.sinha414@gmail.com>
- Re: st: Re-installing Stata
- From: "Shittu, Aminu" <ameen_vet@yahoo.com>
- Re: st: Normally distributed error term & testing normality of residuals
- From: "Seed, Paul" <paul.seed@kcl.ac.uk>
- Re: st: Conditional Counter
- From: Gonzalo DURAN SANHUEZA <giduran@puc.cl>
- Re: st: selection equation Heckman
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Esttab and "too many base levels specified"
- From: Richard Herron <richard.c.herron@gmail.com>
- RE: st: selection equation Heckman
- From: Jan Wynen <Jan.Wynen@kuleuven.be>
- Re: st: Conditional Counter
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- Re: st: Conditional Counter
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: selection equation Heckman
- From: Lars Folkestad <lfolkestad@health.sdu.dk>
- st: selection equation Heckman
- From: Jan Wynen <Jan.Wynen@kuleuven.be>
- Re: st: Re-installing Stata
- From: Muhammad Anees <anees@aneconomist.com>
- st: Conditional Counter
- From: Gonzalo DURAN SANHUEZA <giduran@puc.cl>
- Re: st: Re-installing Stata
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: Re-installing Stata
- From: Aaron Kirkman <ak1795mailserv@gmail.com>
- st: Re-installing Stata
- From: "Shittu, Aminu" <ameen_vet@yahoo.com>
- Re: st: whether difference is significant
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: gamma
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- st: whether difference is significant
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: Corrgram does not give the same result as coefficient of determination
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: whether difference is significant
- From: Richard Goldstein <richgold@ix.netcom.com>
- Re: st: whether difference is significant
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: whether difference is significant
- From: "Lynn Lee" <lynn09v@gmail.com>
- st: whether difference is significant
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: RE: st: Fixed effects - not quite invariant variables?
- From: "Justina Fischer" <JAVFischer@gmx.de>
- RE: st: Fixed effects - not quite invariant variables?
- From: <FERNANDO.MISTURA@oecd.org>
- st: Re: Tables in Tex
- From: "Bianca B." <bianca268@yahoo.com>
- Re: st: gamma
- From: David Hoaglin <dchoaglin@gmail.com>
- Re: st: gamma
- From: Maarten Buis <maartenlbuis@gmail.com>
- RE: st: gamma
- From: "MacLennan, Graeme" <g.maclennan@abdn.ac.uk>
- st: RE: Meta-Analysis using --metan-- how to ensure comparison to ES=1 not ES=0
- From: "Trelle Sven" <strelle@ctu.unibe.ch>
- RE: st: gamma
- From: Jason Rosenberg <RSNJAS002@myuct.ac.za>
- Re: st: Referring to coefficients after mlogit
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: loop
- From: - <dimpol7@googlemail.com>
- Re: st: Fixed effects - not quite invariant variables?
- From: Guo Xu <digitalepourpre@gmail.com>
- Re: st: whether difference is significant
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Referring to coefficients after mlogit
- From: "Korcan Kavusan" <k.kavusan@tilburguniversity.edu>
- st: whether difference is significant
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: Referring to coefficients after mlogit
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Fixed effects - not quite invariant variables?
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: Normally distributed error term & testing normality of
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Normally distributed error term & testing normality of residuals
- From: Maarten Buis <maartenlbuis@gmail.com>
- RE: st: Normally distributed error term & testing normality of
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- st: R: Abnormal logistic results
- From: "Carlo Lazzaro" <carlo.lazzaro@tiscalinet.it>
- st: Fixed effects - not quite invariant variables?
- From: fernando luiz mistura <f_mistura@hotmail.com>
- Re: RE: st: Normally distributed error term & testing normality of
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: Abnormal logistic results
- From: Maarten Buis <maartenlbuis@gmail.com>
- RE: st: Normally distributed error term & testing normality of
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- st: Meta-Analysis using --metan-- how to ensure comparison to ES=1 not ES=0
- From: Belinda Butcher <bbutcher@writesourcemedical.com.au>
- st: Abnormal logistic results
- From: Ras Dondo <ras.dondo@yahoo.com>
- Re: st: Normally distributed error term & testing normality of
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- st: Corrgram does not give the same result as coefficient of determination
- From: "Dr. Yu Chen" <profyuchen@gmail.com>
- st: predicted probabily at different values of time
- st: Referring to coefficients after mlogit
- From: "Korcan Kavusan" <k.kavusan@tilburguniversity.edu>
- Re: st: Esttab and "too many base levels specified"
- Re: st: Esttab and "too many base levels specified"
- From: Richard Herron <richard.c.herron@gmail.com>
- Re: st: Firm Fixed Effects and ANOVA
- Re: st: Esttab and "too many base levels specified"
- Re: st: Esttab and "too many base levels specified"
- From: Richard Herron <richard.c.herron@gmail.com>
- st: Esttab and "too many base levels specified"
- Re: st: Manual calculation of scale factors after tobit and/or truncreg [econometrics help]
- From: Arne Risa Hole <arnehole@gmail.com>
- RE: st: Normally distributed error term & testing normality of
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- Re: st: Normally distributed error term & testing normality of residuals
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- re: st: Normally distributed error term & testing normality of
- From: Christopher Baum <kit.baum@bc.edu>
- Re: st: Normally distributed error term & testing normality of residuals
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: Normally distributed error term & testing normality of residuals
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Normally distributed error term & testing normality of residuals
- From: Nick Cox <njcoxstata@gmail.com>
- RE: st: passing an equation list?
- From: Sun Yutao <yutao.sun.statalist@outlook.com>
- RE: st: Normally distributed error term & testing normality of residuals
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- RE: st: Normally distributed error term & testing normality of residuals
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- Re: st: Normally distributed error term & testing normality of residuals
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Normally distributed error term & testing normality of residuals
- From: "Justina Fischer" <JAVFischer@gmx.de>
- st: asclogit elasticity SE
- From: "Kohlhase, Janet E" <kohlhase@central.uh.edu>
- Re: st: Normally distributed error term & testing normality of residuals
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: log likelihood
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: log likelihood
- From: Nick Cox <njcoxstata@gmail.com>
- st: log likelihood
- From: Jan Svoboda <Johnysvo@seznam.cz>
- Re: st: passing an equation list?
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: passing an equation list?
- From: Sun Yutao <yutao.sun.statalist@outlook.com>
- RE: st: Normally distributed error term & testing normality of residuals
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- Re: st: Checking to see if the association between two variables is linear or otherwise
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: Normally distributed error term & testing normality of residuals
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: rescaling a variable by the maximum value question
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- RE: st: Normally distributed error term & testing normality of residuals
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- Re: st: Normally distributed error term & testing normality of residuals
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: Normally distributed error term & testing normality of residuals
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- RE: st: Normally distributed error term & testing normality of residuals
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- Re: st: rescaling a variable by the maximum value question
- From: Nick Cox <njcoxstata@gmail.com>
- Re: RE: st: Checking to see if the association between two variables is linear or otherwise
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: rescaling a variable by the maximum value question
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: rescaling a variable by the maximum value question
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Checking to see if the association between two variables is linear or otherwise
- From: William Buchanan <william@williambuchanan.net>
- RE: st: Normally distributed error term & testing normality of residuals
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- Re: RE: st: Checking to see if the association between two variables is linear or otherwise
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: Normally distributed error term & testing normality of residuals
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- RE: st: Normally distributed error term & testing normality of residuals
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- Re: st: rescaling a variable by the maximum value question
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: Normally distributed error term & testing normality of residuals
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Normally distributed error term & testing normality of residuals
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- RE: st: Normally distributed error term & testing normality of residuals
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- Re: st: Normally distributed error term & testing normality of residuals
- From: Nick Cox <njcoxstata@gmail.com>
- RE: st: Normally distributed error term & testing normality of residuals
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- Re: st: rescaling a variable by the maximum value question
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Normally distributed error term & testing normality of residuals
- From: Nick Cox <njcoxstata@gmail.com>
- st: Normally distributed error term & testing normality of residuals
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- Re: RE: st: Checking to see if the association between two variables is linear or otherwise
- From: Nick Cox <njcoxstata@gmail.com>
- st: Heteroscedasticity for Tobit
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- Re: st: rescaling a variable by the maximum value question
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: RE: How do I properly tell Stata this data is Panel Data?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: loop
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: rescaling a variable by the maximum value question
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: Checking to see if the association between two variables is linear or otherwise
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: RE: st: Checking to see if the association between two variables is linear or otherwise
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: RE: st: Checking to see if the association between two variables is linear or otherwise
- From: "Justina Fischer" <JAVFischer@gmx.de>
- st: rescaling a variable by the maximum value question
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: Checking to see if the association between two variables is linear or otherwise
- From: William Buchanan <william@williambuchanan.net>
- Re: RE: st: Checking to see if the association between two variables is linear or otherwise
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: RE: st: Checking to see if the association between two variables is linear or otherwise
- From: David Kantor <kantor.d@att.net>
- Re: st: RE: How do I properly tell Stata this data is Panel Data?
