Statalist The Stata Listserver


[Date Prev][Date Next][Thread Prev][Thread Next][Date index][Thread index]

RE: st: RE: xtivreg2 error message "option properties() not allowed"


From   "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
To   <statalist@hsphsun2.harvard.edu>
Subject   RE: st: RE: xtivreg2 error message "option properties() not allowed"
Date   Thu, 1 Mar 2007 18:16:40 -0000

Wolfgang, 

> -----Original Message-----
> From: owner-statalist@hsphsun2.harvard.edu 
> [mailto:owner-statalist@hsphsun2.harvard.edu] On Behalf Of 
> Wolfgang Keller
> Sent: Thursday, March 01, 2007 6:01 PM
> To: statalist@hsphsun2.harvard.edu
> Subject: RE: st: RE: xtivreg2 error message "option 
> properties() not allowed"
> 
> Mark,
> thanks--here is the output of the "which xx" commands. Wolfgang

Right, that's enough to go on.  Simple mistake - I didn't mail the
xtivreg2 update to Kit for posting on ssc-ideas.  Oops.

Should be available in a couple of days or so.  Sorry about that!!

--Mark

> . which ivreg2, all
> 
> c:\ado\plus\i\ivreg2.ado
> *! ivreg2 2.1.21  5Feb2007
> *! authors cfb & mes
> *! cloned from official ivreg version 5.0.9  19Dec2001 *! see 
> end of file for version comments
> 
> . which ivreg28, all
> 
> c:\ado\plus\i\ivreg28.ado
> *! ivreg28 2.1.21  5Feb2007
> *! authors cfb & mes
> *! cloned from official ivreg version 5.0.9  19Dec2001 *! see 
> end of file for version comments
> 
> . which xtivreg2, all
> 
> c:\ado\plus\x\xtivreg2.ado
> *! xtivreg2 1.0.04 11Jan2007
> *! author mes
> 
> 
> ---- Original message ----
> >Date: Thu, 1 Mar 2007 17:02:51 -0000
> >From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
> >Subject: RE: st: RE: xtivreg2 error message "option 
> properties() not allowed"  
> >To: <statalist@hsphsun2.harvard.edu>
> >
> >Wolfgang,
> >
> >> -----Original Message-----
> >> From: owner-statalist@hsphsun2.harvard.edu
> >> [mailto:owner-statalist@hsphsun2.harvard.edu] On Behalf Of 
> Wolfgang 
> >> Keller
> >> Sent: Thursday, March 01, 2007 4:45 PM
> >> To: statalist@hsphsun2.harvard.edu
> >> Subject: Re: st: RE: xtivreg2 error message "option
> >> properties() not allowed"
> >> 
> >> Nick and Austin,
> >> 
> >> thanks. Discard did not solve the problem. -sysdir- did reveal a 
> >> number of directories, some old.
> >> 
> >> 
> >> . sysdir
> >>    STATA:  C:\Stata8\
> >>  UPDATES:  C:\Stata8\ado\updates\
> >>     BASE:  C:\Stata8\ado\base\
> >>     SITE:  C:\Stata8\ado\site\
> >>     PLUS:  c:\ado\plus\
> >> PERSONAL:  c:\ado\personal\
> >> OLDPLACE:  c:\ado\
> >> 
> >> But I've searched and deleted all ivreg2 files now, installed
> >> ivreg28 again, as well as xtivreg2 -- and it still says
> >> 
> >> "Error - must have ivreg2 version 2.1.15 or greater installed"
> >> when I try to run xtivreg2.
> >> 
> >> Any more ideas?
> >
> >Try
> >
> >which ivreg2, all
> >
> >which ivreg28, all
> >
> >which xtivreg2, all
> >
> >and let us see the output of what comes up.
> >
> >--Mark
> >
> >> thanks, w
> >> 
> >> 
> >> 
> >> ---- Original message ----
> >> >Date: Thu, 1 Mar 2007 11:14:02 -0500
> >> >From: "Austin Nichols" <austinnichols@gmail.com>
> >> >Subject: Re: st: RE: xtivreg2 error message "option
> >> properties() not allowed"  
> >> >To: statalist@hsphsun2.harvard.edu
> >> >
> >> >Wolfgang--
> >> >Both work fine on my copy of Stata 8. Are installing using -ssc
> >> >install- to the same set of folders?  You may have multiple
> >> copies of
> >> >the ado files, with an older one higher in the -sysdir- 
> search path.
> >> >Try -sysdir- and search for xtivreg2.ado and ivreg28.ado 
> in each of 
> >> >those directories.
> >> >
> >> >On 3/1/07, Wolfgang Keller <Wolfgang.Keller@colorado.edu> wrote:
> >> >> Mark,
> >> >>
> >> >> thanks, I've tried updating the xtivreg2 and installing
> >> the ivreg28. Still no luck. The error message of the 
> xtivreg2 is in 
> >> fact the same (it doesn't seem to look for the ivreg28).
> >> >>
> >> >> Thanks, Wolfgang.
> >> >>
> >> >> ---- Original message ----
> >> >> >Date: Thu, 1 Mar 2007 14:17:30 -0000
> >> >> >From: "Schaffer, Mark E" <M.E.Schaffer@hw.ac.uk>