- From: Andrew Nicholson <andrew5@k-state.edu>
- Re: st: Checking to see if the association between two variables is linear or otherwise
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: RE: st: Checking to see if the association between two variables is linear or otherwise
- From: "Justina Fischer" <JAVFischer@gmx.de>
- RE: st: Checking to see if the association between two variables is linear or otherwise
- From: Amal Khanolkar <Amal.Khanolkar@ki.se>
- Re: st: RE: How do I properly tell Stata this data is Panel Data?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Checking to see if the association between two variables is linear or otherwise
- From: "Justina Fischer" <JAVFischer@gmx.de>
- st: RE: How do I properly tell Stata this data is Panel Data?
- From: Sun Yutao <yutao.sun@hotmail.com>
- st: How do I properly tell Stata this data is Panel Data?
- From: Andrew Nicholson <andrew5@k-state.edu>
- st: Checking to see if the association between two variables is linear or otherwise
- From: Amal Khanolkar <Amal.Khanolkar@ki.se>
- st: Time Series Fan Charts
- From: "Levin, David J." <dlevin@lmi.org>
- st: concentrated likelihood function?
- From: Sun Yutao <yutao.sun@hotmail.com>
- Re: st: Multivariate kernel regression
- From: Austin Nichols <austinnichols@gmail.com>
- st: Multivariate kernel regression
- From: Josh Hyman <hyman.josh@gmail.com>
- Re: st: intcens: how to estimate mean and variance after intcens
- From: Steve Samuels <sjsamuels@gmail.com>
- st: RE: Unique Clients with Multiple IDs that need to be integrated
- From: "Emily Putnam-Hornstein" <ehornste@usc.edu>
- st: New version of -parmest- on SSC
- From: "Roger B. Newson" <r.newson@imperial.ac.uk>
- Re: st: Manual calculation of scale factors after tobit and/or truncreg [econometrics help]
- From: Clara Mukuria <C.Mukuria@sheffield.ac.uk>
- RE: st: Looping a poisson regression analysis for levelsof a variable
- From: Tim Evans <Tim.Evans@wmciu.nhs.uk>
- st: A Heckman Model with Multi-Logit Selection Equation
- From: Yuval Arbel <yuval.arbel@gmail.com>
- Re: st: problem with -recode- inside an .ado file
- From: Dino Gibertoni <dino.gibertoni2@unibo.it>
- Re: st: encode command
- From: Ronnie Babigumira <rb.glists@gmail.com>
- st: encode command
- From: <Caterina.ASTARITA@ext.ec.europa.eu>
- st: problem with -recode- inside an .ado file
- From: Dino Gibertoni <dino.gibertoni2@unibo.it>
- Re: st: Manual calculation of scale factors after tobit and/or truncreg [econometrics help]
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Looping a poisson regression analysis for levelsof a variable
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Looping a poisson regression analysis for levelsof a variable
- From: daniel klein <klein.daniel.81@googlemail.com>
- Re: st: loop
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: loop
- From: Muhammad Anees <anees@aneconomist.com>
- Re: st: Manual calculation of scale factors after tobit and/or truncreg [econometrics help]
- From: Clara Mukuria <C.Mukuria@sheffield.ac.uk>
- st: loop
- From: - <dimpol7@googlemail.com>
- st: loop
- From: - <dimpol7@googlemail.com>
- st: Re:
- From: - <dimpol7@googlemail.com>
- st: Sums and means for each decile
- From: <S.Jenkins@lse.ac.uk>
- Re: st: Two dichotomous variables to One Categorical
- From: Nick Cox <njcoxstata@gmail.com>
- st: Looping a poisson regression analysis for levelsof a variable
- From: Tim Evans <Tim.Evans@wmciu.nhs.uk>
- Re: st: Two dichotomous variables to One Categorical
- From: Muhammad Anees <anees@aneconomist.com>
- Re: st: Two dichotomous variables to One Categorical
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: Two dichotomous variables to One Categorical
- From: malay biswas <stata.malay@gmail.com>
- Re: st: Demeaning TFP
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Manual calculation of scale factors after tobit and/or truncreg [econometrics help]
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: FW: st: SEM
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: RE: Unique Clients with Multiple IDs that need to be integrated
- From: Robert Picard <picard@netbox.com>
- FW: st: SEM
- From: "Tucker, Graeme (Health)" <Graeme.Tucker@health.sa.gov.au>
- Re: st: SEM
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- st: SEM
- From: "Tucker, Graeme (Health)" <Graeme.Tucker@health.sa.gov.au>
- st: RE: Unique Clients with Multiple IDs that need to be integrated
- From: "Sarah Edgington" <sedging@ucla.edu>
- Re: st: Firm Fixed Effects and ANOVA
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- st: Firm Fixed Effects and ANOVA
- st: areg for more several FEs?
- From: Guo Xu <digitalepourpre@gmail.com>
- Re: st: Unique Clients with Multiple IDs that need to be integrated
- From: "Justina Fischer" <JAVFischer@gmx.de>
- st: Unique Clients with Multiple IDs that need to be integrated
- From: "Emily Putnam-Hornstein" <eputnamhornstein@berkeley.edu>
- Re: st: Matching samples in Stata
- From: Paula Arce <paulaarce@rocketmail.com>
- Re: st: ordered logistic regression with endogenous variable
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: ordered logistic regression with endogenous variable
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: Matching samples in Stata
- From: David Kantor <kantor.d@att.net>
- Re: st: two selection equations followed by mlogit?
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: ordered logistic regression with endogenous variable
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: How to model data with cross-sectional dependent variable but panel explanatory variables
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: ordered logistic regression with endogenous variable
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- Re: st: ordered logistic regression with endogenous variable
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- Re: st: ordered logistic regression with endogenous variable
- From: Austin Nichols <austinnichols@gmail.com>
- st: Re: compute a variable with the same formula for each year
- From: "Joseph Coveney" <jcoveney@bigplanet.com>
- st: Re: Bar chart
- From: "Joseph Coveney" <jcoveney@bigplanet.com>
- st: Bar chart
- From: Yingge Lin <yingge.lin@gmail.com>
- st: compute a variable with the same formula for each year
- From: urbain thierry YOGO <yogout@gmail.com>
- Re: st: linesize with -sjlog-
- From: Partha Deb <partha.deb@hunter.cuny.edu>
- st: Manual calculation of scale factors after tobit and/or truncreg [econometrics help]
- From: Clara Mukuria <C.Mukuria@sheffield.ac.uk>
- Re: st: linesize with -sjlog-
- From: Nick Cox <njcoxstata@gmail.com>
- st: Addstat option with outreg2 invalid syntax
- From: Audrey N Straus <audreystraus@utexas.edu>
- Re: st: label one variable using values from another variable when you have nonintegers
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: ordered logistic regression with endogenous variable
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: command for fractional logit model
- From: Sara Borelli <saraborelli77@gmail.com>
- st: linesize with -sjlog-
- From: Partha Deb <partha.deb@hunter.cuny.edu>
- st: label one variable using values from another variable when you have nonintegers
- From: Felipe Benguria <fb4k@virginia.edu>
- Re: st: ordered logistic regression with endogenous variable
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- Re: st: Sums and means for each decile
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Matching samples in Stata
- From: Paula Arce <paulaarce@rocketmail.com>
- st: two selection equations followed by mlogit?
- From: Raluca Prelipceanu <raluca.prelipceanu@gmail.com>
- Re: st: ordered logistic regression with endogenous variable
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: ordered logistic regression with endogenous variable
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- st: intcens: how to estimate mean and variance after intcens
- From: Yoann Madec <yoann.madec@pasteur.fr>
- Re: st: Sums and means for each decile
- From: "Pablo Bonilla" <pablo.bonilla1234@gmail.com>
- RE: st: Sums and means for each decile
- From: Charles Vellutini <charles.vellutini@ecopa.com>
- Re: st: Stata agent string for net install
- From: Brendan Halpin <brendan.halpin@ul.ie>
- Re: st: Stata agent string for net install
- From: Muhammad Anees <anees@aneconomist.com>
- Re: st: Sums and means for each decile
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Sums and means for each decile
- From: Nick Cox <njcoxstata@gmail.com>
- RE: st: Sums and means for each decile
- From: Charles Vellutini <charles.vellutini@ecopa.com>
- Re:st: Stata agent string for net install
- From: ariley@stata.com (Alan Riley)
- Re: st: Sums and means for each decile
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: ordered logistic regression with endogenous variable
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- Re: st: ordered logistic regression with endogenous variable
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- st: How to model data with cross-sectional dependent variable but panel explanatory variables
- From: Chao Wang <chao.wang@obs-gyn.ox.ac.uk>
- st: Sums and means for each decile
- From: Charles Vellutini <charles.vellutini@ecopa.com>
- Re: st: ordered logistic regression with endogenous variable
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: break string into multiple variables: correction
- From: Sophie Moullin <sophiemoullin@gmail.com>
- Re: st: ordered logistic regression with endogenous variable
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- st: New versions of -qqvalue- and -smileplot- on SSC
- From: "Roger B. Newson" <r.newson@imperial.ac.uk>
- Re: st: gamma
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: break string into multiple variables: correction
- From: Steve Samuels <sjsamuels@gmail.com>
- Re: st: ordered logistic regression with endogenous variable
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: ordered logistic regression with endogenous variable
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: ordered logistic regression with endogenous variable
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: gamma
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: encode command
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: gamma
- From: Nick Cox <njcoxstata@gmail.com>
- st: encode command
- From: <Caterina.ASTARITA@ext.ec.europa.eu>
- RE: st: gamma
- From: Jason Rosenberg <RSNJAS002@myuct.ac.za>
- Re: st: ordered logistic regression with endogenous variable
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- Re: st: gamma
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: ordered logistic regression with endogenous variable
- From: "Justina Fischer" <JAVFischer@gmx.de>
- st: gamma
- From: Jason Rosenberg <RSNJAS002@myuct.ac.za>
- Re: st: break string into multiple variables
- From: Steve Nakoneshny <scnakone@ucalgary.ca>
- st: ordered logistic regression with endogenous variable
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- Re: st: String variable behaving badly
- From: Anna Reimondos <areimondos@gmail.com>
- Re: st: String variable behaving badly
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: growth rate
- From: Christopher Baum <kit.baum@bc.edu>
- st: String variable behaving oddly
- From: Anna Reimondos <areimondos@gmail.com>
- st: String variable behaving badly
- From: Anna Reimondos <areimondos@gmail.com>
- Re: st: Keep/Drop Observations for Top/Bottom X%
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: Keep/Drop Observations for Top/Bottom X%
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Keep/Drop Observations for Top/Bottom X%
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Keep/Drop Observations for Top/Bottom X%
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: Keep/Drop Observations for Top/Bottom X%
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Keep/Drop Observations for Top/Bottom X%
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Keep/Drop Observations for Top/Bottom X%
- From: Lisa Wang <lhwang0925@gmail.com>
- Re: st: Keep/Drop Observations for Top/Bottom X%
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: Keep/Drop Observations for Top/Bottom X%
- From: Nick Cox <njcoxstata@gmail.com>
- st: stcurve: why two different graphs?
- Re: st: Keep/Drop Observations for Top/Bottom X%
- From: "Justina Fischer" <JAVFischer@gmx.de>
- st: Keep/Drop Observations for Top/Bottom X%
- From: Lisa Wang <lhwang0925@gmail.com>
- Re: st: break string into multiple variables
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Stata agent string for net install
- From: Brendan Halpin <brendan.halpin@ul.ie>
- st: growth rate
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: Stata agent string for net install
- From: Muhammad Anees <anees@aneconomist.com>
- Re: st: break string into multiple variables
- From: Steve Samuels <sjsamuels@gmail.com>
- Re: st: break string into multiple variables
- From: Steve Nakoneshny <scnakone@ucalgary.ca>
- Re: st: break string into multiple variables
- From: Nick Cox <njcoxstata@gmail.com>
- st: RE: break string into multiple variables
- From: "Sarah Edgington" <sedging@ucla.edu>
- st: break string into multiple variables
- From: Sophie Moullin <sophiemoullin@gmail.com>
- st: Re: Stata agent string for net install
- From: Brendan Halpin <brendan.halpin@ul.ie>
- Re: st: unrar - unzipfile
- From: Pablo Bonilla <pablo.bonilla1234@gmail.com>
- Re: st: command for fractional logit model
- From: "Dimitriy V. Masterov" <dvmaster@gmail.com>
- st: command for fractional logit model
- From: Sara Borelli <saraborelli77@gmail.com>
- Re: st: Demeaning TFP
- From: SAM MCCAW <sam2stata@gmail.com>
- st: Demeaning TFP
- From: SAM MCCAW <sam2stata@gmail.com>
- st: Stata agent string for net install
- From: Brendan Halpin <brendan.halpin@ul.ie>
- Re: st: How to use an independent grid to perform calculations for each observations
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: unrar - unzipfile
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: unrar - unzipfile
- From: Pablo Bonilla <pablo.bonilla1234@gmail.com>
- st: How to use an independent grid to perform calculations for each observations
- From: Daniel Almar de Sneijder <dasneijder@gmail.com>
- Re: st: unrar - unzipfile
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: unrar - unzipfile
- From: Aaron Kirkman <ak1795mailserv@gmail.com>
- Re: st: unrar - unzipfile
- From: Aaron Kirkman <ak1795mailserv@gmail.com>
- st: unrar - unzipfile
- From: Pablo Bonilla <pablo.bonilla1234@gmail.com>
- Re: st: adding p value of probexog chi2 test in esttad after probit
- From: Prakash Singh <prakashbhu@gmail.com>
- Re: re: Re: st: growth rate
- From: "Justina Fischer" <JAVFischer@gmx.de>
- re: Re: st: growth rate
- From: Christopher Baum <kit.baum@bc.edu>
- Re: st: Question About Using Permute Command
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: adding p value of probexog chi2 test in esttad after probit
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: "xtdpdsys" command and "collapse" option
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: RE: growth rate
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: RE: growth rate
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: adding p value of probexog chi2 test in esttad after probit
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: RE: growth rate
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: RE: growth rate
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: adding p value of probexog chi2 test in esttad after probit
- From: Prakash Singh <prakashbhu@gmail.com>
- re: st: "xtdpdsys" command and "collapse" option
- st: Question About Using Permute Command
- From: Michael Horowitz <horom@sas.upenn.edu>
- Re: st: RE: growth rate
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: RE: growth rate
- From: "Justina Fischer" <JAVFischer@gmx.de>
- Re: st: growth rate
- From: Nick Cox <njcoxstata@gmail.com>
- st: RE: growth rate
- From: "Swanquist, Quinn Thomas" <qswanqui@utk.edu>
- st: growth rate
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: growth rate
- From: Nick Cox <njcoxstata@gmail.com>
- st: growth rate
- From: "Lynn Lee" <lynn09v@gmail.com>
- st: growth rate
- From: "Lynn Lee" <lynn09v@gmail.com>
- st: xml_tab options
- From: Carlotta Schuster <schuster.carlotta@gmail.com>
- re: st: "xtdpdsys" command and "collapse" option
- From: Christopher Baum <kit.baum@bc.edu>
- Re: st: adding p value of probexog chi2 test in esttad after probit
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: How to identify a string as a variable?