> >> >> >Subject: st: RE: xtivreg2 error message "option
> >> properties() not allowed"
> >> >> >To: <statalist@hsphsun2.harvard.edu>
> >> >> >
> >> >> >Wolfgang,
> >> >> >
> >> >> >> -----Original Message-----
> >> >> >> From: owner-statalist@hsphsun2.harvard.edu
> >> >> >> [mailto:owner-statalist@hsphsun2.harvard.edu] On Behalf Of 
> >> >> >> Wolfgang Keller
> >> >> >> Sent: Wednesday, February 28, 2007 9:11 PM
> >> >> >> To: statalist@hsphsun2.harvard.edu
> >> >> >> Subject: st: xtivreg2 error message "option
> >> properties() not allowed"
> >> >> >>
> >> >> >> Hello everybody,
> >> >> >>
> >> >> >> Using xtivreg2, I'm trying to replicate the
> >> Layard/Nickell example
> >> >> >> of the xtivreg2 help file. It's not working. My STATA
> >> version is
> >> >> >> 8.2.
> >> >> >> There are a number of error messages, see below. It
> >> points to an
> >> >> >> old version of ivreg2 being used, but that is not 
> the case--has 
> >> >> >> just been updated using ssc install ivreg2, replace.
> >> >> >> any ideas?
> >> >> >
> >> >> >I answered this earlier today.... check the archives if
> >> you missed it:
> >> >> >
> >> >> >http://www.stata.com/statalist/archive/2007-03/msg00000.html
> >> >> >
> >> >> >--Mark
> >> >> >
> >> >> >>
> >> >> >> thanks, wolfgang.
> >> >> >>
> >> >> >> -------------------------------
> >> >> >>   xtivreg2 ys k (n=l.n l2.n), fd small first option
> >> >> >> properties() not allowed Error - must have ivreg2 version
> >> >> >> 2.1.15 or greater installed r(601);
> >> >> >>
> >> >> >>   which ivreg2, all
> >> >> >>
> >> >> >> c:\ado\plus\i\ivreg2.ado
> >> >> >> *! ivreg2 2.1.21  5Feb2007
> >> >> >> *! authors cfb & mes
> >> >> >> *! cloned from official ivreg version 5.0.9  19Dec2001
> >> *! see end
> >> >> >> of file for version comments
> >> >> >>
> >> >> >>   ivreg2 d.ys d.k (d.n=ld.n ld2.n), small first option
> >> >> >> properties() not allowed (error occurred while loading
> >> >> >> ivreg2.ado) r(198);
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> -------------
> >> >> >> Wolfgang Keller
> >> >> >> Department of Economics
> >> >> >> 256 University of Colorado at Boulder Boulder, CO 80309
> >> >> >> Ph: +1 303 735 5507
> >> >> >> Fax: +1 303 492 8960
> >> >> >> http://spot.colorado.edu/~kellerw
> >> >> >>
> >> >> >> *
> >> >> >> *   For searches and help try:
> >> >> >> *   http://www.stata.com/support/faqs/res/findit.html
> >> >> >> *   http://www.stata.com/support/statalist/faq
> >> >> >> *   http://www.ats.ucla.edu/stat/stata/
> >> >> >>
> >> >> >
> >> >> >*
> >> >> >*   For searches and help try:
> >> >> >*   http://www.stata.com/support/faqs/res/findit.html
> >> >> >*   http://www.stata.com/support/statalist/faq
> >> >> >*   http://www.ats.ucla.edu/stat/stata/
> >> >> *
> >> >> *   For searches and help try:
> >> >> *   http://www.stata.com/support/faqs/res/findit.html
> >> >> *   http://www.stata.com/support/statalist/faq
> >> >> *   http://www.ats.ucla.edu/stat/stata/
> >> >>
> >> >*
> >> >*   For searches and help try:
> >> >*   http://www.stata.com/support/faqs/res/findit.html
> >> >*   http://www.stata.com/support/statalist/faq
> >> >*   http://www.ats.ucla.edu/stat/stata/
> >> *
> >> *   For searches and help try:
> >> *   http://www.stata.com/support/faqs/res/findit.html
> >> *   http://www.stata.com/support/statalist/faq
> >> *   http://www.ats.ucla.edu/stat/stata/
> >> 
> >
> >*
> >*   For searches and help try:
> >*   http://www.stata.com/support/faqs/res/findit.html
> >*   http://www.stata.com/support/statalist/faq
> >*   http://www.ats.ucla.edu/stat/stata/
> *
> *   For searches and help try:
> *   http://www.stata.com/support/faqs/res/findit.html
> *   http://www.stata.com/support/statalist/faq
> *   http://www.ats.ucla.edu/stat/stata/
> 

*
*   For searches and help try:
*   http://www.stata.com/support/faqs/res/findit.html
*   http://www.stata.com/support/statalist/faq
*   http://www.ats.ucla.edu/stat/stata/



© Copyright 1996–2014 StataCorp LP   |   Terms of use   |   Privacy   |   Contact us   |   What's new   |   Site index