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: adding p value of probexog chi2 test in esttad after probit
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: adding p value of probexog chi2 test in esttad after probit
- From: Prakash Singh <prakashbhu@gmail.com>
- Re: st: Varying results for levpet
- From: SAM McCaw <sam2stata@gmail.com>
- Re: st: How to identify a string as a variable?
- From: Nobuaki Michihata <gha10771@gmail.com>
- RE: st: How to identify a string as a variable?
- From: "kantor.d@att.net" <kantor.d@att.net>
- RE: st: Testing for significant differences between groups after running a random-effects regression
- From: Michael Housman <mhousman@evolvondemand.com>
- st: How to identify a string as a variable?
- From: Nobuaki Michihata <gha10771@gmail.com>
- st: Alternatives to clogit?
- From: Wameq Raza <wameq.r@gmail.com>
- Re: st: factor analysis - calculating Crohnbach's alpha
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- RE: st: keeping cointegrating parameters
- From: Jeremy Kronick <jeremykronick@hotmail.com>
- Re: st: factor analysis - calculating Crohnbach's alpha
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- RE: st: factor analysis - calculating Crohnbach's alpha
- From: Kerry MacQuarrie <Kerry.MacQuarrie@icfi.com>
- Re: st: factor analysis - calculating Crohnbach's alpha
- From: Nick Cox <njcoxstata@gmail.com>
- st: factor analysis - calculating Crohnbach's alpha
- From: Kerry MacQuarrie <Kerry.MacQuarrie@icfi.com>
- Re: st: levpet - loops and varying results
- From: "Brian P. Poi" <bpoi@stata.com>
- Re: st: Testing for significant differences between groups after running a random-effects regression
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- Re: st: levpet - loops and varying results
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: levpet - loops and varying results
- From: Nick Cox <njcoxstata@gmail.com>
- st: levpet - loops and varying results
- From: SAM MCCAW <sam2stata@gmail.com>
- st: Testing for significant differences between groups after running a random-effects regression
- From: Michael Housman <mhousman@evolvondemand.com>
- Re: st: computing elasticities after using lpoly
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: computing elasticities after using lpoly
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: Three-way (or more) histograms in Stata
- From: Austin Nichols <austinnichols@gmail.com>
- RE: st: Three-way (or more) histograms in Stata
- From: Tim Evans <Tim.Evans@wmciu.nhs.uk>
- Re: st: Three-way (or more) histograms in Stata
- From: William Buchanan <william@williambuchanan.net>
- Re: st: Three-way (or more) histograms in Stata
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- Re: st: Three-way (or more) histograms in Stata
- From: Nick Cox <njcoxstata@gmail.com>
- st: Three-way (or more) histograms in Stata
- From: Tim Evans <Tim.Evans@wmciu.nhs.uk>
- st: "xtdpdsys" command and "collapse" option
- Re: st: Legal Download of Stata with licence
- From: Nick Cox <njcoxstata@gmail.com>
- st: Legal Download of Stata with licence
- From: "Meulemann Max" <mmeulemann@ethz.ch>
- Re: st: Column vector into variable, accounting for -marksample-
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Column vector into variable, accounting for -marksample-
- From: "Lacy,Michael" <Michael.Lacy@colostate.edu>
- Re: st: datetime different in Stata 12?
- From: Skipper Seabold <jsseabold@gmail.com>
- st: Constructing Portfolios for Time-Series Regression
- From: "Tim Streibel" <Tim.Streibel@gmx.de>
- Re: Re: st: Creating variables from a matched pair
- From: David Kantor <kantor.d@att.net>
- st: shell command not working with wmpstata
- From: Pradipto Banerjee <pradipto.banerjee@adainvestments.com>
- st: statweave
- From: "Airey, David C" <david.airey@vanderbilt.edu>
- RE: st: keeping cointegrating parameters
- From: Jeremy Kronick <jeremykronick@hotmail.com>
- re: RE: st: keeping cointegrating parameters
- From: Christopher Baum <kit.baum@bc.edu>
- RE: st: keeping cointegrating parameters
- From: Jeremy Kronick <jeremykronick@hotmail.com>
- Re: Re: st: Creating variables from a matched pair
- From: Nick Cox <njcoxstata@gmail.com>
- Re: Re: st: Creating variables from a matched pair
- From: "Kopsic, Jessica" <kopsicj@ccbh.com>
- Re: st: Creating variables from a matched pair
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Creating variables from a matched pair
- From: David Kantor <kantor.d@att.net>
- st: Creating variables from a matched pair
- From: "Kopsic, Jessica" <kopsicj@ccbh.com>
- st: shell command doesn't wait
- From: Pradipto Banerjee <pradipto.banerjee@adainvestments.com>
- Re: st: keeping cointegrating parameters
- From: Christopher Baum <kit.baum@bc.edu>
- st: Heteroskedasticity for Tobit
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- st: keeping cointegrating parameters
- From: Jeremy Kronick <jeremykronick@hotmail.com>
- Re: st: datetime different in Stata 12?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: datetime different in Stata 12?
- From: Skipper Seabold <jsseabold@gmail.com>
- st: datetime different in Stata 12?
- From: Skipper Seabold <jsseabold@gmail.com>
- Re: st: dates question
- From: Michael Eisenberg <meisenberg713@gmail.com>
- RE: st: reclink -- type mismatch
- From: David Sikkink <David.Sikkink.1@nd.edu>
- Re: R: st: Is there a similar command as roccomp for comparing two kaplan-meier curves?
- From: Steve Samuels <sjsamuels@gmail.com>
- Re: st: Varying results for levpet
- From: "Brian P. Poi" <bpoi@stata.com>
- Re: R: st: Is there a similar command as roccomp for comparing two kaplan-meier curves?
- From: "Roger B. Newson" <r.newson@imperial.ac.uk>
- Re: st: Question about average marginal effects for logit models with dummy variables
- From: Richard Williams <richardwilliams.ndu@gmail.com>
- st: interpretation of fixed effects model with time-variant covariates and interaction term
- From: Ferdinand Eibl <ferdinand.eibl@politics.ox.ac.uk>
- Re: st: Question about average marginal effects for logit models with dummy variables
- From: Richard Williams <richardwilliams.ndu@gmail.com>
- Re: st: Question about average marginal effects for logit models with dummy variables
- From: Tirthankar Chakravarty <tirthankar.lists@gmail.com>
- Re: st: mle estimation
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: mle estimation
- From: Jason Rosenberg <RSNJAS002@myuct.ac.za>
- Re: st: twoway line
- From: "Roger B. Newson" <r.newson@imperial.ac.uk>
- st: Question about average marginal effects for logit models with dummy variables
- From: Bob Reed <bob.reed@canterbury.ac.nz>
- Re: st: dates question
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: dates question
- From: Chamara Anuranga <kcanuranga@gmail.com>
- R: st: Is there a similar command as roccomp for comparing two kaplan-meier curves?
- From: "Carlo Lazzaro" <carlo.lazzaro@tiscalinet.it>
- st: dates question
- From: Michael Eisenberg <meisenberg713@gmail.com>
- RE: st: Is there a similar command as roccomp for comparing two kaplan-meier curves?
- From: <A.J.M.de_Craen@lumc.nl>
- Re: st: How to estimate standard error of panel variant coefficient
- From: Tirthankar Chakravarty <tirthankar.lists@gmail.com>
- Re: st: How to estimate standard error of panel variant coefficient
- From: Tirthankar Chakravarty <tirthankar.lists@gmail.com>
- st: How to estimate standard error of panel variant coefficient
- From: Ram Acharya <acharya.ramc@gmail.com>
- st: twoway line
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: Is there a similar command as roccomp for comparing two kaplan-meier curves?
- From: Steve Samuels <sjsamuels@gmail.com>
- Re: st: Column vector into variable, accounting for -marksample-
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: reclink -- type mismatch
- From: Michael Blasnik <michael.blasnik@gmail.com>
- st: Column vector into variable, accounting for -marksample-
- From: "Lacy,Michael" <Michael.Lacy@colostate.edu>
- st: Is there a similar command as roccomp for comparing two kaplan-meier curves?
- From: <A.J.M.de_Craen@lumc.nl>
- re: st: twoway line
- From: Christopher Baum <kit.baum@bc.edu>
- st: SSC Activity, Sep 2012
- From: Christopher Baum <kit.baum@bc.edu>
- st: twoway line
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: twoway line
- From: Nick Cox <njcoxstata@gmail.com>
- RE: st: twoway line
- From: "Lynn Lee" <lynn09v@gmail.com>
- st: twoway line
- From: "Lynn Lee" <lynn09v@gmail.com>
- st: twoway line
- From: "Lynn Lee" <lynn09v@gmail.com>
- st: comparing coefficients after treatreg
- From: Agnieszka Kanas <a.kanas@maw.ru.nl>
- Re: st: twoway line
- From: Nick Cox <njcoxstata@gmail.com>
- re: st: twoway line
- From: Christopher Baum <kit.baum@bc.edu>
- RE: st: twoway line
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: twoway line
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Formula/algorithm Stata uses to calculate default axis ranges and tick marks?
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: twoway line
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Marginal Effects: CLogit
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: computing elasticities after using lpoly
- From: Arka Roy Chaudhuri <gabuisi@gmail.com>
- st: twoway line
- From: "Lynn Lee" <lynn09v@gmail.com>
- Re: st: Weighted proportion
- From: Steve Samuels <sjsamuels@gmail.com>
- st: reclink -- type mismatch
- From: David Sikkink <David.Sikkink.1@nd.edu>
- Re: st: Formula/algorithm Stata uses to calculate default axis ranges and tick marks?
- From: "Roger B. Newson" <r.newson@imperial.ac.uk>
- Re: st: Marginal Effects: CLogit
- From: Wameq Raza <wameq.r@gmail.com>
- Re: st: Local Macros Containing Strings and Spaces
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Formula/algorithm Stata uses to calculate default axis ranges and tick marks?
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Local Macros Containing Strings and Spaces
- From: Nick Cox <njcoxstata@gmail.com>
- st: Doubleb command for Double Bounded Dichotomous Choice data from CV survey
- From: Stephanie Stefanski <stephanie.stefanski@gmail.com>
- st: Local Macros Containing Strings and Spaces
- From: Erika Kociolek <ekociole@gmail.com>
- st: Formula/algorithm Stata uses to calculate default axis ranges and tick marks?
- From: Michael Stepner <michaelstepner@gmail.com>
- st: gllasim / M_nresp not found
- From: Volker Lang <v.lang@uni-tuebingen.de>
- Re: st: Marginal Effects: CLogit
- From: Nick Cox <njcoxstata@gmail.com>
- st: Marginal Effects: CLogit
- From: Wameq Raza <wameq.r@gmail.com>
- st: Plotting CIs for lpolyci
- From: Amy Hsin <hsin.amy@gmail.com>
- Re: st: computing elasticities after using lpoly
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: xtmelogit: comparing models
- From: Luca Campanelli <l.campanelli@yahoo.it>
- Re: st: computing elasticities after using lpoly
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: computing elasticities after using lpoly
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: computing elasticities after using lpoly
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: computing elasticities after using lpoly
- From: Arka Roy Chaudhuri <gabuisi@gmail.com>
- Re: st: computing elasticities after using lpoly
- From: Nick Cox <njcoxstata@gmail.com>
- st: computing elasticities after using lpoly
- From: Arka Roy Chaudhuri <gabuisi@gmail.com>
- st: Re: Mixed models for repeated measures
- From: "Joseph Coveney" <jcoveney@bigplanet.com>
- Re: st: Mixed models for repeated measures
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- st: Re: how to convert long data into set of ties
- From: Caleb Southworth <caleb.southworth@gmail.com>
- Re: st: how to make list of network ties from long data
- From: Brendan Halpin <brendan.halpin@ul.ie>
- st: how to make list of network ties from long data
- From: Caleb Southworth <caleb.southworth@gmail.com>
- Re: st: Mixed models for repeated measures
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- st: Mixed models for repeated measures
- From: Avi Zakai <aviz@trdf.technion.ac.il>
- st: Varying results for levpet
- From: SAM MCCAW <sam2stata@gmail.com>
- st: RE: RE: Using the predictnl command following a model containing restricted cubic splines and time-dependent effects
- From: "Turnbull, Alison E." <aturnbul@jhsph.edu>
- Re: st: xtmelogit: comparing models
- From: Stas Kolenikov <skolenik@gmail.com>
- Re: st: Merging Do-Files
- From: SAM MCCAW <sam2stata@gmail.com>
- Re: st: Merging Do-Files
- From: SAM MCCAW <sam2stata@gmail.com>
- st: Stata 12 Memory
- From: Matthew Weaver <weavermd@upmc.edu>
- RE: st: Re: st: Re: st: Re: st: Re: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- RE: st: Re: st: Re: st: Re: st: Re: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- st: Re: st: Re: st: Re: st: Re: st: Re: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: re: non-inferiority trials
- From: "Niemierko, Andrzej" <ANIEMIERKO@PARTNERS.ORG>
- st: Re: st: Re: st: Re: st: Re: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: Re: st: Re: st: Re: st: Re: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: xtmelogit: comparing models
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- Re: st: Unable to clear "invalid syntax r(197);" error in user-written .ado file
- From: Nick Cox <njcoxstata@gmail.com>
- RE: st: Re: st: Re: st: Re: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- st: re: non-inferiority trials
- From: Philip Jones <pjones.statalist@gmail.com>
- Re: st: Merging Do-Files
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Merging Do-Files
- From: "Justina Fischer" <JAVFischer@gmx.de>
- st: Merging Do-Files
- From: SAM MCCAW <sam2stata@gmail.com>
- st: xtmelogit: comparing models
- From: Luca Campanelli <l.campanelli@yahoo.it>
- re: st: Novice Question: Please help: Propensity Score Matching
- From: "Weichle, Thomas" <Thomas.Weichle@va.gov>
- st: Re: st: Re: st: Re: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: Re: st: Re: st: Re: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Weighted proportion
- From: Daniel Almar de Sneijder <dasneijder@gmail.com>
- re: st: Novice Question: Please help: Propensity Score Matching
- From: "Ariel Linden, DrPH" <ariel.linden@gmail.com>
- RE: st: Re: st: Re: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- Re: st: Unable to clear "invalid syntax r(197);" error in user-written .ado file
- From: Richard Herron <richard.c.herron@gmail.com>
- Re: st: marginsplot
- From: Melvyn Weeks <mw217@cam.ac.uk>
- st: Re: st: Re: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Problem with looping when executing command
- From: Maarten Buis <maartenlbuis@gmail.com>
- RE: st: Problem with looping when executing command
- From: "Kim, Isok" <isokkim@buffalo.edu>
- RE: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- RE: st: Re: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- st: pediatric blood pressure to z-scores?
- From: Billy White <billy.white@ucl.ac.uk>
- Re: st: Re: Spanish characters from windows to mac
- From: Ronan Conroy <rconroy@rcsi.ie>
- Re: st: Unable to clear "invalid syntax r(197);" error in user-written .ado file
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Weighted proportion
- From: Yuval Arbel <yuval.arbel@gmail.com>
- Re: st: Problem with looping when executing command
- From: Maarten Buis <maartenlbuis@gmail.com>
- RE: st: Mixed continuous and interval censored time-to-event analysis
- From: "MacLennan, Graeme" <g.maclennan@abdn.ac.uk>
- st: Re: st: RE: Re: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: Re: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Maarten Buis <maartenlbuis@gmail.com>
- RE: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- st: RE: Re: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: "Millimet, Daniel" <millimet@mail.smu.edu>
- Re: st: Re: Unable to clear "invalid syntax r(197);" error in user-written .ado file
- From: Richard Herron <richard.c.herron@gmail.com>
- st: Re: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- st: Re: Unable to clear "invalid syntax r(197);" error in user-written .ado file
- From: "Joseph Coveney" <jcoveney@bigplanet.com>
- st: Unable to clear "invalid syntax r(197);" error in user-written .ado file
- From: Richard Herron <richard.c.herron@gmail.com>
- Re: st: Weighted proportion
- From: David Kantor <kantor.d@att.net>
- RE: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: "Millimet, Daniel" <millimet@mail.smu.edu>
- st: Problem with looping when executing command
- From: "Kim, Isok" <isokkim@buffalo.edu>
- Re: st: Weighted proportion
- From: Steve Samuels <sjsamuels@gmail.com>
- Re: st: Weighted proportion
- From: Steve Samuels <sjsamuels@gmail.com>
- Re: st: Weighted proportion
- From: Yuval Arbel <yuval.arbel@gmail.com>
- Re: st: Weighted proportion
- From: Yuval Arbel <yuval.arbel@gmail.com>
- Re: st: Weighted proportion
- From: Daniel Almar de Sneijder <dasneijder@gmail.com>
- RE: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- RE: st: Weighted proportion
- From: "kantor.d@att.net" <kantor.d@att.net>
- st: RE: Re: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: "Millimet, Daniel" <millimet@mail.smu.edu>
- RE: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: "Millimet, Daniel" <millimet@mail.smu.edu>
- st: Re: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- RE: st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- Re: st: Problem with setting the right reference category when using mlogit
- From: Richard Williams <richardwilliams.ndu@gmail.com>
- st: Re: st: Re: st: RE: Truncated sample or Heckman selection
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- RE: st: Re: st: RE: Truncated sample or Heckman selection
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- st: Problem with setting the right reference category when using mlogit
- From: Amal Khanolkar <Amal.Khanolkar@ki.se>
- RE: st: Re: st: RE: Truncated sample or Heckman selection
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- st: Weighted proportion
- From: Daniel Almar de Sneijder <dasneijder@gmail.com>
- Re: st: Mixed continuous and interval censored time-to-event analysis
- From: Steve Samuels <sjsamuels@gmail.com>
- st: Re: st: RE: Truncated sample or Heckman selection
- From: Nick Cox <njcoxstata@gmail.com>
- st: Re: st: Re: st: Truncated sample or Heckman selection
- From: Nick Cox <njcoxstata@gmail.com>
- RE: st: Re: st: Truncated sample or Heckman selection
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- RE: st: Re: st: Truncated sample or Heckman selection
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- st: RE: Truncated sample or Heckman selection
- From: "Millimet, Daniel" <millimet@mail.smu.edu>
- st: Re: st: Truncated sample or Heckman selection
- From: Nick Cox <njcoxstata@gmail.com>
- st: Truncated sample or Heckman selection
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- Re: st: Reduced Correlation Matrix
- From: David Hoaglin <dchoaglin@gmail.com>
- Re: st: Combination of a multinomial logit model and a logit model
- From: Saki Tapsell <sakiuchiyama@gmail.com>
- st: spmap
- From: Chiara Mussida <cmussida@gmail.com>
- re: Re: Re: st: Pretreatment pair matching
- From: "Ariel Linden, DrPH" <ariel.linden@gmail.com>
- re: Re: Re: st: Matching samples in Stata
- From: "Ariel Linden, DrPH" <ariel.linden@gmail.com>
- st: non-inferiority trials
- From: "Niemierko, Andrzej" <ANIEMIERKO@PARTNERS.ORG>
- Re: st: Heckman
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: FW: comparing coefficients between 2 models with suest and pweight
- From: Thorhildur Olafsdottir <thorhild@hotmail.com>
- st: Heckman
- From: Jan Wynen <Jan.Wynen@kuleuven.be>
- st: Novice Question: Please help: Propensity Score Matching
- From: malay biswas <stata.malay@gmail.com>
- Re: st: Reduced Correlation Matrix
- From: Nick Cox <njcoxstata@gmail.com>
- st: Reduced Correlation Matrix
- From: "Meulemann Max" <mmeulemann@ethz.ch>
- st: Statalist advice: a summary
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: lock variable in model so that swaic cannot remove it
- From: Nick Cox <njcoxstata@gmail.com>
- st: Heckman procedure
- From: Jan Wynen <Jan.Wynen@kuleuven.be>
- Re: st: Fwd: Creating date variables using loops
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Fwd: Creating date variables using loops
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: Fwd: Creating date variables using loops
- From: Lars Folkestad <lfolkestad@health.sdu.dk>
- Re: st: Outreg for asclogit
- From: Wameq Raza <wameq.r@gmail.com>
- Re: st: Outreg for asclogit
- From: John Luke Gallup <jlgallup@pdx.edu>
- Re: st: Outreg for asclogit
- From: John Luke Gallup <jlgallup@pdx.edu>
- [no subject]
- RE: st: lock variable in model so that swaic cannot remove it
- From: Neophytos Stylianou <neophytos.stylianou@postgrad.manchester.ac.uk>
- [no subject]
- Re: st: lock variable in model so that swaic cannot remove it
- From: Nick Cox <njcoxstata@gmail.com>
- st: RE: Using the predictnl command following a model containing restricted cubic splines and time-dependent effects
- From: "Lambert, Paul C. (Dr.)" <pl4@leicester.ac.uk>
- st: lock variable in model so that swaic cannot remove it
- From: Neophytos Stylianou <neophytos.stylianou@postgrad.manchester.ac.uk>
- Re: st: local bootstrapping
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: Draw a random sample of my data...
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Combination of a multinomial logit model and a logit model
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- st: Using the predictnl command following a model containing restricted cubic splines and time-dependent effects
- From: "Turnbull, Alison E." <aturnbul@jhsph.edu>
- Re: st: Draw a random sample of my data...
- Re: st: Observations in Sequence analysis
- From: Brendan Halpin <brendan.halpin@ul.ie>
- Re: st: ivpois- received a coefficientfor for var. that wasn't specified
- From: Austin Nichols <austinnichols@gmail.com>
- st: Clustering variables instead of cases
- From: Alexey Shpenev <shpenevstatalist@gmail.com>
- RE: st: Matching samples in Stata
- From: "kantor.d@att.net" <kantor.d@att.net>
- Re: st: ivpois- received a coefficientfor for var. that wasn't specified
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- st: local bootstrapping
- From: Benjamin Villena <b_villena@yahoo.com>
- Re: st: ivpois- received a coefficientfor for var. that wasn't specified
- From: Austin Nichols <austinnichols@gmail.com>
- Re: st: Matching samples in Stata
- From: Paula Arce <paulaarce@rocketmail.com>
- Re: st: psmatch2 - exact matching with mahalanobis metric
- From: David Kantor <kantor.d@att.net>
- st: is merge old version faster?
- From: Enzo Coviello <enzo.coviello@tin.it>
- Re: st: Matching samples in Stata
- From: David Kantor <kantor.d@att.net>
- Re: st: eststo and factor variables
- From: Bert Lloyd <bert.lloyd.89@gmail.com>
- re: st: psmatch2 - exact matching with mahalanobis metric
- From: "Ariel Linden, DrPH" <ariel.linden@gmail.com>
- st: Mixed continuous and interval censored time-to-event analysis
- From: "MacLennan, Graeme" <g.maclennan@abdn.ac.uk>
- st: reclink error )
- From: David Sikkink <David.Sikkink.1@nd.edu>
- Re: st: eststo and factor variables
- Re: st: estout stats plus label plus format
- From: Johan Hellström <johan.hellstrom@pol.umu.se>
- Re: st: eststo and factor variables
- From: Bert Lloyd <bert.lloyd.89@gmail.com>
- Re: st: Conversion from string to numeric with imported excel document
- From: Ryan Stevens <stevrl7@gmail.com>
- Re: st: problem with ineqdeco & remote access
- From: simone scarpa <scarpa.simone@gmail.com>
- st: ivpois- received a coefficientfor for var. that wasn't specified
- From: "Anat (Manes) Tchetchik" <anatmanes@gmail.com>
- Re: st: Comparing overlapping groups
- From: Fred Wolfe <fwolfe@arthritis-research.org>
- st: estout stats plus label plus format
- From: "Fabian Schönenberger" <sch.f@gmx.ch>
- Re: Re: st: Pretreatment pair matching
- From: Wojciech Hardy <whardygildia@gmail.com>
- Re: st: Conversion from string to numeric with imported excel document
- From: Nick Cox <njcoxstata@gmail.com>
- Re: Re: st: Matching samples in Stata
- From: Paula Arce <paulaarce@rocketmail.com>
- Re: st: Matching samples in Stata
- From: Paula Arce <paulaarce@rocketmail.com>
- st: Twoway graph with hazard rate on y-axis and ordinal co-variable of choice on x-axis
- From: Hans Lundin <hans.cefam@gmail.com>
- st: Conversion from string to numeric with imported excel document
- From: Hans Lundin <hans.cefam@gmail.com>
- Re: st: marginsplot
- From: Tirthankar Chakravarty <tirthankar.lists@gmail.com>
- st: New package -gsgroup- on SSC
- From: "Roger B. Newson" <r.newson@imperial.ac.uk>
- Re: st: Comparing overlapping groups
- From: David Hoaglin <dchoaglin@gmail.com>
- st: Combination of a multinomial logit model and a logit model
- From: Saki Tapsell <sakiuchiyama@gmail.com>
- Re: st: Bootstrapping with sampling weights?
- From: Michael Boehm <michael.boehm1@gmail.com>
- st: Truncated sample or Heckman selection
- From: Ebru Ozturk <ebru_0512@hotmail.com>
- Re: st: Comparing overlapping groups
- From: Fred Wolfe <fwolfe@arthritis-research.org>
- Re: st: Outreg for asclogit
- From: Wameq Raza <wameq.r@gmail.com>
- st: Dissimilarity matrix in sequence/cluster analysis
- From: Sarah Park <sarahjwpark@gmail.com>
- st: Observations in Sequence analysis
- From: Sarah Park <sarahjwpark@gmail.com>
- st: marginsplot
- From: Melvyn Weeks <mw217@cam.ac.uk>
- RE: st: Quantile Regression
- From: "Santos Silva, J.M.C." <jmcss@essex.ac.uk>
- Re: st: Epoch time (aka Unix time) in Stata
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Conversion from string to numeric with imported excel document
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Problem with using loop and graph combine
- From: Nick Cox <njcoxstata@gmail.com>
- st: eststo and factor variables
- From: "Fabian Schönenberger" <sch.f@gmx.ch>
- Re: st: Outreg for asclogit
- From: John Luke Gallup <jlgallup@pdx.edu>
- st: Epoch time (aka Unix time) in Stata
- From: Michael Costello <michaelavcostello@gmail.com>
- st: FW: SEM
- From: "Tucker, Graeme (Health)" <Graeme.Tucker@health.sa.gov.au>
- Re: st: Quantile Regression
- From: Robert Davidson <rhd773@gmail.com>
- Re: st: Transform logit coef and use in -estout- -esttab-
- From: RV Rikard <rvrikard@ncsu.edu>
- Re: st: Quantile Regression
- From: "JVerkuilen (Gmail)" <jvverkuilen@gmail.com>
- st: Problem with using loop and graph combine
- From: saeid shahraz <shahraz@gmail.com>
- st: Conversion from string to numeric with imported excel document
- From: Ryan Stevens <stevrl7@gmail.com>
- Re: st: Adding a variable to a panel dataset
- From: Jason Hecht <jayhstata@gmail.com>
- Re: st: Quantile Regression
- From: Steve Samuels <sjsamuels@gmail.com>
- Re: st: Quantile Regression
- From: Steve Samuels <sjsamuels@gmail.com>
- st: Running Stata in batch mode on enterprise machine
- From: Art Burke <Art.Burke@educationnorthwest.org>
- st: Calculating proportional growth rate in stata and do-it files
- From: Georgia LockwoodEstrin <georgiale@googlemail.com>
- Re: st: zoom on histograms
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Bootstrapping with sampling weights?
- From: Stas Kolenikov <skolenik@gmail.com>
- st: zoom on histograms
- From: patrick patrick <verbatimo@hotmail.fr>
- RE: st: problem with ineqdeco & remote access
- From: <S.Jenkins@lse.ac.uk>
- st: Outreg for asclogit
- From: Wameq Raza <wameq.r@gmail.com>
- st: Quantile Regression
- From: Robert Davidson <rhd773@gmail.com>
- Re: st: summary statistics
- From: Donald Spady <dspady@ualberta.ca>
- Re: st: repeated factor ANOVA
- From: James prince <jsprince26@gmail.com>
- Re: st: problem with ineqdeco & remote access
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Adding a variable to a panel dataset
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- Re: st: Using xtmixed with a regional-level DV
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- st: problem with ineqdeco & remote access
- From: simone scarpa <scarpa.simone@gmail.com>
- Re: st: Using xtmixed with a regional-level DV
- From: Atul Teckchandani <atulteck@hotmail.com>
- Re: st: Adding a variable to a panel dataset
- From: Jason Hecht <jayhstata@gmail.com>
- st: Bootstrapping with sampling weights?
- From: Michael Boehm <michael.boehm1@gmail.com>
- re: Re: st: Matching samples in Stata
- From: "Ariel Linden, DrPH" <ariel.linden@gmail.com>
- Re: st: Matching samples in Stata
- From: David Kantor <kantor.d@att.net>
- RE: st: Heckman inclusion extra variables in the outcome equation
- From: Jan Wynen <Jan.Wynen@kuleuven.be>
- st: Re: table to latex
- From: Pierre-Louis Vezina <pierre-louis.vezina@graduateinstitute.ch>
- Re: st: Comparing overlapping groups
- From: David Hoaglin <dchoaglin@gmail.com>
- Re: st: Heckman inclusion extra variables in the outcome equation
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- Re: st: repeated factor ANOVA
- From: Philip Ender <ender97@gmail.com>
- Re: st: Adding a variable to a panel dataset
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- st: Comparing overlapping groups
- From: Fred Wolfe <fwolfe@arthritis-research.org>
- st: Heckman inclusion extra variables in the outcome equation
- From: Jan Wynen <Jan.Wynen@kuleuven.be>
- Re: st: Using xtmixed with a regional-level DV
- From: Joerg Luedicke <joerg.luedicke@gmail.com>
- RE: st: RE: RE: assigning a specific row as a local variable
- From: Pradipto Banerjee <pradipto.banerjee@adainvestments.com>
- Re: st: contrasts
- From: Nikolaos Pandis <npandis@yahoo.com>
- st: psmatch2 - exact matching with mahalanobis metric
- From: Vincenzo Mariani <vincemar81@gmail.com>
- st: repeated factor ANOVA
- From: James prince <jsprince26@gmail.com>
- Re: st: summary statistics
- From: Lars Folkestad <lfolkestad@health.sdu.dk>
- Re: st: Matching samples in Stata
- From: Paula Arce <paulaarce@rocketmail.com>
- Re: st: cascading dummies
- From: Maarten Buis <maartenlbuis@gmail.com>
- Re: st: RE: RE: assigning a specific row as a local variable
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: How to Graph - Exponential model
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: Using xtmixed with a regional-level DV
- From: Atul Teckchandani <atulteck@hotmail.com>
- Re: st: Adding a variable to a panel dataset
- From: Jason Hecht <jayhstata@gmail.com>
- Re: st: contrasts
- From: Jeffrey Pitblado <jpitblado@stata.com>
- Re: st: RE: RE: assigning a specific row as a local variable
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: Looping within a subset under a certain condition
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: cascading dummies
- From: Shikha Sinha <shikha.sinha414@gmail.com>
- st: RE: RE: assigning a specific row as a local variable
- From: Pradipto Banerjee <pradipto.banerjee@adainvestments.com>
- st: RE: assigning a specific row as a local variable
- From: "David Radwin" <dradwin@mprinc.com>
- st: assigning a specific row as a local variable
- From: Pradipto Banerjee <pradipto.banerjee@adainvestments.com>
- RE: st: Looping within a subset under a certain condition
- From: "Gerard Solbrig" <gsolbrig@mail.uni-mannheim.de>
- Re: st: bsqreg getting stuck
- From: Steve Samuels <sjsamuels@gmail.com>
- Re: st: cascading dummies
- From: Shikha Sinha <shikha.sinha414@gmail.com>
- Re: st: contrasts
- From: Nikolaos Pandis <npandis@yahoo.com>
- Re: st: How to Graph - Exponential model
- From: "Heather Sun, MD" <heather.sun@stanford.edu>
- Re: st: How to Graph - Exponential model
- From: Richard Goldstein <richgold@ix.netcom.com>
- Re: st: separating components of a string variable
- From: Richard Goldstein <richgold@ix.netcom.com>
- Re: st: separating components of a string variable
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: separating components of a string variable
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: separating components of a string variable
- From: Richard Goldstein <richgold@ix.netcom.com>
- st: How to Graph - Exponential model
- From: "Heather Sun, MD" <heather.sun@stanford.edu>
- st: separating components of a string variable
- From: Mahbubeh Parsaeian <mahbobehparsaeian@yahoo.com>
- Re: st: Converting text file to Stata data file
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: cascading dummies
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: cascading dummies
- From: Richard Goldstein <richgold@ix.netcom.com>
- Re: st: cascading dummies
- From: Shikha Sinha <shikha.sinha414@gmail.com>
- st: Converting text file to Stata data file
- From: Michael Eisenberg <meisenberg713@gmail.com>
- Re: st: cascading dummies
- From: Richard Goldstein <richgold@ix.netcom.com>
- st: cascading dummies
- From: Shikha Sinha <shikha.sinha414@gmail.com>
- Re: st: Identify duplicate observations by a varlist, then drop them based on other variables
- From: Aaron Kirkman <ak1795mailserv@gmail.com>
- Re: st: bsqreg getting stuck
- From: Nick Cox <njcoxstata@gmail.com>
- st: bsqreg getting stuck
- From: Stuart Craig <svc8@cornell.edu>
- Re: st: Looping within a subset under a certain condition
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: summary statistics
- From: Donald Spady <dspady@ualberta.ca>
- RE: st: Looping within a subset under a certain condition
- From: "Gerard Solbrig" <gsolbrig@mail.uni-mannheim.de>
- Re: st: dynamic graphs
- From: Nick Cox <njcoxstata@gmail.com>
- Re: st: dynamic graphs
- From: Rodrigo Briceño <rjbriceno@gmail.com>
- Re: st: Matching samples in Stata
- From: David Kantor <kantor.d@att.net>
- Re: st: summary statistics
- From: Nick Cox <njcoxstata@gmail.com>
- st: summary statistics
- From: Clyde B Schechter <clyde.schechter@einstein.yu.edu>
- Re: st: contrasts
- From: Jeff Pitblado <jpitblado@stata.com>
- st: two endogenous varaibles with xtabond2
- From: "Lovisa Persson" <lovisa.persson@nek.uu.se>
- st: Draw a random sample of my data and merge with original paneldata
- st: R squared after cnsreg estimation
- From: Fo Kodjo Dzinyefa Alphonse AFLAGAH <alphonseflag@yahoo.fr>
- Re: st: Matching samples in Stata
- From: Paula Arce <paulaarce@rocketmail.com>
- Re: st: Matching samples in Stata
- From: Nick Cox <njcoxstata@gmail.com>
- st: Retaining bookmarks in do-file editor across sessions?
- From: Bert Lloyd <bert.lloyd.89@gmail.com>
- Re: st: Matching samples in Stata
- From: Paula Arce <paulaarce@rocketmail.com>
- Re: st: Matching samples in Stata
- From: Nick Cox <njcoxstata@gmail.com>
- st: contrasts
- From: Nikolaos Pandis <npandis@yahoo.com>
- Re: st: Matching samples in Stata
- From: Wameq Raza <wameq.r@gmail.com>
- st: Interpretation - margins - command and tobit model
- From: Fabien Bertho <fabien.bertho@sciences-po.org>
- st: Matching samples in Stata
- From: Paula Arce <paulaarce@rocketmail.com>
- RE: st: Difference between two age-specific incidence rates and IRR following Poisson regression
- From: Tim Evans <Tim.Evans@wmciu.nhs.uk>
- Re: st: Difference between two age-specific incidence rates and IRR following Poisson regression
- From: "smztsmzt" <smztsmzt@163.com>
- Re: st: Adding a variable to a panel dataset
- From: Christopher Baum <kit.baum@bc.edu>
- st: Stata Journal 12:3
- From: Christopher Baum <kit.baum@bc.edu>
- st: Difference between two age-specific incidence rates and IRR following Poisson regression
- From: Tim Evans <Tim.Evans@wmciu.nhs.uk>
- Re: st: Fixed effects vector decomposition
- From: Nick Cox <njcoxstata@gmail.com>
- st: Fixed effects vector decomposition
- From: fernando luiz mistura <f_mistura@hotmail.com>
- Re: st: Appropriate modelling - testing which set of exposures are more important
- From: Maarten Buis <maartenlbuis@gmail.com>
- st: Need to change omitted category based on *estimated results*
- From: "Matthew Mercurio" <matthewmercurio@fscgroup.com>
- Re: Re: st: How to deal with the quasi-complete separation problem in the logit part of ZINB analysis
- From: "smztsmzt" <smztsmzt@163.com>
Mail converted by MHonArc